[alsa-devel] [PATCH 2/3] dt-bindings: sound: Add Xilinx logicPD-I2S FPGA IP bindings

[Miquel Raynal]

Hi Rob,

Thanks for the review, one question below.

Rob Herring <robh at kernel.org> wrote on Mon, 02 Sep 2019 14:39:09 +0100:

> On Fri, Aug 30, 2019 at 11:06:06PM +0200, Miquel Raynal wrote:
> > Document the logicPD I2S FPGA block bindings in yaml.
> > 
> > Syntax verified with dt-doc-validate.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> > ---
> >  .../bindings/sound/xlnx,logicpd-i2s.yaml      | 57 +++++++++++++++++++
> >  1 file changed, 57 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml b/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml
> > new file mode 100644
> > index 000000000000..cbff641af199
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml
> > @@ -0,0 +1,57 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/xlnx,logicpd-i2s.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Device-Tree bindings for Xilinx logicPD I2S FPGA block
> > +
> > +maintainers:
> > +  - Miquel Raynal <miquel.raynal at bootlin.com>
> > +
> > +description: |
> > +  The IP supports I2S playback/capture audio. It acts as a slave and
> > +  clocks should come from the codec. It only supports two channels and
> > +  S16_LE format.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: xlnx,logicpd-i2s
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description:
> > +      Base address and size of the IP core instance.
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - description: tx interrupt
> > +      - description: rx interrupt
> > +    description:
> > +      Either the Tx interruption or the Rx interruption or both.  
> 
> The schema says either tx or both. Doesn't really matter here as it's 
> just numbers.

I see , I'll drop the 'items' entry.

> 
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - const: tx
> > +      - const: rx  
> 
> But here it does matter.
> 
> The easiest way to express this is:
> 
> oneOf:
>   - items:
>       - enum: [ tx, rx ]
>   - items:
>       - const: tx
>       - const: rx
> 

Does this enforce an order? (I don't know if it matters, though, but in
the bellow example I put the Rx interrupt first).

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupts-controller
> > +
> > +examples:
> > +  - |
> > +    logii2s_dai: logii2s-dai at 43c10000 {
> > +        reg = <0x43c10000 0x1000>;
> > +        compatible = "xlnx,logicpd-i2s-dai";
> > +        interrupt-parent = <&intc>;
> > +        interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-names = "rx", "tx";
> > +    };
> > -- 
> > 2.20.1
> >   
> 

Thanks,
Miquèl