[alsa-devel] [PATCH] drm: bridge/dw_hdmi: add audio sample channel status setting
Neil Armstrong
narmstrong at baylibre.com
Tue Sep 3 11:53:33 CEST 2019
Hi,
On 03/09/2019 07:51, Cheng-Yi Chiang wrote:
> From: Yakir Yang <ykk at rock-chips.com>
>
> When transmitting IEC60985 linear PCM audio, we configure the
> Audio Sample Channel Status information of all the channel
> status bits in the IEC60958 frame.
> Refer to 60958-3 page 10 for frequency, original frequency, and
> wordlength setting.
>
> This fix the issue that audio does not come out on some monitors
> (e.g. LG 22CV241)
>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> Signed-off-by: Cheng-Yi Chiang <cychiang at chromium.org>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 59 +++++++++++++++++++++++
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 20 ++++++++
> 2 files changed, 79 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index bd65d0479683..34d46e25d610 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -582,6 +582,63 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
> return n;
> }
>
> +static void hdmi_set_schnl(struct dw_hdmi *hdmi)
> +{
> + u8 aud_schnl_samplerate;
> + u8 aud_schnl_8;
> +
> + /* These registers are on RK3288 using version 2.0a. */
> + if (hdmi->version != 0x200a)
> + return;
Are these limited to the 2.0a version *in* RK3288, or 2.0a version on all
SoCs ?
> +
> + switch (hdmi->sample_rate) {
> + case 32000:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_32K;
> + break;
> + case 44100:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_44K1;
> + break;
> + case 48000:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_48K;
> + break;
> + case 88200:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_88K2;
> + break;
> + case 96000:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_96K;
> + break;
> + case 176400:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_176K4;
> + break;
> + case 192000:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_192K;
> + break;
> + case 768000:
> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_768K;
> + break;
> + default:
> + dev_warn(hdmi->dev, "Unsupported audio sample rate (%u)\n",
> + hdmi->sample_rate);
> + return;
> + }
> +
> + /* set channel status register */
> + hdmi_modb(hdmi, aud_schnl_samplerate, HDMI_FC_AUDSCHNLS7_SMPRATE_MASK,
> + HDMI_FC_AUDSCHNLS7);
> +
> + /*
> + * Set original frequency to be the same as frequency.
> + * Use one-complement value as stated in IEC60958-3 page 13.
> + */
> + aud_schnl_8 = (~aud_schnl_samplerate) <<
> + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET;
> +
> + /* This means word length is 16 bit. Refer to IEC60958-3 page 12. */
> + aud_schnl_8 |= 2 << HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET;
> +
> + hdmi_writeb(hdmi, aud_schnl_8, HDMI_FC_AUDSCHNLS8);
> +}
> +
> static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> unsigned long pixel_clk, unsigned int sample_rate)
> {
> @@ -620,6 +677,8 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> hdmi->audio_cts = cts;
> hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0);
> spin_unlock_irq(&hdmi->audio_lock);
> +
> + hdmi_set_schnl(hdmi);
> }
>
> static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> index 6988f12d89d9..619ebc1c8354 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> @@ -158,6 +158,17 @@
> #define HDMI_FC_SPDDEVICEINF 0x1062
> #define HDMI_FC_AUDSCONF 0x1063
> #define HDMI_FC_AUDSSTAT 0x1064
> +#define HDMI_FC_AUDSV 0x1065
> +#define HDMI_FC_AUDSU 0x1066
> +#define HDMI_FC_AUDSCHNLS0 0x1067
> +#define HDMI_FC_AUDSCHNLS1 0x1068
> +#define HDMI_FC_AUDSCHNLS2 0x1069
> +#define HDMI_FC_AUDSCHNLS3 0x106a
> +#define HDMI_FC_AUDSCHNLS4 0x106b
> +#define HDMI_FC_AUDSCHNLS5 0x106c
> +#define HDMI_FC_AUDSCHNLS6 0x106d
> +#define HDMI_FC_AUDSCHNLS7 0x106e
> +#define HDMI_FC_AUDSCHNLS8 0x106f
> #define HDMI_FC_DATACH0FILL 0x1070
> #define HDMI_FC_DATACH1FILL 0x1071
> #define HDMI_FC_DATACH2FILL 0x1072
> @@ -706,6 +717,15 @@ enum {
> /* HDMI_FC_AUDSCHNLS7 field values */
> HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
> HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_MASK = 0x0f,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_192K = 0xe,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_176K4 = 0xc,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_96K = 0xa,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_768K = 0x9,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_88K2 = 0x8,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_32K = 0x3,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_48K = 0x2,
> + HDMI_FC_AUDSCHNLS7_SMPRATE_44K1 = 0x0,
>
> /* HDMI_FC_AUDSCHNLS8 field values */
> HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
>
More information about the Alsa-devel
mailing list