[alsa-devel] [PATCHv2 6/6] ASoC: da7213: Add default clock handling
Adam Thomson
Adam.Thomson.Opensource at diasemi.com
Thu Nov 21 22:49:12 CET 2019
On 20 November 2019 15:24, Sebastian Reichel wrote:
> This adds default clock/PLL configuration to the driver
> for usage with generic drivers like simple-card for usage
> with a fixed rate clock.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
> ---
> sound/soc/codecs/da7213.c | 75
> ++++++++++++++++++++++++++++++++++++---
> sound/soc/codecs/da7213.h | 2 ++
> 2 files changed, 73 insertions(+), 4 deletions(-)
>
> diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
> index 3e6ad996741b..ff1a936240be 100644
> --- a/sound/soc/codecs/da7213.c
> +++ b/sound/soc/codecs/da7213.c
> @@ -1156,6 +1156,7 @@ static int da7213_hw_params(struct
> snd_pcm_substream *substream,
> struct snd_soc_dai *dai)
> {
> struct snd_soc_component *component = dai->component;
> + struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> u8 dai_ctrl = 0;
> u8 fs;
>
> @@ -1181,33 +1182,43 @@ static int da7213_hw_params(struct
> snd_pcm_substream *substream,
> switch (params_rate(params)) {
> case 8000:
> fs = DA7213_SR_8000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 11025:
> fs = DA7213_SR_11025;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 12000:
> fs = DA7213_SR_12000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 16000:
> fs = DA7213_SR_16000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 22050:
> fs = DA7213_SR_22050;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 32000:
> fs = DA7213_SR_32000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 44100:
> fs = DA7213_SR_44100;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 48000:
> fs = DA7213_SR_48000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 88200:
> fs = DA7213_SR_88200;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 96000:
> fs = DA7213_SR_96000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> default:
> return -EINVAL;
> @@ -1392,9 +1403,9 @@ static int da7213_set_component_sysclk(struct
> snd_soc_component *component,
> }
>
> /* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */
> -static int da7213_set_component_pll(struct snd_soc_component *component,
> - int pll_id, int source,
> - unsigned int fref, unsigned int fout)
> +static int _da7213_set_component_pll(struct snd_soc_component
> *component,
> + int pll_id, int source,
> + unsigned int fref, unsigned int fout)
> {
> struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
>
> @@ -1503,6 +1514,16 @@ static int da7213_set_component_pll(struct
> snd_soc_component *component,
> return 0;
> }
>
> +static int da7213_set_component_pll(struct snd_soc_component *component,
> + int pll_id, int source,
> + unsigned int fref, unsigned int fout)
> +{
> + struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> + da7213->fixed_clk_auto_pll = false;
> +
> + return _da7213_set_component_pll(component, pll_id, source, fref,
> fout);
> +}
> +
> /* DAI operations */
> static const struct snd_soc_dai_ops da7213_dai_ops = {
> .hw_params = da7213_hw_params,
> @@ -1532,6 +1553,43 @@ static struct snd_soc_dai_driver da7213_dai = {
> .symmetric_rates = 1,
> };
>
> +static int da7213_set_auto_pll(struct snd_soc_component *component, bool
> enable)
> +{
> + struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> + int mode;
> +
> + if (!da7213->fixed_clk_auto_pll)
> + return 0;
> +
> + da7213->mclk_rate = clk_get_rate(da7213->mclk);
> +
> + if (enable)
> + mode = DA7213_SYSCLK_PLL;
> + else
> + mode = DA7213_SYSCLK_MCLK;
If we're the clock slave, and we're using an MCLK that's not a harmonic then
SRM is required to synchronise the PLL to the incoming WCLK signal. I assume
simple sound card should allow for both master and slave modes? If so we'll
need to do something here to determine this as well.
> +
> + switch (da7213->out_rate) {
> + case DA7213_PLL_FREQ_OUT_90316800:
> + if (da7213->mclk_rate == 11289600 ||
> + da7213->mclk_rate == 22579200 ||
> + da7213->mclk_rate == 45158400)
> + mode = DA7213_SYSCLK_MCLK;
> + break;
> + case DA7213_PLL_FREQ_OUT_98304000:
> + if (da7213->mclk_rate == 12288000 ||
> + da7213->mclk_rate == 24576000 ||
> + da7213->mclk_rate == 49152000)
> + mode = DA7213_SYSCLK_MCLK;
> +
> + break;
> + default:
> + return -1;
> + }
> +
> + return _da7213_set_component_pll(component, 0, mode,
> + da7213->mclk_rate, da7213->out_rate);
> +}
> +
> static int da7213_set_bias_level(struct snd_soc_component *component,
> enum snd_soc_bias_level level)
> {
> @@ -1551,6 +1609,8 @@ static int da7213_set_bias_level(struct
> snd_soc_component *component,
> "Failed to enable mclk\n");
> return ret;
> }
> +
> + da7213_set_auto_pll(component, true);
I've thought more about this and for the scenario where a machine driver
controls the PLL through a DAPM widget associated with this codec (like some
Intel boards do), then the PLL will be configured once here and then again
when the relevant widget is called. I don't think that will matter but I will
take a further look just in case this might cause some oddities.
> }
> }
> break;
> @@ -1562,8 +1622,10 @@ static int da7213_set_bias_level(struct
> snd_soc_component *component,
> DA7213_VMID_EN | DA7213_BIAS_EN);
> } else {
> /* Remove MCLK */
> - if (da7213->mclk)
> + if (da7213->mclk) {
> + da7213_set_auto_pll(component, false);
> clk_disable_unprepare(da7213->mclk);
> + }
> }
> break;
> case SND_SOC_BIAS_OFF:
> @@ -1829,6 +1891,11 @@ static int da7213_probe(struct snd_soc_component
> *component)
> return PTR_ERR(da7213->mclk);
> else
> da7213->mclk = NULL;
> + } else {
> + /* Do automatic PLL handling assuming fixed clock until
> + * set_pll() has been called. This makes the codec usable
> + * with the simple-audio-card driver. */
> + da7213->fixed_clk_auto_pll = true;
> }
>
> return 0;
> diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
> index 3890829dfb6e..97ccf0ddd2be 100644
> --- a/sound/soc/codecs/da7213.h
> +++ b/sound/soc/codecs/da7213.h
> @@ -535,10 +535,12 @@ struct da7213_priv {
> struct regulator_bulk_data supplies[DA7213_NUM_SUPPLIES];
> struct clk *mclk;
> unsigned int mclk_rate;
> + unsigned int out_rate;
> int clk_src;
> bool master;
> bool alc_calib_auto;
> bool alc_en;
> + bool fixed_clk_auto_pll;
> struct da7213_platform_data *pdata;
> };
>
> --
> 2.24.0
More information about the Alsa-devel
mailing list