[alsa-devel] [PATCH] drm: dw-hdmi-i2s: enable audio clock in audio_startup

Cheng-yi Chiang cychiang at chromium.org
Mon Sep 2 04:06:55 CEST 2019


On Sun, Sep 1, 2019 at 6:04 PM Jonas Karlman <jonas at kwiboo.se> wrote:
>
> On 2019-08-29 06:29, Cheng-Yi Chiang wrote:
> > In the designware databook, the sequence of enabling audio clock and
> > setting format is not clearly specified.
> > Currently, audio clock is enabled in the end of hw_param ops after
> > setting format.
> >
> > On some monitors, there is a possibility that audio does not come out.
> > Fix this by enabling audio clock in audio_startup ops
> > before hw_param ops setting format.
> >
> > Signed-off-by: Cheng-Yi Chiang <cychiang at chromium.org>
> > ---
> >  drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > index 5cbb71a866d5..08b4adbb1ddc 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
> >       hdmi_write(audio, conf0, HDMI_AUD_CONF0);
> >       hdmi_write(audio, conf1, HDMI_AUD_CONF1);
> >
> > +     return 0;
> > +}
> > +
> > +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
> > +{
> > +     struct dw_hdmi_i2s_audio_data *audio = data;
> > +     struct dw_hdmi *hdmi = audio->hdmi;
> > +
> >       dw_hdmi_audio_enable(hdmi);
> >
> >       return 0;
> > @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
> >  }
> >
> >  static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> > +     .audio_startup = dw_hdmi_i2s_audio_startup,
>
> A small white space nit, there should be a tab and not space to align the equal sign above.

ACK. Will fix in v2.
>
> Also this patch do not cleanly apply to drm-misc-next or linux-next after
> fc1ca6e01d0a "drm/bridge: dw-hdmi-i2s: add .get_eld support" was merged.

ACK. Will rebase in v2.
>
>
>
>
> This patch does fix an issue I have observed on my Rockchip devices where audio would not always
> came out after switching between audio streams having different rate and channels parameters.
> I used to carry [1] to fix that issue, but this seems like a more sane fix.
>
> [1] https://github.com/Kwiboo/linux-rockchip/commit/4862e4044532b8b480fa3a0faddc197586623808
>
> With above fixed,
>
> Reviewed-by: Jonas Karlman <jonas at kwiboo.se>


Thanks a lot!

>
>
> Regards,
> Jonas
>
> >       .hw_params      = dw_hdmi_i2s_hw_params,
> >       .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
> >       .get_dai_id     = dw_hdmi_i2s_get_dai_id,
>


More information about the Alsa-devel mailing list