[alsa-devel] [PATCHv2 5/6] ASoC: da7213: Move set_pll to codec level
Adam Thomson
Adam.Thomson.Opensource at diasemi.com
Tue Nov 26 18:10:30 CET 2019
On 20 November 2019 15:24, Sebastian Reichel wrote:
> Move set_pll function to component level, so that it can be used at
> both component and DAI level.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource at diasemi.com>
> ---
> sound/soc/codecs/da7213.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
> index 9686948b16ea..3e6ad996741b 100644
> --- a/sound/soc/codecs/da7213.c
> +++ b/sound/soc/codecs/da7213.c
> @@ -1392,10 +1392,10 @@ static int da7213_set_component_sysclk(struct
> snd_soc_component *component,
> }
>
> /* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */
> -static int da7213_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
> - int source, unsigned int fref, unsigned int fout)
> +static int da7213_set_component_pll(struct snd_soc_component *component,
> + int pll_id, int source,
> + unsigned int fref, unsigned int fout)
> {
> - struct snd_soc_component *component = codec_dai->component;
> struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
>
> u8 pll_ctrl, indiv_bits, indiv;
> @@ -1507,7 +1507,6 @@ static int da7213_set_dai_pll(struct snd_soc_dai
> *codec_dai, int pll_id,
> static const struct snd_soc_dai_ops da7213_dai_ops = {
> .hw_params = da7213_hw_params,
> .set_fmt = da7213_set_dai_fmt,
> - .set_pll = da7213_set_dai_pll,
> .digital_mute = da7213_mute,
> };
>
> @@ -1845,6 +1844,7 @@ static const struct snd_soc_component_driver
> soc_component_dev_da7213 = {
> .dapm_routes = da7213_audio_map,
> .num_dapm_routes = ARRAY_SIZE(da7213_audio_map),
> .set_sysclk = da7213_set_component_sysclk,
> + .set_pll = da7213_set_component_pll,
> .idle_bias_on = 1,
> .use_pmdown_time = 1,
> .endianness = 1,
> --
> 2.24.0
More information about the Alsa-devel
mailing list