[alsa-devel] [PATCH v2] ACPI / device_sysfs: change _ADR representation to 64 bits

[Rafael J. Wysocki]

On Monday, May 6, 2019 10:36:22 AM CEST Rafael J. Wysocki wrote:
> On Thu, May 2, 2019 at 6:58 AM Vinod Koul <vkoul at kernel.org> wrote:
> >
> > On 01-05-19, 07:53, Pierre-Louis Bossart wrote:
> > > Standards such as the MIPI DisCo for SoundWire 1.0 specification
> > > assume the _ADR field is 64 bits.
> > >
> > > _ADR is defined as an "Integer" represented as 64 bits since ACPI 2.0
> > > released in 2002. The low levels already use _ADR as 64 bits, e.g. in
> > > struct acpi_device_info.
> > >
> > > This patch bumps the representation used for sysfs to 64 bits. To
> > > avoid any compatibility/ABI issues, the printf format is only extended
> > > to 16 characters when the actual _ADR value exceeds the 32 bit
> > > maximum.
> > >
> > > Example with a SoundWire device, the results show the complete
> > > vendorID and linkID which were omitted before:
> > >
> > > Before:
> > > $ more /sys/bus/acpi/devices/device\:38/adr
> > > 0x5d070000
> > > After:
> > > $ more /sys/bus/acpi/devices/device\:38/adr
> > > 0x000010025d070000
> > >
> > > Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> > > ---
> > > v2: only use 64 bits when required to avoid compatibility issues
> > > (feedback from Vinod and Rafael)
> > >
> > >  drivers/acpi/device_sysfs.c | 6 ++++--
> > >  include/acpi/acpi_bus.h     | 2 +-
> > >  2 files changed, 5 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/acpi/device_sysfs.c b/drivers/acpi/device_sysfs.c
> > > index 8940054d6250..7dda0ee05cd1 100644
> > > --- a/drivers/acpi/device_sysfs.c
> > > +++ b/drivers/acpi/device_sysfs.c
> > > @@ -428,8 +428,10 @@ static ssize_t acpi_device_adr_show(struct device *dev,
> > >  {
> > >       struct acpi_device *acpi_dev = to_acpi_device(dev);
> > >
> > > -     return sprintf(buf, "0x%08x\n",
> > > -                    (unsigned int)(acpi_dev->pnp.bus_address));
> > > +     if (acpi_dev->pnp.bus_address > 0xFFFFFFFF)
> >
> > Would prefer to use U32_MAX instead of 0xFFFFFFFF
> 
> I would.
> 

I have made that change manually and applied the patch.

Thanks!