[alsa-devel] [PATCH v3 05/11] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile

Curtis Malainey cujomalainey at chromium.org
Wed Nov 6 02:13:30 CET 2019


From: Ben Zhang <benzh at chromium.org>

The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1
while it's streaming audio over SPI. The DSP firmware turns
on PLL2 (MX-64 bit 8) when SPI streaming starts.  However regmap
does not believe that register can change by itself. When
BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't
read the register first before write, so PLL2 power bit is
cleared by accident.

Marking MX-64h as volatile in regmap solved the issue.

Signed-off-by: Ben Zhang <benzh at chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey at chromium.org>
---
 sound/soc/codecs/rt5677.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index ea235f3874ca..e5db9dc60378 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -302,6 +302,7 @@ static bool rt5677_volatile_register(struct device *dev, unsigned int reg)
 	case RT5677_I2C_MASTER_CTRL7:
 	case RT5677_I2C_MASTER_CTRL8:
 	case RT5677_HAP_GENE_CTRL2:
+	case RT5677_PWR_ANLG2: /* Modified by DSP firmware */
 	case RT5677_PWR_DSP_ST:
 	case RT5677_PRIV_DATA:
 	case RT5677_ASRC_22:
-- 
2.24.0.rc1.363.gb1bccd3e3d-goog



More information about the Alsa-devel mailing list