[alsa-devel] [PATCH 1/2] ASoC: Add support for Conexant CX2072X CODEC

[Mark Brown]

On Mon, May 06, 2019 at 05:26:51PM +0200, Takashi Iwai wrote:
> Mark Brown wrote:

> > Like I say if the device is using the fact that the pin is a GPIO
> > there's quite likely something wrong - that shouldn't be something that
> > the user of an interrupt should need to see.

> Yeah, unfortunately we have no reference, so the only chance would be
> to test with another board that has a different setup.

The GPIO/IRQ equivalence thing should just be a purely Linux internal
thing - looking at the driver it appears that there's no need to look at
the GPIO status, Linux can tell if something is plugged in purely by
reading the chip registers so the jack status function could directly be
the interrupt handler.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20190508/20d31705/attachment.sig>