[alsa-devel] [PATCH 17/36] ARM: s3c: h1940-audio: turn into platform driver

[Arnd Bergmann]

Avoid machine specific headers by using a gpio lookup table
combined with a platform_driver for this board.

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
 arch/arm/mach-s3c24xx/mach-h1940.c | 18 ++++++++
 sound/soc/samsung/h1940_uda1380.c  | 71 ++++++++++--------------------
 2 files changed, 41 insertions(+), 48 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 74d6b68e91c7..922d53bacbdf 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -475,6 +475,22 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
 	},
 };
 
+static struct gpiod_lookup_table h1940_audio_gpio_table = {
+	.dev_id = "h1940-audio",
+	.table = {
+		GPIO_LOOKUP("H1940_LATCH",
+			    H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
+			    "speaker-power", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device h1940_audio = {
+	.name = "h1940-audio",
+	.id   = -1,
+};
+
 static struct pwm_lookup h1940_pwm_lookup[] = {
 	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
 		   PWM_POLARITY_NORMAL),
@@ -652,6 +668,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_ts,
 	&power_supply,
 	&h1940_battery,
+	&h1940_audio,
 };
 
 static void __init h1940_map_io(void)
@@ -691,6 +708,7 @@ static void __init h1940_init(void)
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
 	gpiod_add_lookup_table(&h1940_mmc_gpio_table);
+	gpiod_add_lookup_table(&h1940_audio_gpio_table);
 	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index a95c34e53a2b..5fc001b4effd 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -15,9 +15,6 @@
 #include <sound/jack.h>
 
 #include "regs-iis.h"
-#include <asm/mach-types.h>
-
-#include <mach/gpio-samsung.h>
 #include "s3c24xx-i2s.h"
 
 static const unsigned int rates[] = {
@@ -31,6 +28,8 @@ static const struct snd_pcm_hw_constraint_list hw_rates = {
 	.list = rates,
 };
 
+static struct gpio_desc *gpiod_speaker_power;
+
 static struct snd_soc_jack hp_jack;
 
 static struct snd_soc_jack_pin hp_jack_pins[] = {
@@ -47,7 +46,6 @@ static struct snd_soc_jack_pin hp_jack_pins[] = {
 
 static struct snd_soc_jack_gpio hp_jack_gpios[] = {
 	{
-		.gpio			= S3C2410_GPG(4),
 		.name			= "hp-gpio",
 		.report			= SND_JACK_HEADPHONE,
 		.invert			= 1,
@@ -123,9 +121,9 @@ static int h1940_spk_power(struct snd_soc_dapm_widget *w,
 				struct snd_kcontrol *kcontrol, int event)
 {
 	if (SND_SOC_DAPM_EVENT_ON(event))
-		gpio_set_value(S3C_GPIO_END + 9, 1);
+		gpiod_set_value(gpiod_speaker_power, 1);
 	else
-		gpio_set_value(S3C_GPIO_END + 9, 0);
+		gpiod_set_value(gpiod_speaker_power, 0);
 
 	return 0;
 }
@@ -151,8 +149,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"VINM", NULL, "Mic Jack"},
 };
 
-static struct platform_device *s3c24xx_snd_device;
-
 static int h1940_uda1380_init(struct snd_soc_pcm_runtime *rtd)
 {
 	snd_soc_card_jack_new(rtd->card, "Headphone Jack", SND_JACK_HEADPHONE,
@@ -194,55 +190,34 @@ static struct snd_soc_card h1940_asoc = {
 	.num_dapm_routes = ARRAY_SIZE(audio_map),
 };
 
-static int __init h1940_init(void)
+static int h1940_probe(struct platform_device *pdev)
 {
-	int ret;
+	struct device *dev = &pdev->dev;
 
-	if (!machine_is_h1940())
-		return -ENODEV;
+	h1940_asoc.dev = dev;
+	hp_jack_gpios[0].gpiod_dev = dev;
+	gpiod_speaker_power = devm_gpiod_get(&pdev->dev, "speaker-power",
+					     GPIOD_OUT_LOW);
 
-	/* configure some gpios */
-	ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
-	if (ret)
-		goto err_out;
-
-	ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
-	if (ret)
-		goto err_gpio;
-
-	s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!s3c24xx_snd_device) {
-		ret = -ENOMEM;
-		goto err_gpio;
+	if (IS_ERR(gpiod_speaker_power)) {
+		dev_err(dev, "Could not get gpio\n");
+		return PTR_ERR(gpiod_speaker_power);
 	}
 
-	platform_set_drvdata(s3c24xx_snd_device, &h1940_asoc);
-	ret = platform_device_add(s3c24xx_snd_device);
-
-	if (ret)
-		goto err_plat;
-
-	return 0;
-
-err_plat:
-	platform_device_put(s3c24xx_snd_device);
-err_gpio:
-	gpio_free(S3C_GPIO_END + 9);
-
-err_out:
-	return ret;
-}
-
-static void __exit h1940_exit(void)
-{
-	platform_device_unregister(s3c24xx_snd_device);
-	gpio_free(S3C_GPIO_END + 9);
+	return devm_snd_soc_register_card(dev, &h1940_asoc);
 }
 
-module_init(h1940_init);
-module_exit(h1940_exit);
+static struct platform_driver h1940_audio_driver = {
+	.driver = {
+		.name = "h1940-audio",
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = h1940_probe,
+};
+module_platform_driver(h1940_audio_driver);
 
 /* Module information */
 MODULE_AUTHOR("Arnaud Patard, Vasily Khoruzhick");
 MODULE_DESCRIPTION("ALSA SoC H1940");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:h1940-audio");
-- 
2.20.0