[alsa-devel] [PATCH v2 01/11] ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec

[Srinivas Kandagatla]

Thanks Rob for the review.

On 25/10/2019 21:43, Rob Herring wrote:
> On Fri, Oct 18, 2019 at 01:18:39AM +0100, Srinivas Kandagatla wrote:
>> This patch adds bindings for wcd9340/wcd9341 audio codec which can
>> support both SLIMbus and I2S/I2C interface.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> ---
>>   .../bindings/sound/qcom,wcd934x.yaml          | 169 ++++++++++++++++++
>>   1 file changed, 169 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
>> new file mode 100644
>> index 000000000000..299d6b96c339
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
>> @@ -0,0 +1,169 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
>> +
>> +maintainers:
>> +  - Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> +
>> +description: |
>> +  Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
>> +  It has in-built Soundwire controller, pin controller, interrupt mux and
>> +  supports both I2S/I2C and SLIMbus audio interfaces.
>> +
>> +properties:
>> +  compatible:
>> +    const: slim217,250
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  reset-gpios:
>> +    description: GPIO spec for reset line to use
>> +    maxItems: 1
>> +
>> +  slim-ifc-dev:
>> +    description: SLIMBus Interface device phandle
> 
> phandle or...
> 
Its Phandle.

something like this is okay?

slim-ifc-dev:
   $ref: '/schemas/types.yaml#/definitions/phandle-array'
   description: SLIMBus Interface device phandle



>> +    maxItems: 1
> 
> array?
> 
> Needs a type if a phandle.
> 
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    const: extclk
>> +
>> +  vdd-buck-supply:
>> +    description: A reference to the 1.8V buck supply
>> +
>> +  vdd-buck-sido-supply:
>> +    description: A reference to the 1.8V SIDO buck supply
>> +
>> +  vdd-rx-supply:
>> +    description: A reference to the 1.8V rx supply
>> +
>> +  vdd-tx-supply:
>> +    description: A reference to the 1.8V tx supply
>> +
>> +  vdd-vbat-supply:
>> +    description: A reference to the vbat supply
>> +
>> +  vdd-io-supply:
>> +    description: A reference to the 1.8V I/O supply
>> +
>> +  vdd-micbias-supply:
>> +    description: A reference to the micbias supply
>> +
>> +  qcom,micbias1-millivolt:
> 
> The standard unit is '-microvolt'
> 
>> +    description: Voltage betwee 1800mv-2850mv for micbias1 output
> 
> typo...
> 
Yep, will fix this and also move to standard unit microvolt

> Sounds like constraints.
> 
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
> 
> With standard units, you can drop the type.
> 
>> +
>> +  qcom,micbias2-millivolt:
>> +    description: Voltage betwee 1800mv-2850mv for micbias2 output
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>> +
>> +  qcom,micbias3-millivolt:
>> +    description: Voltage betwee 1800mv-2850mv for micbias3 output
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>> +
>> +  qcom,micbias4-millivolt:
>> +    description: Voltage betwee 1800mv-2850mv for micbias4 output
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>> +
>> +  clock-output-names:
>> +    const: mclk
>> +
>> +  clock-frequency:
>> +    description: Clock frequency of output clk in Hz
>> +
>> +  interrupt-controller: true
>> +
>> +  '#interrupt-cells':
>> +    const: 1
>> +
>> +  '#clock-cells':
>> +    const: 0
>> +
>> +  '#sound-dai-cells':
>> +    const: 1
>> +
>> +  "#address-cells":
>> +    const: 1
>> +
>> +  "#size-cells":
>> +    const: 1
>> +
>> +patternProperties:
>> +  "^.*@[0-9a-f]+$":
>> +    type: object
>> +    description: |
>> +      WCD934x subnode for each slave devices. Bindings of each subnodes
>> +      depends on the specific driver providing the functionality and
>> +      documented in there respective bindings.
> 
> s/there/their/

will fix this in next version!

thanks,
srini