[alsa-devel] Applied "ASoC: rt1011: remove unnecessary tabs using spaces instead" to the asoc tree
Mark Brown
broonie at kernel.org
Thu Oct 31 14:23:36 CET 2019
The patch
ASoC: rt1011: remove unnecessary tabs using spaces instead
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 270d1b39b006a408e35278d4b64b2c4e1945adf0 Mon Sep 17 00:00:00 2001
From: Shuming Fan <shumingf at realtek.com>
Date: Thu, 31 Oct 2019 19:54:25 +0800
Subject: [PATCH] ASoC: rt1011: remove unnecessary tabs using spaces instead
There are unnecessary tabs inside some statements.
It uses sapces instead.
Signed-off-by: Shuming Fan <shumingf at realtek.com>
Link: https://lore.kernel.org/r/20191031115425.21003-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/codecs/rt1011.c | 45 +++++++++++++++++++--------------------
1 file changed, 22 insertions(+), 23 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 57a3a34b5f18..2f1de933f3ac 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -989,7 +989,7 @@ static SOC_ENUM_SINGLE_DECL(rt1011_din_source_enum, RT1011_CROSS_BQ_SET_1, 5,
static const char * const rt1011_tdm_data_out_select[] = {
"TDM_O_LR", "BQ1", "DVOL", "BQ10", "ALC", "DMIX", "ADC_SRC_LR",
- "ADC_O_LR", "ADC_MONO", "RSPK_BPF_LR", "DMIX_ADD", "ENVELOPE_FS",
+ "ADC_O_LR", "ADC_MONO", "RSPK_BPF_LR", "DMIX_ADD", "ENVELOPE_FS",
"SEP_O_GAIN", "ALC_BK_GAIN", "STP_V_C", "DMIX_ABST"
};
@@ -1002,7 +1002,7 @@ static SOC_ENUM_SINGLE_DECL(rt1011_tdm2_l_dac1_enum, RT1011_TDM2_SET_4, 12,
rt1011_tdm_l_ch_data_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_dat_enum,
- RT1011_ADCDAT_OUT_SOURCE, 0, rt1011_tdm_data_out_select);
+ RT1011_ADCDAT_OUT_SOURCE, 0, rt1011_tdm_data_out_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_loc_enum, RT1011_TDM1_SET_2, 0,
rt1011_tdm_l_ch_data_select);
@@ -1024,9 +1024,9 @@ static const char * const rt1011_tdm_adc_swap_select[] = {
"L/R", "R/L", "L/L", "R/R"
};
-static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6,
+static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6,
rt1011_tdm_adc_swap_select);
-static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4,
+static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4,
rt1011_tdm_adc_swap_select);
static void rt1011_reset(struct regmap *regmap)
@@ -1092,9 +1092,9 @@ static bool rt1011_validate_bq_drc_coeff(unsigned short reg)
{
if ((reg == RT1011_DAC_SET_1) |
(reg >= RT1011_ADC_SET && reg <= RT1011_ADC_SET_1) |
- (reg == RT1011_ADC_SET_4) | (reg == RT1011_ADC_SET_5) |
+ (reg == RT1011_ADC_SET_4) | (reg == RT1011_ADC_SET_5) |
(reg == RT1011_MIXER_1) |
- (reg == RT1011_A_TIMING_1) | (reg >= RT1011_POWER_7 &&
+ (reg == RT1011_A_TIMING_1) | (reg >= RT1011_POWER_7 &&
reg <= RT1011_POWER_8) |
(reg == RT1011_CLASS_D_POS) | (reg == RT1011_ANALOG_CTRL) |
(reg >= RT1011_SPK_TEMP_PROTECT_0 &&
@@ -1289,7 +1289,7 @@ static int rt1011_r0_load_mode_put(struct snd_kcontrol *kcontrol,
r0_integer = format / rt1011->r0_reg / 128;
r0_factor = ((format / rt1011->r0_reg * 100) / 128)
- (r0_integer * 100);
- dev_info(dev, "New r0 resistance about %d.%02d ohm, reg=0x%X\n",
+ dev_info(dev, "New r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, rt1011->r0_reg);
if (rt1011->r0_reg)
@@ -1977,14 +1977,14 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai,
snd_soc_component_update_bits(component, RT1011_TDM1_SET_1,
RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK |
- RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
+ RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
snd_soc_component_update_bits(component, RT1011_TDM2_SET_1,
RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK |
- RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
+ RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
snd_soc_component_update_bits(component, RT1011_TDM1_SET_2,
- RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en);
+ RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en);
snd_soc_component_update_bits(component, RT1011_TDM2_SET_2,
- RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en);
+ RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en);
if (tx_slotnum)
snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET,
RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG,
@@ -2109,7 +2109,7 @@ static const struct snd_soc_component_driver soc_component_dev_rt1011 = {
.remove = rt1011_remove,
.suspend = rt1011_suspend,
.resume = rt1011_resume,
- .set_bias_level = rt1011_set_bias_level,
+ .set_bias_level = rt1011_set_bias_level,
.controls = rt1011_snd_controls,
.num_controls = ARRAY_SIZE(rt1011_snd_controls),
.dapm_widgets = rt1011_dapm_widgets,
@@ -2118,9 +2118,9 @@ static const struct snd_soc_component_driver soc_component_dev_rt1011 = {
.num_dapm_routes = ARRAY_SIZE(rt1011_dapm_routes),
.set_sysclk = rt1011_set_component_sysclk,
.set_pll = rt1011_set_component_pll,
- .use_pmdown_time = 1,
- .endianness = 1,
- .non_legacy_dai_naming = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
};
static const struct regmap_config rt1011_regmap = {
@@ -2222,17 +2222,17 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_ADC_OFFSET_15_0, &value);
dc_offset |= (value & 0xffff);
- dev_info(dev, "ADC offset=0x%x\n", dc_offset);
+ dev_info(dev, "ADC offset=0x%x\n", dc_offset);
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_20_16, &value);
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_15_0, &value);
dc_offset |= (value & 0xffff);
- dev_info(dev, "Gain0 offset=0x%x\n", dc_offset);
+ dev_info(dev, "Gain0 offset=0x%x\n", dc_offset);
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_20_16, &value);
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_15_0, &value);
dc_offset |= (value & 0xffff);
- dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
+ dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
if (cali_flag) {
@@ -2252,7 +2252,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
while (count < chk_cnt) {
msleep(100);
regmap_read(rt1011->regmap,
- RT1011_INIT_RECIPROCAL_SYN_24_16, &value);
+ RT1011_INIT_RECIPROCAL_SYN_24_16, &value);
r0[count%3] = value << 16;
regmap_read(rt1011->regmap,
RT1011_INIT_RECIPROCAL_SYN_15_0, &value);
@@ -2267,7 +2267,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
break;
}
if (count > chk_cnt) {
- dev_err(dev, "Calibrate R0 Failure\n");
+ dev_err(dev, "Calibrate R0 Failure\n");
ret = -EAGAIN;
} else {
format = 2147483648U; /* 2^24 * 128 */
@@ -2276,7 +2276,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
- (r0_integer * 100);
rt1011->r0_reg = r0[0];
rt1011->cali_done = 1;
- dev_info(dev, "r0 resistance about %d.%02d ohm, reg=0x%X\n",
+ dev_info(dev, "r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, r0[0]);
}
}
@@ -2354,7 +2354,7 @@ static void rt1011_calibration_work(struct work_struct *work)
r0_integer = format / rt1011->r0_reg / 128;
r0_factor = ((format / rt1011->r0_reg * 100) / 128)
- (r0_integer * 100);
- dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n",
+ dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, rt1011->r0_reg);
rt1011_r0_load(rt1011);
@@ -2420,7 +2420,6 @@ static void rt1011_i2c_shutdown(struct i2c_client *client)
rt1011_reset(rt1011->regmap);
}
-
static struct i2c_driver rt1011_i2c_driver = {
.driver = {
.name = "rt1011",
--
2.20.1
More information about the Alsa-devel
mailing list