[alsa-devel] [PATCH v2 00/12] Add Samus Hotwording for RT5677
Curtis Malainey
cujomalainey at chromium.org
Fri Oct 18 22:04:37 CEST 2019
This patch series adds the hotwording implementation used in the
Pixelbook on the RT5677 driver.
Known Issues:
There is a known issue where the system will fail to detect a hotword if
suspended while the stream is open. This is due to the fact that the
haswell-dsp suspends its I2S MCLK before the RT5677 suspends which
causes the writes and reads to become corrupted as a result. Any
recommendations to correct this behaviour would be appreciated.
Changes since v1:
* Addressed Mark's and Kuninori's comments
* Adjusted DAI Links
* Squashed related patches
* Removed all kcontrol writes
* Addressed race condition with dapm
* Added firmware boot check
* Moved all clocking to driver API
* Moved DAPM routes that spanned drivers to machine driver
Cc: Dylan Reid <dgreid at chromium.org>
Cc: Ben Zhang <benzh at chromium.org>
Ben Zhang (8):
ASoC: rt5677: Add a PCM device for streaming hotword via SPI
ASoC: rt5677: Load firmware via SPI using delayed work
ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM device
ASoC: rt5677: Enable jack detect while DSP is running
ASoC: rt5677: Add DAPM audio path for hotword stream
ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile
ASoC: rt5677: Stop and restart DSP over suspend/resume
ASoC: rt5677: Disable irq at suspend
Curtis Malainey (4):
ASoC: rt5677: Allow VAD to be shut on/off at all times
ASoC: bdw-rt5677: Turn on MCLK1 for DSP via DAPM
ASoC: rt5677: Set ADC clock to use PLL and enable ASRC
ASoC: rt5677: Wait for DSP to boot before loading firmware
sound/soc/codecs/rt5677-spi.c | 397 ++++++++++++++++++++++++
sound/soc/codecs/rt5677-spi.h | 1 +
sound/soc/codecs/rt5677.c | 447 +++++++++++++++++++++++-----
sound/soc/codecs/rt5677.h | 11 +-
sound/soc/intel/boards/bdw-rt5677.c | 51 ++++
5 files changed, 834 insertions(+), 73 deletions(-)
--
2.23.0.866.gb869b98d4c-goog
More information about the Alsa-devel
mailing list