[alsa-devel] [PATCH v3 3/6] ASoC: amd: Enabling I2S instance in DMA and DAI
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Thu Nov 7 16:22:25 CET 2019
> if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> - val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_ITER);
> - val = val | (rtd->xfer_resolution << 3);
> - rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_ITER);
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_ITER);
> + val = val | (rtd->xfer_resolution << 3);
> + rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_ITER);
> + break;
> + case I2S_SP_INSTANCE:
> + default:
> + val = rv_readl(rtd->acp3x_base + mmACP_I2STDM_ITER);
> + val = val | (rtd->xfer_resolution << 3);
> + rv_writel(val, rtd->acp3x_base + mmACP_I2STDM_ITER);
> + }
> } else {
> - val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_IRER);
> - val = val | (rtd->xfer_resolution << 3);
> - rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_IRER);
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_IRER);
> + val = val | (rtd->xfer_resolution << 3);
> + rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_IRER);
> + break;
> + case I2S_SP_INSTANCE:
> + default:
> + val = rv_readl(rtd->acp3x_base + mmACP_I2STDM_IRER);
> + val = val | (rtd->xfer_resolution << 3);
> + rv_writel(val, rtd->acp3x_base + mmACP_I2STDM_IRER);
> + }
You could reduce the code by setting the address in the switch case,
then perform the read/modify/write outisde of the switch.
> @@ -131,33 +168,104 @@ static int acp3x_i2s_trigger(struct snd_pcm_substream *substream,
> rtd->bytescount = acp_get_byte_count(rtd,
> substream->stream);
> if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> - rv_writel(period_bytes, rtd->acp3x_base +
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + rv_writel(period_bytes, rtd->acp3x_base +
> mmACP_BT_TX_INTR_WATERMARK_SIZE);
> - val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_ITER);
> - val = val | BIT(0);
> - rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_ITER);
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_BTTDM_ITER);
> + val = val | BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_BTTDM_ITER);
> + rv_writel(1, rtd->acp3x_base +
> + mmACP_BTTDM_IER);
> + break;
> + case I2S_SP_INSTANCE:
> + default:
> + rv_writel(period_bytes, rtd->acp3x_base +
> + mmACP_I2S_TX_INTR_WATERMARK_SIZE);
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_I2STDM_ITER);
> + val = val | BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_I2STDM_ITER);
> + rv_writel(1, rtd->acp3x_base +
> + mmACP_I2STDM_IER);
> + }
> } else {
> - rv_writel(period_bytes, rtd->acp3x_base +
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + rv_writel(period_bytes, rtd->acp3x_base +
> mmACP_BT_RX_INTR_WATERMARK_SIZE);
> - val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_IRER);
> - val = val | BIT(0);
> - rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_IRER);
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_BTTDM_IRER);
> + val = val | BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_BTTDM_IRER);
> + rv_writel(1, rtd->acp3x_base +
> + mmACP_BTTDM_IER);
> + break;
> + case I2S_SP_INSTANCE:
> + default:
> + rv_writel(period_bytes, rtd->acp3x_base +
> + mmACP_I2S_RX_INTR_WATERMARK_SIZE);
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_I2STDM_IRER);
> + val = val | BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_I2STDM_IRER);
> + rv_writel(1, rtd->acp3x_base +
> + mmACP_I2STDM_IER);
> + }
same here, you could set 3 addresses in the switch cases, and perform
the operations outside of the switch.
> }
> - rv_writel(1, rtd->acp3x_base + mmACP_BTTDM_IER);
> break;
> case SNDRV_PCM_TRIGGER_STOP:
> case SNDRV_PCM_TRIGGER_SUSPEND:
> case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> - val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_ITER);
> - val = val & ~BIT(0);
> - rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_ITER);
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_BTTDM_ITER);
> + val = val & ~BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_BTTDM_ITER);
> + rv_writel(0, rtd->acp3x_base +
> + mmACP_BTTDM_IER);
> + break;
> + case I2S_SP_INSTANCE:
> + default:
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_I2STDM_ITER);
> + val = val & ~BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_I2STDM_ITER);
> + rv_writel(0, rtd->acp3x_base +
> + mmACP_I2STDM_IER);
> + }
> +
> } else {
> - val = rv_readl(rtd->acp3x_base + mmACP_BTTDM_IRER);
> - val = val & ~BIT(0);
> - rv_writel(val, rtd->acp3x_base + mmACP_BTTDM_IRER);
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_BTTDM_IRER);
> + val = val & ~BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_BTTDM_IRER);
> + rv_writel(0, rtd->acp3x_base +
> + mmACP_BTTDM_IER);
> + break;
> + case I2S_SP_INSTANCE:
> + default:
> + val = rv_readl(rtd->acp3x_base +
> + mmACP_I2STDM_IRER);
> + val = val & ~BIT(0);
> + rv_writel(val, rtd->acp3x_base +
> + mmACP_I2STDM_IRER);
> + rv_writel(0, rtd->acp3x_base +
> + mmACP_I2STDM_IER);
> + }
and here too...
> if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
> - /* Config ringbuffer */
> - rv_writel(MEM_WINDOW_START, rtd->acp3x_base +
> - mmACP_BT_TX_RINGBUFADDR);
> - rv_writel(MAX_BUFFER, rtd->acp3x_base +
> - mmACP_BT_TX_RINGBUFSIZE);
> - rv_writel(DMA_SIZE, rtd->acp3x_base + mmACP_BT_TX_DMA_SIZE);
> -
> - /* Config audio fifo */
> - acp_fifo_addr = ACP_SRAM_PTE_OFFSET + (rtd->num_pages * 8)
> - + PLAYBACK_FIFO_ADDR_OFFSET;
> - rv_writel(acp_fifo_addr, rtd->acp3x_base +
> - mmACP_BT_TX_FIFOADDR);
> - rv_writel(FIFO_SIZE, rtd->acp3x_base + mmACP_BT_TX_FIFOSIZE);
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + /* Config ringbuffer */
> + rv_writel(I2S_BT_TX_MEM_WINDOW_START,
> + rtd->acp3x_base + mmACP_BT_TX_RINGBUFADDR);
> + rv_writel(MAX_BUFFER, rtd->acp3x_base +
> + mmACP_BT_TX_RINGBUFSIZE);
> + rv_writel(DMA_SIZE,
> + rtd->acp3x_base + mmACP_BT_TX_DMA_SIZE);
> +
> + /* Config audio fifo */
> + acp_fifo_addr = ACP_SRAM_PTE_OFFSET +
> + BT_PB_FIFO_ADDR_OFFSET;
> + rv_writel(acp_fifo_addr,
> + rtd->acp3x_base + mmACP_BT_TX_FIFOADDR);
> + rv_writel(FIFO_SIZE,
> + rtd->acp3x_base + mmACP_BT_TX_FIFOSIZE);
> + /* Enable watermark/period interrupt to host */
> + rv_writel(BIT(BT_TX_THRESHOLD),
> + rtd->acp3x_base + mmACP_EXTERNAL_INTR_CNTL);
> + break;
> +
> + case I2S_SP_INSTANCE:
> + default:
> + /* Config ringbuffer */
> + rv_writel(I2S_SP_TX_MEM_WINDOW_START,
> + rtd->acp3x_base + mmACP_I2S_TX_RINGBUFADDR);
> + rv_writel(MAX_BUFFER,
> + rtd->acp3x_base + mmACP_I2S_TX_RINGBUFSIZE);
> + rv_writel(DMA_SIZE,
> + rtd->acp3x_base + mmACP_I2S_TX_DMA_SIZE);
> +
> + /* Config audio fifo */
> + acp_fifo_addr = ACP_SRAM_PTE_OFFSET +
> + SP_PB_FIFO_ADDR_OFFSET;
> + rv_writel(acp_fifo_addr,
> + rtd->acp3x_base + mmACP_I2S_TX_FIFOADDR);
> + rv_writel(FIFO_SIZE,
> + rtd->acp3x_base + mmACP_I2S_TX_FIFOSIZE);
> + /* Enable watermark/period interrupt to host */
> + rv_writel(BIT(I2S_TX_THRESHOLD),
> + rtd->acp3x_base + mmACP_EXTERNAL_INTR_CNTL);
> + }
> } else {
> - /* Config ringbuffer */
> - rv_writel(MEM_WINDOW_START + MAX_BUFFER, rtd->acp3x_base +
> - mmACP_BT_RX_RINGBUFADDR);
> - rv_writel(MAX_BUFFER, rtd->acp3x_base +
> - mmACP_BT_RX_RINGBUFSIZE);
> - rv_writel(DMA_SIZE, rtd->acp3x_base + mmACP_BT_RX_DMA_SIZE);
> -
> - /* Config audio fifo */
> - acp_fifo_addr = ACP_SRAM_PTE_OFFSET +
> - (rtd->num_pages * 8) + CAPTURE_FIFO_ADDR_OFFSET;
> - rv_writel(acp_fifo_addr, rtd->acp3x_base +
> - mmACP_BT_RX_FIFOADDR);
> - rv_writel(FIFO_SIZE, rtd->acp3x_base + mmACP_BT_RX_FIFOSIZE);
> + switch (rtd->i2s_instance) {
> + case I2S_BT_INSTANCE:
> + /* Config ringbuffer */
> + rv_writel(I2S_BT_RX_MEM_WINDOW_START,
> + rtd->acp3x_base + mmACP_BT_RX_RINGBUFADDR);
> + rv_writel(MAX_BUFFER,
> + rtd->acp3x_base + mmACP_BT_RX_RINGBUFSIZE);
> + rv_writel(DMA_SIZE,
> + rtd->acp3x_base + mmACP_BT_RX_DMA_SIZE);
> +
> + /* Config audio fifo */
> + acp_fifo_addr = ACP_SRAM_PTE_OFFSET +
> + BT_CAPT_FIFO_ADDR_OFFSET;
> + rv_writel(acp_fifo_addr,
> + rtd->acp3x_base + mmACP_BT_RX_FIFOADDR);
> + rv_writel(FIFO_SIZE,
> + rtd->acp3x_base + mmACP_BT_RX_FIFOSIZE);
> + /* Enable watermark/period interrupt to host */
> + rv_writel(BIT(BT_RX_THRESHOLD),
> + rtd->acp3x_base + mmACP_EXTERNAL_INTR_CNTL);
> + break;
> +
> + case I2S_SP_INSTANCE:
> + default:
> + /* Config ringbuffer */
> + rv_writel(I2S_SP_RX_MEM_WINDOW_START,
> + rtd->acp3x_base + mmACP_I2S_RX_RINGBUFADDR);
> + rv_writel(MAX_BUFFER,
> + rtd->acp3x_base + mmACP_I2S_RX_RINGBUFSIZE);
> + rv_writel(DMA_SIZE,
> + rtd->acp3x_base + mmACP_I2S_RX_DMA_SIZE);
> +
> + /* Config audio fifo */
> + acp_fifo_addr = ACP_SRAM_PTE_OFFSET +
> + SP_CAPT_FIFO_ADDR_OFFSET;
> + rv_writel(acp_fifo_addr,
> + rtd->acp3x_base + mmACP_I2S_RX_FIFOADDR);
> + rv_writel(FIFO_SIZE,
> + rtd->acp3x_base + mmACP_I2S_RX_FIFOSIZE);
> + /* Enable watermark/period interrupt to host */
> + rv_writel(BIT(I2S_RX_THRESHOLD),
> + rtd->acp3x_base + mmACP_EXTERNAL_INTR_CNTL);
> + }
and here too. You are doing the same operations with just different offsets.
More information about the Alsa-devel
mailing list