[alsa-devel] [PATCH v5 2/2] watchdog: mtk_wdt: mt8183: Add reset controller

Yong Liang yong.liang at mediatek.com
Fri Nov 29 09:36:28 CET 2019


On Mon, 2019-11-25 at 17:51 +0800, Philipp Zabel wrote:
> Hi,
> 
> On Sun, 2019-11-24 at 22:16 -0800, Guenter Roeck wrote:
> > On Mon, Nov 25, 2019 at 11:03:50AM +0800, Jiaxin Yu wrote:
> > > From: "yong.liang" <yong.liang at mediatek.com>
> > > 
> > > Add reset controller API in watchdog driver.
> > > Besides watchdog, MTK toprgu module also provide sub-system (eg, audio,
> > > camera, codec and connectivity) software reset functionality.
> > > 
> > > Signed-off-by: yong.liang <yong.liang at mediatek.com>
> > > Signed-off-by: jiaxin.yu <jiaxin.yu at mediatek.com>
> > > Reviewed-by: Yingjoe Chen <yingjoe.chen at mediatek.com>
> > > ---
> > >  drivers/watchdog/Kconfig   |   1 +
> > >  drivers/watchdog/mtk_wdt.c | 111 ++++++++++++++++++++++++++++++++++++-
> > >  2 files changed, 111 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > > index 2e07caab9db2..629249fe5305 100644
> > > --- a/drivers/watchdog/Kconfig
> > > +++ b/drivers/watchdog/Kconfig
> > > @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG
> > >  	tristate "Mediatek SoCs watchdog support"
> > >  	depends on ARCH_MEDIATEK || COMPILE_TEST
> > >  	select WATCHDOG_CORE
> > > +	select RESET_CONTROLLER
> > >  	help
> > >  	  Say Y here to include support for the watchdog timer
> > >  	  in Mediatek SoCs.
> > > diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> > > index 9c3d0033260d..d29484c7940a 100644
> > > --- a/drivers/watchdog/mtk_wdt.c
> > > +++ b/drivers/watchdog/mtk_wdt.c
> > > @@ -9,6 +9,9 @@
> > >   * Based on sunxi_wdt.c
> > >   */
> > >  
> > > +#include <dt-bindings/reset-controller/mt2712-resets.h>
> > > +#include <dt-bindings/reset-controller/mt8183-resets.h>
> > > +#include <linux/delay.h>
> > >  #include <linux/err.h>
> > >  #include <linux/init.h>
> > >  #include <linux/io.h>
> > > @@ -16,10 +19,12 @@
> > >  #include <linux/module.h>
> > >  #include <linux/moduleparam.h>
> > >  #include <linux/of.h>
> > > +#include <linux/of_device.h>
> > >  #include <linux/platform_device.h>
> > > +#include <linux/reset-controller.h>
> > > +#include <linux/slab.h>
> > >  #include <linux/types.h>
> > >  #include <linux/watchdog.h>
> > > -#include <linux/delay.h>
> > >  
> > >  #define WDT_MAX_TIMEOUT		31
> > >  #define WDT_MIN_TIMEOUT		1
> > > @@ -44,6 +49,9 @@
> > >  #define WDT_SWRST		0x14
> > >  #define WDT_SWRST_KEY		0x1209
> > >  
> > > +#define WDT_SWSYSRST		0x18U
> > > +#define WDT_SWSYS_RST_KEY	0x88000000
> > > +
> > >  #define DRV_NAME		"mtk-wdt"
> > >  #define DRV_VERSION		"1.0"
> > >  
> > > @@ -53,8 +61,99 @@ static unsigned int timeout;
> > >  struct mtk_wdt_dev {
> > >  	struct watchdog_device wdt_dev;
> > >  	void __iomem *wdt_base;
> > > +	spinlock_t lock; /* protects WDT_SWSYSRST reg */
> > > +	struct reset_controller_dev rcdev;
> > > +};
> > > +
> > > +struct mtk_wdt_data {
> > > +	int sw_rst_num;
> > >  };
> > >  
> > > +static const struct mtk_wdt_data mt2712_data = {
> > > +	.sw_rst_num = MT2712_TOPRGU_SW_RST_NUM,
> > > +};
> > > +
> > > +static const struct mtk_wdt_data mt8183_data = {
> > > +	.sw_rst_num = MT8183_TOPRGU_SW_RST_NUM,
> > > +};
> > 
> > The number of resets can be set in .data directly; there is no need
> > for the structures.

    We want to put all properities in mtxxxx-resets.h and it easy to
manager. If there are new properity in the feture, we can put it in
mtk_wdt_data mtxxxx_data
> > 
> > > +
> > > +static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
> > > +			       unsigned long id)
> > > +{
> > > +	unsigned int tmp;
> > > +	unsigned long flags;
> > > +	struct mtk_wdt_dev *data =
> > > +		 container_of(rcdev, struct mtk_wdt_dev, rcdev);
> > > +
> > > +	spin_lock_irqsave(&data->lock, flags);
> > > +
> > > +	tmp = __raw_readl(data->wdt_base + WDT_SWSYSRST);
> 
> I think this should be readl_relaxed() instead. I don't expect this
> driver will ever be used on a big-endian architecture, but mixing
> __raw_readl() and writel() does look dangerous.

  OK, I will change __raw_readl() to readl()
> 
> > > +	tmp |= BIT(id);
> > > +	tmp |= WDT_SWSYS_RST_KEY;
> > > +	writel(tmp, data->wdt_base + WDT_SWSYSRST);
> > > +
> > > +	spin_unlock_irqrestore(&data->lock, flags);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
> > > +				 unsigned long id)
> > > +{
> > > +	unsigned int tmp;
> > > +	unsigned long flags;
> > > +	struct mtk_wdt_dev *data =
> > > +		 container_of(rcdev, struct mtk_wdt_dev, rcdev);
> > > +
> > > +	spin_lock_irqsave(&data->lock, flags);
> > > +
> > > +	tmp = __raw_readl(data->wdt_base + WDT_SWSYSRST);
> > > +	tmp &= ~BIT(id);
> > > +	tmp |= WDT_SWSYS_RST_KEY;
> > > +	writel(tmp, data->wdt_base + WDT_SWSYSRST);
> > > +
> > > +	spin_unlock_irqrestore(&data->lock, flags);
> > > +
> > > +	return 0;
> > > +}
> > 
> > There is a lot of duplication in those functions. Only one line
> > is different. I think this is a good example where a helper function
> > with an additional argument indicating set or reset would be helpful.
> > 
    .assert and .dessert are two numbers of struct reset_control_ops.
     I think it's better to define both of them.
> > > +
> > > +static int toprgu_reset(struct reset_controller_dev *rcdev,
> > > +			unsigned long id)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = toprgu_reset_assert(rcdev, id);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	return toprgu_reset_deassert(rcdev, id);
> > > +}
> > > +
> > > +static const struct reset_control_ops toprgu_reset_ops = {
> > > +	.assert = toprgu_reset_assert,
> > > +	.deassert = toprgu_reset_deassert,
> > > +	.reset = toprgu_reset,
> > > +};
> > > +
> > > +static int toprgu_register_reset_controller(struct platform_device *pdev,
> > > +					    int rst_num)
> > > +{
> > > +	int ret;
> > > +	struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
> > > +
> > > +	spin_lock_init(&mtk_wdt->lock);
> > > +
> > > +	mtk_wdt->rcdev.owner = THIS_MODULE;
> > > +	mtk_wdt->rcdev.nr_resets = rst_num;
> > > +	mtk_wdt->rcdev.ops = &toprgu_reset_ops;
> > > +	mtk_wdt->rcdev.of_node = pdev->dev.of_node;
> > > +	ret = reset_controller_register(&mtk_wdt->rcdev);
> 
> I see this driver uses devm_kzalloc() below. Should this be
> devm_reset_controller_register()?
> 
> > > +	if (ret != 0)
> > > +		dev_err(&pdev->dev,
> > > +			"couldn't register wdt reset controller: %d\n", ret);
> > > +	return ret;
> > > +}
> > > +
> > >  static int mtk_wdt_restart(struct watchdog_device *wdt_dev,
> > >  			   unsigned long action, void *data)
> > >  {
> > > @@ -155,6 +254,7 @@ static int mtk_wdt_probe(struct platform_device *pdev)
> > >  {
> > >  	struct device *dev = &pdev->dev;
> > >  	struct mtk_wdt_dev *mtk_wdt;
> > > +	struct mtk_wdt_data *wdt_data;
> > >  	int err;
> > >  
> > >  	mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
> 
> regards
> Philipp
> 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek



More information about the Alsa-devel mailing list