[alsa-devel] [PATCH V2 1/2] ASoC: dt-bindings: fsl_asrc: add compatible string for imx8qm

S.j. Wang shengjiu.wang at nxp.com
Mon Nov 11 10:06:07 CET 2019


Hi Rob, Nicolin

> 
> Hi Rob
> >
> > On Wed, Oct 30, 2019 at 07:41:26PM +0800, Shengjiu Wang wrote:
> > > In order to support the two asrc modules in imx8qm, we need to add
> > > compatible string "fsl,imx8qm-asrc0" and "fsl,imx8qm-asrc1"
> >
> > Are the blocks different in some way?
> >
> > If not, why do you need to distinguish them?
> >
> The internal clock mapping is different for each module.
> 
> Or we can use one compatible string, but need add another property
> "fsl,asrc-clk-map" to distinguish the different clock map.
> 
> The change is in below.
> 
> Which one do you think is better?
> 
> Required properties:
> 
> -  - compatible         : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
> +  - compatible         : Contains "fsl,imx35-asrc", "fsl,imx53-asrc",
> +                         "fsl,imx8qm-asrc".
> 
>    - reg                        : Offset and length of the register set for the device.
> 
> @@ -35,6 +36,11 @@ Required properties:
> 
>     - fsl,asrc-width    : Defines a mutual sample width used by DPCM Back
> Ends.
> 
> +   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
> +                         by imx8qm
> +                         <0> - select the map for asrc0
> +                         <1> - select the map for asrc1
> +
>  Optional properties:
> 

I will do a update for this change in v3.

Best regards
Wang shengjiu



More information about the Alsa-devel mailing list