[alsa-devel] [PATCH v2 04/30] mfd: cros_ec: add ec_align macros
Gwendal Grignou
gwendal at chromium.org
Sat May 4 00:02:07 CEST 2019
To reduce code and improve performance of the embedded controller
firmware, pragma __aligned(2) or __aligned(4) are used when alignment to
16 or 32 bit boundary is expected.
Define all ec_align to packed when compiling kernel.
Acked-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
Signed-off-by: Gwendal Grignou <gwendal at chromium.org>
---
include/linux/mfd/cros_ec_commands.h | 438 +++++++++++++++------------
1 file changed, 236 insertions(+), 202 deletions(-)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 43fe1697b18b..e0f6e9d9f587 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -188,12 +188,46 @@
#ifndef __ACPI__
/*
- * Define __packed if someone hasn't beat us to it. Linux kernel style
- * checking prefers __packed over __attribute__((packed)).
+ * Attributes for EC request and response packets. Just defining __packed
+ * results in inefficient assembly code on ARM, if the structure is actually
+ * 32-bit aligned, as it should be for all buffers.
+ *
+ * Be very careful when adding these to existing structures. They will round
+ * up the structure size to the specified boundary.
+ *
+ * Also be very careful to make that if a structure is included in some other
+ * parent structure that the alignment will still be true given the packing of
+ * the parent structure. This is particularly important if the sub-structure
+ * will be passed as a pointer to another function, since that function will
+ * not know about the misaligment caused by the parent structure's packing.
+ *
+ * Also be very careful using __packed - particularly when nesting non-packed
+ * structures inside packed ones. In fact, DO NOT use __packed directly;
+ * always use one of these attributes.
+ *
+ * Once everything is annotated properly, the following search strings should
+ * not return ANY matches in this file other than right here:
+ *
+ * "__packed" - generates inefficient code; all sub-structs must also be packed
+ *
+ * "struct [^_]" - all structs should be annotated, except for structs that are
+ * members of other structs/unions (and their original declarations should be
+ * annotated).
*/
-#ifndef __packed
-#define __packed __attribute__((packed))
-#endif
+
+/*
+ * Packed structures make no assumption about alignment, so they do inefficient
+ * byte-wise reads.
+ */
+#define __ec_align1 __packed
+#define __ec_align2 __packed
+#define __ec_align4 __packed
+#define __ec_align_size1 __packed
+#define __ec_align_offset1 __packed
+#define __ec_align_offset2 __packed
+#define __ec_todo_packed __packed
+#define __ec_todo_unpacked
+
/* LPC command status byte masks */
/* EC has written a byte in the data register and host hasn't read it yet */
@@ -317,7 +351,7 @@ struct ec_lpc_host_args {
uint8_t command_version;
uint8_t data_size;
uint8_t checksum;
-} __packed;
+} __ec_align4;
/* Flags for ec_lpc_host_args.flags */
/*
@@ -488,7 +522,7 @@ struct ec_host_request {
uint8_t command_version;
uint8_t reserved;
uint16_t data_len;
-} __packed;
+} __ec_align4;
#define EC_HOST_RESPONSE_VERSION 3
@@ -507,7 +541,7 @@ struct ec_host_response {
uint16_t result;
uint16_t data_len;
uint16_t reserved;
-} __packed;
+} __ec_align4;
/*****************************************************************************/
/*
@@ -536,7 +570,7 @@ struct ec_host_response {
*/
struct ec_response_proto_version {
uint32_t version;
-} __packed;
+} __ec_align4;
/*
* Hello. This is a simple command to test the EC is responsive to
@@ -550,7 +584,7 @@ struct ec_response_proto_version {
*/
struct ec_params_hello {
uint32_t in_data;
-} __packed;
+} __ec_align4;
/**
* struct ec_response_hello - Response to the hello command.
@@ -558,7 +592,7 @@ struct ec_params_hello {
*/
struct ec_response_hello {
uint32_t out_data;
-} __packed;
+} __ec_align4;
/* Get version number */
#define EC_CMD_GET_VERSION 0x02
@@ -581,7 +615,7 @@ struct ec_response_get_version {
char version_string_rw[32];
char reserved[32];
uint32_t current_image;
-} __packed;
+} __ec_align4;
/* Read test */
#define EC_CMD_READ_TEST 0x03
@@ -594,7 +628,7 @@ struct ec_response_get_version {
struct ec_params_read_test {
uint32_t offset;
uint32_t size;
-} __packed;
+} __ec_align4;
/**
* struct ec_response_read_test - Response to the read test command.
@@ -602,7 +636,7 @@ struct ec_params_read_test {
*/
struct ec_response_read_test {
uint32_t data[32];
-} __packed;
+} __ec_align4;
/*
* Get build information
@@ -624,7 +658,7 @@ struct ec_response_get_chip_info {
char vendor[32];
char name[32];
char revision[32];
-} __packed;
+} __ec_align4;
/* Get board HW version */
#define EC_CMD_GET_BOARD_VERSION 0x06
@@ -635,7 +669,7 @@ struct ec_response_get_chip_info {
*/
struct ec_response_board_version {
uint16_t board_version;
-} __packed;
+} __ec_align2;
/*
* Read memory-mapped data.
@@ -655,7 +689,7 @@ struct ec_response_board_version {
struct ec_params_read_memmap {
uint8_t offset;
uint8_t size;
-} __packed;
+} __ec_align1;
/* Read versions supported for a command */
#define EC_CMD_GET_CMD_VERSIONS 0x08
@@ -666,7 +700,7 @@ struct ec_params_read_memmap {
*/
struct ec_params_get_cmd_versions {
uint8_t cmd;
-} __packed;
+} __ec_align1;
/**
* struct ec_params_get_cmd_versions_v1 - Parameters for the get command
@@ -675,7 +709,7 @@ struct ec_params_get_cmd_versions {
*/
struct ec_params_get_cmd_versions_v1 {
uint16_t cmd;
-} __packed;
+} __ec_align2;
/**
* struct ec_response_get_cmd_version - Response to the get command versions.
@@ -684,7 +718,7 @@ struct ec_params_get_cmd_versions_v1 {
*/
struct ec_response_get_cmd_versions {
uint32_t version_mask;
-} __packed;
+} __ec_align4;
/*
* Check EC communications status (busy). This is needed on i2c/spi but not
@@ -707,7 +741,7 @@ enum ec_comms_status {
*/
struct ec_response_get_comms_status {
uint32_t flags; /* Mask of enum ec_comms_status */
-} __packed;
+} __ec_align4;
/* Fake a variety of responses, purely for testing purposes. */
#define EC_CMD_TEST_PROTOCOL 0x0a
@@ -717,12 +751,12 @@ struct ec_params_test_protocol {
uint32_t ec_result;
uint32_t ret_len;
uint8_t buf[32];
-} __packed;
+} __ec_align4;
/* Here it comes... */
struct ec_response_test_protocol {
uint8_t buf[32];
-} __packed;
+} __ec_align4;
/* Get protocol information */
#define EC_CMD_GET_PROTOCOL_INFO 0x0b
@@ -745,7 +779,7 @@ struct ec_response_get_protocol_info {
uint16_t max_request_packet_size;
uint16_t max_response_packet_size;
uint32_t flags;
-} __packed;
+} __ec_align4;
/*****************************************************************************/
@@ -763,12 +797,12 @@ struct ec_response_get_protocol_info {
struct ec_params_get_set_value {
uint32_t flags;
uint32_t value;
-} __packed;
+} __ec_align4;
struct ec_response_get_set_value {
uint32_t flags;
uint32_t value;
-} __packed;
+} __ec_align4;
/* More than one command can use these structs to get/set parameters. */
#define EC_CMD_GSV_PAUSE_IN_S5 0x0c
@@ -863,7 +897,7 @@ enum ec_feature_code {
struct ec_response_get_features {
uint32_t flags[2];
-} __packed;
+} __ec_align4;
/*****************************************************************************/
/* Flash commands */
@@ -888,7 +922,7 @@ struct ec_response_flash_info {
uint32_t write_block_size;
uint32_t erase_block_size;
uint32_t protect_block_size;
-} __packed;
+} __ec_align4;
/*
* Flags for version 1+ flash info command
@@ -929,7 +963,7 @@ struct ec_response_flash_info_1 {
/* Version 1 adds these fields: */
uint32_t write_ideal_size;
uint32_t flags;
-} __packed;
+} __ec_align4;
/*
* Read flash
@@ -946,7 +980,7 @@ struct ec_response_flash_info_1 {
struct ec_params_flash_read {
uint32_t offset;
uint32_t size;
-} __packed;
+} __ec_align4;
/* Write flash */
#define EC_CMD_FLASH_WRITE 0x12
@@ -964,7 +998,7 @@ struct ec_params_flash_write {
uint32_t offset;
uint32_t size;
/* Followed by data to write */
-} __packed;
+} __ec_align4;
/* Erase flash */
#define EC_CMD_FLASH_ERASE 0x13
@@ -977,7 +1011,7 @@ struct ec_params_flash_write {
struct ec_params_flash_erase {
uint32_t offset;
uint32_t size;
-} __packed;
+} __ec_align4;
/*
* Get/set flash protection.
@@ -1023,7 +1057,7 @@ struct ec_params_flash_erase {
struct ec_params_flash_protect {
uint32_t mask;
uint32_t flags;
-} __packed;
+} __ec_align4;
/**
* struct ec_response_flash_protect - Response to the flash protect command.
@@ -1038,7 +1072,7 @@ struct ec_response_flash_protect {
uint32_t flags;
uint32_t valid_flags;
uint32_t writable_flags;
-} __packed;
+} __ec_align4;
/*
* Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
@@ -1070,12 +1104,12 @@ enum ec_flash_region {
*/
struct ec_params_flash_region_info {
uint32_t region;
-} __packed;
+} __ec_align4;
struct ec_response_flash_region_info {
uint32_t offset;
uint32_t size;
-} __packed;
+} __ec_align4;
/* Read/write VbNvContext */
#define EC_CMD_VBNV_CONTEXT 0x17
@@ -1090,11 +1124,11 @@ enum ec_vbnvcontext_op {
struct ec_params_vbnvcontext {
uint32_t op;
uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+} __ec_align4;
struct ec_response_vbnvcontext {
uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+} __ec_align4;
/*****************************************************************************/
/* PWM commands */
@@ -1104,14 +1138,14 @@ struct ec_response_vbnvcontext {
struct ec_response_pwm_get_fan_rpm {
uint32_t rpm;
-} __packed;
+} __ec_align4;
/* Set target fan RPM */
-#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
+#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021
struct ec_params_pwm_set_fan_target_rpm {
uint32_t rpm;
-} __packed;
+} __ec_align_size1;
/* Get keyboard backlight */
#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
@@ -1119,21 +1153,21 @@ struct ec_params_pwm_set_fan_target_rpm {
struct ec_response_pwm_get_keyboard_backlight {
uint8_t percent;
uint8_t enabled;
-} __packed;
+} __ec_align1;
/* Set keyboard backlight */
#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
struct ec_params_pwm_set_keyboard_backlight {
uint8_t percent;
-} __packed;
+} __ec_align1;
/* Set target fan PWM duty cycle */
#define EC_CMD_PWM_SET_FAN_DUTY 0x24
struct ec_params_pwm_set_fan_duty {
uint32_t percent;
-} __packed;
+} __ec_align4;
#define EC_CMD_PWM_SET_DUTY 0x25
/* 16 bit duty cycle, 0xffff = 100% */
@@ -1153,18 +1187,18 @@ struct ec_params_pwm_set_duty {
uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
uint8_t pwm_type; /* ec_pwm_type */
uint8_t index; /* Type-specific index, or 0 if unique */
-} __packed;
+} __ec_align4;
#define EC_CMD_PWM_GET_DUTY 0x26
struct ec_params_pwm_get_duty {
uint8_t pwm_type; /* ec_pwm_type */
uint8_t index; /* Type-specific index, or 0 if unique */
-} __packed;
+} __ec_align1;
struct ec_response_pwm_get_duty {
uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
-} __packed;
+} __ec_align2;
/*****************************************************************************/
/*
@@ -1177,7 +1211,7 @@ struct ec_response_pwm_get_duty {
struct rgb_s {
uint8_t r, g, b;
-};
+} __ec_todo_unpacked;
#define LB_BATTERY_LEVELS 4
@@ -1217,7 +1251,7 @@ struct lightbar_params_v0 {
/* Color palette */
struct rgb_s color[8]; /* 0-3 are Google colors */
-} __packed;
+} __ec_todo_packed;
struct lightbar_params_v1 {
/* Timing */
@@ -1260,14 +1294,14 @@ struct lightbar_params_v1 {
/* Color palette */
struct rgb_s color[8]; /* 0-3 are Google colors */
-} __packed;
+} __ec_todo_packed;
/* Lightbar program */
#define EC_LB_PROG_LEN 192
struct lightbar_program {
uint8_t size;
uint8_t data[EC_LB_PROG_LEN];
-};
+} __ec_todo_unpacked;
struct ec_params_lightbar {
uint8_t cmd; /* Command (see enum lightbar_command) */
@@ -1277,23 +1311,23 @@ struct ec_params_lightbar {
} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
version, get_brightness, get_demo, suspend, resume;
- struct {
+ struct __ec_todo_unpacked {
uint8_t num;
} set_brightness, seq, demo;
- struct {
+ struct __ec_todo_unpacked {
uint8_t ctrl, reg, value;
} reg;
- struct {
+ struct __ec_todo_unpacked {
uint8_t led, red, green, blue;
} set_rgb;
- struct {
+ struct __ec_todo_unpacked {
uint8_t led;
} get_rgb;
- struct {
+ struct __ec_todo_unpacked {
uint8_t enable;
} manual_suspend_ctrl;
@@ -1301,31 +1335,31 @@ struct ec_params_lightbar {
struct lightbar_params_v1 set_params_v1;
struct lightbar_program set_program;
};
-} __packed;
+} __ec_todo_packed;
struct ec_response_lightbar {
union {
- struct {
- struct {
+ struct __ec_todo_unpacked {
+ struct __ec_todo_unpacked {
uint8_t reg;
uint8_t ic0;
uint8_t ic1;
} vals[23];
} dump;
- struct {
+ struct __ec_todo_unpacked {
uint8_t num;
} get_seq, get_brightness, get_demo;
struct lightbar_params_v0 get_params_v0;
struct lightbar_params_v1 get_params_v1;
- struct {
+ struct __ec_todo_unpacked {
uint32_t num;
uint32_t flags;
} version;
- struct {
+ struct __ec_todo_unpacked {
uint8_t red, green, blue;
} get_rgb;
@@ -1335,7 +1369,7 @@ struct ec_response_lightbar {
demo, set_params_v0, set_params_v1,
set_program, manual_suspend_ctrl, suspend, resume;
};
-} __packed;
+} __ec_todo_packed;
/* Lightbar commands */
enum lightbar_command {
@@ -1402,7 +1436,7 @@ struct ec_params_led_control {
uint8_t flags; /* Control flags */
uint8_t brightness[EC_LED_COLOR_COUNT];
-} __packed;
+} __ec_align1;
struct ec_response_led_control {
/*
@@ -1413,7 +1447,7 @@ struct ec_response_led_control {
* Other values means the LED is control by PWM.
*/
uint8_t brightness_range[EC_LED_COLOR_COUNT];
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* Verified boot commands */
@@ -1434,7 +1468,7 @@ struct ec_params_vboot_hash {
uint32_t offset; /* Offset in flash to hash */
uint32_t size; /* Number of bytes to hash */
uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */
-} __packed;
+} __ec_align4;
struct ec_response_vboot_hash {
uint8_t status; /* enum ec_vboot_hash_status */
@@ -1444,7 +1478,7 @@ struct ec_response_vboot_hash {
uint32_t offset; /* Offset in flash which was hashed */
uint32_t size; /* Number of bytes hashed */
uint8_t hash_digest[64]; /* Hash digest data */
-} __packed;
+} __ec_align4;
enum ec_vboot_hash_cmd {
EC_VBOOT_HASH_GET = 0, /* Get current hash status */
@@ -1604,23 +1638,23 @@ struct ec_response_motion_sensor_data {
/* Each sensor is up to 3-axis. */
union {
int16_t data[3];
- struct {
+ struct __ec_todo_packed {
uint16_t reserved;
uint32_t timestamp;
- } __packed;
- struct {
+ };
+ struct __ec_todo_unpacked {
uint8_t activity; /* motionsensor_activity */
uint8_t state;
int16_t add_info[2];
};
};
-} __packed;
+} __ec_todo_packed;
struct ec_params_motion_sense {
uint8_t cmd;
union {
/* Used for MOTIONSENSE_CMD_DUMP. */
- struct {
+ struct __ec_todo_unpacked {
/* no args */
} dump;
@@ -1628,13 +1662,13 @@ struct ec_params_motion_sense {
* Used for MOTIONSENSE_CMD_EC_RATE and
* MOTIONSENSE_CMD_KB_WAKE_ANGLE.
*/
- struct {
+ struct __ec_todo_unpacked {
/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
int16_t data;
} ec_rate, kb_wake_angle;
/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
- struct {
+ struct __ec_todo_packed {
uint8_t sensor_num;
/*
@@ -1660,10 +1694,10 @@ struct ec_params_motion_sense {
* Compass: 1/16 uT
*/
int16_t offset[3];
- } __packed sensor_offset;
+ } sensor_offset;
/* Used for MOTIONSENSE_CMD_INFO. */
- struct {
+ struct __ec_todo_packed {
uint8_t sensor_num;
} info;
@@ -1684,12 +1718,12 @@ struct ec_params_motion_sense {
int32_t data;
} sensor_odr, sensor_range;
};
-} __packed;
+} __ec_todo_packed;
struct ec_response_motion_sense {
union {
/* Used for MOTIONSENSE_CMD_DUMP. */
- struct {
+ struct __ec_todo_unpacked {
/* Flags representing the motion sensor module. */
uint8_t module_flags;
@@ -1704,7 +1738,7 @@ struct ec_response_motion_sense {
} dump;
/* Used for MOTIONSENSE_CMD_INFO. */
- struct {
+ struct __ec_todo_unpacked {
/* Should be element of enum motionsensor_type. */
uint8_t type;
@@ -1723,18 +1757,18 @@ struct ec_response_motion_sense {
* MOTIONSENSE_CMD_SENSOR_RANGE, and
* MOTIONSENSE_CMD_KB_WAKE_ANGLE.
*/
- struct {
+ struct __ec_todo_unpacked {
/* Current value of the parameter queried. */
int32_t ret;
} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
- struct {
+ struct __ec_todo_unpacked {
int16_t temp;
int16_t offset[3];
} sensor_offset, perform_calib;
};
-} __packed;
+} __ec_todo_packed;
/*****************************************************************************/
/* USB charging control commands */
@@ -1745,7 +1779,7 @@ struct ec_response_motion_sense {
struct ec_params_usb_charge_set_mode {
uint8_t usb_port_id;
uint8_t mode;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* Persistent storage for host */
@@ -1761,7 +1795,7 @@ struct ec_response_pstore_info {
uint32_t pstore_size;
/* Access size; read/write offset and size must be a multiple of this */
uint32_t access_size;
-} __packed;
+} __ec_align4;
/*
* Read persistent storage
@@ -1773,7 +1807,7 @@ struct ec_response_pstore_info {
struct ec_params_pstore_read {
uint32_t offset; /* Byte offset to read */
uint32_t size; /* Size to read in bytes */
-} __packed;
+} __ec_align4;
/* Write persistent storage */
#define EC_CMD_PSTORE_WRITE 0x42
@@ -1782,7 +1816,7 @@ struct ec_params_pstore_write {
uint32_t offset; /* Byte offset to write */
uint32_t size; /* Size to write in bytes */
uint8_t data[EC_PSTORE_SIZE_MAX];
-} __packed;
+} __ec_align4;
/*****************************************************************************/
/* Real-time clock */
@@ -1790,11 +1824,11 @@ struct ec_params_pstore_write {
/* RTC params and response structures */
struct ec_params_rtc {
uint32_t time;
-} __packed;
+} __ec_align4;
struct ec_response_rtc {
uint32_t time;
-} __packed;
+} __ec_align4;
/* These use ec_response_rtc */
#define EC_CMD_RTC_GET_VALUE 0x44
@@ -1825,29 +1859,29 @@ enum ec_port80_subcmd {
struct ec_params_port80_read {
uint16_t subcmd;
union {
- struct {
+ struct __ec_todo_unpacked {
uint32_t offset;
uint32_t num_entries;
} read_buffer;
};
-} __packed;
+} __ec_todo_packed;
struct ec_response_port80_read {
union {
- struct {
+ struct __ec_todo_unpacked {
uint32_t writes;
uint32_t history_size;
uint32_t last_boot;
} get_info;
- struct {
+ struct __ec_todo_unpacked {
uint16_t codes[EC_PORT80_SIZE_MAX];
} data;
};
-} __packed;
+} __ec_todo_packed;
struct ec_response_port80_last_boot {
uint16_t code;
-} __packed;
+} __ec_align2;
/*****************************************************************************/
/* Thermal engine commands. Note that there are two implementations. We'll
@@ -1868,17 +1902,17 @@ struct ec_params_thermal_set_threshold {
uint8_t sensor_type;
uint8_t threshold_id;
uint16_t value;
-} __packed;
+} __ec_align2;
/* Version 0 - get */
struct ec_params_thermal_get_threshold {
uint8_t sensor_type;
uint8_t threshold_id;
-} __packed;
+} __ec_align1;
struct ec_response_thermal_get_threshold {
uint16_t value;
-} __packed;
+} __ec_align2;
/* The version 1 structs are visible. */
@@ -1898,12 +1932,12 @@ struct ec_thermal_config {
uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
uint32_t temp_fan_off; /* no active cooling needed */
uint32_t temp_fan_max; /* max active cooling needed */
-} __packed;
+} __ec_align4;
/* Version 1 - get config for one sensor. */
struct ec_params_thermal_get_threshold_v1 {
uint32_t sensor_num;
-} __packed;
+} __ec_align4;
/* This returns a struct ec_thermal_config */
/*
@@ -1913,7 +1947,7 @@ struct ec_params_thermal_get_threshold_v1 {
struct ec_params_thermal_set_threshold_v1 {
uint32_t sensor_num;
struct ec_thermal_config cfg;
-} __packed;
+} __ec_align4;
/* This returns no data */
/****************************************************************************/
@@ -1926,14 +1960,14 @@ struct ec_params_thermal_set_threshold_v1 {
struct ec_params_tmp006_get_calibration {
uint8_t index;
-} __packed;
+} __ec_align1;
struct ec_response_tmp006_get_calibration {
float s0;
float b0;
float b1;
float b2;
-} __packed;
+} __ec_align4;
/* Set TMP006 calibration data */
#define EC_CMD_TMP006_SET_CALIBRATION 0x54
@@ -1945,19 +1979,19 @@ struct ec_params_tmp006_set_calibration {
float b0;
float b1;
float b2;
-} __packed;
+} __ec_align4;
/* Read raw TMP006 data */
#define EC_CMD_TMP006_GET_RAW 0x55
struct ec_params_tmp006_get_raw {
uint8_t index;
-} __packed;
+} __ec_align1;
struct ec_response_tmp006_get_raw {
int32_t t; /* In 1/100 K */
int32_t v; /* In nV */
-};
+} __ec_align4;
/*****************************************************************************/
/* MKBP - Matrix KeyBoard Protocol */
@@ -1984,12 +2018,12 @@ struct ec_response_mkbp_info {
uint32_t cols;
/* Formerly "switches", which was 0. */
uint8_t reserved;
-} __packed;
+} __ec_align_size1;
struct ec_params_mkbp_info {
uint8_t info_type;
uint8_t event_type;
-} __packed;
+} __ec_align1;
enum ec_mkbp_info_type {
/*
@@ -2037,7 +2071,7 @@ struct ec_params_mkbp_simulate_key {
uint8_t col;
uint8_t row;
uint8_t pressed;
-} __packed;
+} __ec_align1;
/* Configure keyboard scanning */
#define EC_CMD_MKBP_SET_CONFIG 0x64
@@ -2083,15 +2117,15 @@ struct ec_mkbp_config {
uint16_t debounce_up_us; /* time for debounce on key up */
/* maximum depth to allow for fifo (0 = no keyscan output) */
uint8_t fifo_max_depth;
-} __packed;
+} __ec_align_size1;
struct ec_params_mkbp_set_config {
struct ec_mkbp_config config;
-} __packed;
+} __ec_align_size1;
struct ec_response_mkbp_get_config {
struct ec_mkbp_config config;
-} __packed;
+} __ec_align_size1;
/* Run the key scan emulation */
#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
@@ -2114,18 +2148,18 @@ enum ec_collect_flags {
struct ec_collect_item {
uint8_t flags; /* some flags (enum ec_collect_flags) */
-};
+} __ec_align1;
struct ec_params_keyscan_seq_ctrl {
uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */
union {
- struct {
+ struct __ec_align1 {
uint8_t active; /* still active */
uint8_t num_items; /* number of items */
/* Current item being presented */
uint8_t cur_item;
} status;
- struct {
+ struct __ec_todo_unpacked {
/*
* Absolute time for this scan, measured from the
* start of the sequence.
@@ -2133,22 +2167,22 @@ struct ec_params_keyscan_seq_ctrl {
uint32_t time_us;
uint8_t scan[0]; /* keyscan data */
} add;
- struct {
+ struct __ec_align1 {
uint8_t start_item; /* First item to return */
uint8_t num_items; /* Number of items to return */
} collect;
};
-} __packed;
+} __ec_todo_packed;
struct ec_result_keyscan_seq_ctrl {
union {
- struct {
+ struct __ec_todo_unpacked {
uint8_t num_items; /* Number of items */
/* Data for each item */
struct ec_collect_item item[0];
} collect;
};
-} __packed;
+} __ec_todo_packed;
/*
* Command for retrieving the next pending MKBP event from the EC device
@@ -2186,8 +2220,8 @@ enum ec_mkbp_event {
EC_MKBP_EVENT_COUNT,
};
-union ec_response_get_next_data {
- uint8_t key_matrix[13];
+union __ec_align_offset1 ec_response_get_next_data {
+ uint8_t key_matrix[13];
/* Unaligned */
uint32_t host_event;
@@ -2195,9 +2229,9 @@ union ec_response_get_next_data {
uint32_t buttons;
uint32_t switches;
uint32_t sysrq;
-} __packed;
+};
-union ec_response_get_next_data_v1 {
+union __ec_align_offset1 ec_response_get_next_data_v1 {
uint8_t key_matrix[16];
uint32_t host_event;
uint32_t buttons;
@@ -2205,19 +2239,19 @@ union ec_response_get_next_data_v1 {
uint32_t sysrq;
uint32_t cec_events;
uint8_t cec_message[16];
-} __packed;
+};
struct ec_response_get_next_event {
uint8_t event_type;
/* Followed by event data if any */
union ec_response_get_next_data data;
-} __packed;
+} __ec_align1;
struct ec_response_get_next_event_v1 {
uint8_t event_type;
/* Followed by event data if any */
union ec_response_get_next_data_v1 data;
-} __packed;
+} __ec_align1;
/* Bit indices for buttons and switches.*/
/* Buttons */
@@ -2238,12 +2272,12 @@ struct ec_response_get_next_event_v1 {
struct ec_params_temp_sensor_get_info {
uint8_t id;
-} __packed;
+} __ec_align1;
struct ec_response_temp_sensor_get_info {
char sensor_name[32];
uint8_t sensor_type;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
@@ -2262,11 +2296,11 @@ struct ec_response_temp_sensor_get_info {
*/
struct ec_params_host_event_mask {
uint32_t mask;
-} __packed;
+} __ec_align4;
struct ec_response_host_event_mask {
uint32_t mask;
-} __packed;
+} __ec_align4;
/* These all use ec_response_host_event_mask */
#define EC_CMD_HOST_EVENT_GET_B 0x87
@@ -2289,7 +2323,7 @@ struct ec_response_host_event_mask {
struct ec_params_switch_enable_backlight {
uint8_t enabled;
-} __packed;
+} __ec_align1;
/* Enable/disable WLAN/Bluetooth */
#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
@@ -2298,7 +2332,7 @@ struct ec_params_switch_enable_backlight {
/* Version 0 params; no response */
struct ec_params_switch_enable_wireless_v0 {
uint8_t enabled;
-} __packed;
+} __ec_align1;
/* Version 1 params */
struct ec_params_switch_enable_wireless_v1 {
@@ -2317,7 +2351,7 @@ struct ec_params_switch_enable_wireless_v1 {
/* Which flags to copy from suspend_flags */
uint8_t suspend_mask;
-} __packed;
+} __ec_align1;
/* Version 1 response */
struct ec_response_switch_enable_wireless_v1 {
@@ -2326,7 +2360,7 @@ struct ec_response_switch_enable_wireless_v1 {
/* Flags to leave enabled in S3 */
uint8_t suspend_flags;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* GPIO commands. Only available on EC if write protect has been disabled. */
@@ -2337,7 +2371,7 @@ struct ec_response_switch_enable_wireless_v1 {
struct ec_params_gpio_set {
char name[32];
uint8_t val;
-} __packed;
+} __ec_align1;
/* Get GPIO value */
#define EC_CMD_GPIO_GET 0x93
@@ -2345,37 +2379,37 @@ struct ec_params_gpio_set {
/* Version 0 of input params and response */
struct ec_params_gpio_get {
char name[32];
-} __packed;
+} __ec_align1;
struct ec_response_gpio_get {
uint8_t val;
-} __packed;
+} __ec_align1;
/* Version 1 of input params and response */
struct ec_params_gpio_get_v1 {
uint8_t subcmd;
union {
- struct {
+ struct __ec_align1 {
char name[32];
} get_value_by_name;
- struct {
+ struct __ec_align1 {
uint8_t index;
} get_info;
};
-} __packed;
+} __ec_align1;
struct ec_response_gpio_get_v1 {
union {
- struct {
+ struct __ec_align1 {
uint8_t val;
} get_value_by_name, get_count;
- struct {
+ struct __ec_todo_unpacked {
uint8_t val;
char name[32];
uint32_t flags;
} get_info;
};
-} __packed;
+} __ec_todo_packed;
enum gpio_get_subcmd {
EC_GPIO_GET_BY_NAME = 0,
@@ -2401,11 +2435,11 @@ struct ec_params_i2c_read {
uint8_t read_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
-} __packed;
+} __ec_align_size1;
struct ec_response_i2c_read {
uint16_t data;
-} __packed;
+} __ec_align2;
/* Write I2C bus */
#define EC_CMD_I2C_WRITE 0x95
@@ -2416,7 +2450,7 @@ struct ec_params_i2c_write {
uint8_t write_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
-} __packed;
+} __ec_align_size1;
/*****************************************************************************/
/* Charge state commands. Only available when flash write protect unlocked. */
@@ -2435,7 +2469,7 @@ enum ec_charge_control_mode {
struct ec_params_charge_control {
uint32_t mode; /* enum charge_control_mode */
-} __packed;
+} __ec_align4;
/*****************************************************************************/
@@ -2463,7 +2497,7 @@ enum ec_console_read_subcmd {
struct ec_params_console_read_v1 {
uint8_t subcmd; /* enum ec_console_read_subcmd */
-} __packed;
+} __ec_align1;
/*****************************************************************************/
@@ -2481,7 +2515,7 @@ struct ec_params_console_read_v1 {
struct ec_params_battery_cutoff {
uint8_t flags;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* USB port mux control. */
@@ -2493,7 +2527,7 @@ struct ec_params_battery_cutoff {
struct ec_params_usb_mux {
uint8_t mux;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* LDOs / FETs control. */
@@ -2511,7 +2545,7 @@ enum ec_ldo_state {
struct ec_params_ldo_set {
uint8_t index;
uint8_t state;
-} __packed;
+} __ec_align1;
/*
* Get LDO state.
@@ -2520,11 +2554,11 @@ struct ec_params_ldo_set {
struct ec_params_ldo_get {
uint8_t index;
-} __packed;
+} __ec_align1;
struct ec_response_ldo_get {
uint8_t state;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* Power info. */
@@ -2540,7 +2574,7 @@ struct ec_response_power_info {
uint16_t voltage_system;
uint16_t current_system;
uint16_t usb_current_limit;
-} __packed;
+} __ec_align4;
/*****************************************************************************/
/* I2C passthru command */
@@ -2562,20 +2596,20 @@ struct ec_response_power_info {
struct ec_params_i2c_passthru_msg {
uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
uint16_t len; /* Number of bytes to read or write */
-} __packed;
+} __ec_align2;
struct ec_params_i2c_passthru {
uint8_t port; /* I2C port number */
uint8_t num_msgs; /* Number of messages */
struct ec_params_i2c_passthru_msg msg[];
/* Data to write for all messages is concatenated here */
-} __packed;
+} __ec_align2;
struct ec_response_i2c_passthru {
uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */
uint8_t num_msgs; /* Number of messages processed */
uint8_t data[]; /* Data read by messages concatenated here */
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* Power button hang detect */
@@ -2630,7 +2664,7 @@ struct ec_params_hang_detect {
/* Timeout in msec before generating warm reboot, if enabled */
uint16_t warm_reboot_timeout_msec;
-} __packed;
+} __ec_align4;
/*****************************************************************************/
/* Commands for battery charging */
@@ -2676,20 +2710,20 @@ struct ec_params_charge_state {
/* no args */
} get_state;
- struct {
+ struct __ec_todo_unpacked {
uint32_t param; /* enum charge_state_param */
} get_param;
- struct {
+ struct __ec_todo_unpacked {
uint32_t param; /* param to set */
uint32_t value; /* value to set */
} set_param;
};
-} __packed;
+} __ec_todo_packed;
struct ec_response_charge_state {
union {
- struct {
+ struct __ec_align4 {
int ac;
int chg_voltage;
int chg_current;
@@ -2697,14 +2731,14 @@ struct ec_response_charge_state {
int batt_state_of_charge;
} get_state;
- struct {
+ struct __ec_align4 {
uint32_t value;
} get_param;
struct {
/* no return values */
} set_param;
};
-} __packed;
+} __ec_align4;
/*
@@ -2714,7 +2748,7 @@ struct ec_response_charge_state {
struct ec_params_current_limit {
uint32_t limit; /* in mA */
-} __packed;
+} __ec_align4;
/*
* Set maximum external voltage / current.
@@ -2725,7 +2759,7 @@ struct ec_params_current_limit {
struct ec_params_external_power_limit_v1 {
uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */
uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */
-} __packed;
+} __ec_align2;
#define EC_POWER_LIMIT_NONE 0xffff
@@ -2741,7 +2775,7 @@ enum host_sleep_event {
struct ec_params_host_sleep_event {
uint8_t sleep_event;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* Smart battery pass-through */
@@ -2758,25 +2792,25 @@ struct ec_params_host_sleep_event {
struct ec_params_sb_rd {
uint8_t reg;
-} __packed;
+} __ec_align1;
struct ec_response_sb_rd_word {
uint16_t value;
-} __packed;
+} __ec_align2;
struct ec_params_sb_wr_word {
uint8_t reg;
uint16_t value;
-} __packed;
+} __ec_align1;
struct ec_response_sb_rd_block {
uint8_t data[32];
-} __packed;
+} __ec_align1;
struct ec_params_sb_wr_block {
uint8_t reg;
uint16_t data[32];
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* Battery vendor parameters
@@ -2798,11 +2832,11 @@ struct ec_params_battery_vendor_param {
uint32_t param;
uint32_t value;
uint8_t mode;
-} __packed;
+} __ec_align_size1;
struct ec_response_battery_vendor_param {
uint32_t value;
-} __packed;
+} __ec_align4;
/*****************************************************************************/
/* Commands for I2S recording on audio codec. */
@@ -2833,7 +2867,7 @@ enum ec_i2s_config {
EC_DAI_FMT_PCM_TDM = 5,
};
-struct ec_param_codec_i2s {
+struct __ec_todo_packed ec_param_codec_i2s {
/* enum ec_codec_i2s_subcmd */
uint8_t cmd;
union {
@@ -2847,10 +2881,10 @@ struct ec_param_codec_i2s {
* EC_CODEC_SET_GAIN
* Value should be 0~43 for both channels.
*/
- struct ec_param_codec_i2s_set_gain {
+ struct __ec_align1 ec_param_codec_i2s_set_gain {
uint8_t left;
uint8_t right;
- } __packed gain;
+ } gain;
/*
* EC_CODEC_I2S_ENABLE
@@ -2868,7 +2902,7 @@ struct ec_param_codec_i2s {
* EC_CODEC_I2S_SET_TDM_CONFIG
* Value should be one of ec_i2s_config.
*/
- struct ec_param_codec_i2s_tdm {
+ struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
/*
* 0 to 496
*/
@@ -2879,14 +2913,14 @@ struct ec_param_codec_i2s {
int16_t ch1_delay;
uint8_t adjacent_to_ch0;
uint8_t adjacent_to_ch1;
- } __packed tdm_param;
+ } tdm_param;
/*
* EC_CODEC_I2S_SET_BCLK
*/
uint32_t bclk;
};
-} __packed;
+};
/*
* For subcommand EC_CODEC_GET_GAIN.
@@ -2894,7 +2928,7 @@ struct ec_param_codec_i2s {
struct ec_response_codec_gain {
uint8_t left;
uint8_t right;
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/* System commands */
@@ -2923,7 +2957,7 @@ enum ec_reboot_cmd {
struct ec_params_reboot_ec {
uint8_t cmd; /* enum ec_reboot_cmd */
uint8_t flags; /* See EC_REBOOT_FLAG_* */
-} __packed;
+} __ec_align1;
/*
* Get information on last EC panic.
@@ -3066,7 +3100,7 @@ struct ec_params_reboot_ec {
*/
struct ec_params_cec_write {
uint8_t msg[EC_MAX_CEC_MSG_LEN];
-} __packed;
+} __ec_align1;
/* Set various CEC parameters */
#define EC_CMD_CEC_SET 0x00BA
@@ -3082,7 +3116,7 @@ struct ec_params_cec_write {
struct ec_params_cec_set {
uint8_t cmd; /* enum cec_command */
uint8_t val;
-} __packed;
+} __ec_align1;
/* Read various CEC parameters */
#define EC_CMD_CEC_GET 0x00BB
@@ -3093,7 +3127,7 @@ struct ec_params_cec_set {
*/
struct ec_params_cec_get {
uint8_t cmd; /* enum cec_command */
-} __packed;
+} __ec_align1;
/**
* struct ec_response_cec_get - CEC parameters get response
@@ -3104,7 +3138,7 @@ struct ec_params_cec_get {
*/
struct ec_response_cec_get {
uint8_t val;
-} __packed;
+} __ec_align1;
/* CEC parameters command */
enum ec_cec_command {
@@ -3177,13 +3211,13 @@ enum mkbp_cec_event {
/* Status of EC being sent to PD */
struct ec_params_pd_status {
int8_t batt_soc; /* battery state of charge */
-} __packed;
+} __ec_align1;
/* Status of PD being sent back to EC */
struct ec_response_pd_status {
int8_t status; /* PD MCU status */
uint32_t curr_lim_ma; /* input current limit */
-} __packed;
+} __ec_align_size1;
/* Set USB type-C port role and muxes */
#define EC_CMD_USB_PD_CONTROL 0x101
@@ -3218,7 +3252,7 @@ struct ec_params_usb_pd_control {
uint8_t role;
uint8_t mux;
uint8_t swap;
-} __packed;
+} __ec_align1;
#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
@@ -3237,7 +3271,7 @@ struct ec_response_usb_pd_control_v1 {
uint8_t role;
uint8_t polarity;
char state[32];
-} __packed;
+} __ec_align1;
#define EC_CMD_USB_PD_PORTS 0x102
@@ -3246,14 +3280,14 @@ struct ec_response_usb_pd_control_v1 {
struct ec_response_usb_pd_ports {
uint8_t num_ports;
-} __packed;
+} __ec_align1;
#define EC_CMD_USB_PD_POWER_INFO 0x103
#define PD_POWER_CHARGING_PORT 0xff
struct ec_params_usb_pd_power_info {
uint8_t port;
-} __packed;
+} __ec_align1;
enum usb_chg_type {
USB_CHG_TYPE_NONE,
@@ -3279,7 +3313,7 @@ struct usb_chg_measures {
uint16_t voltage_now;
uint16_t current_max;
uint16_t current_lim;
-} __packed;
+} __ec_align2;
struct ec_response_usb_pd_power_info {
uint8_t role;
@@ -3288,11 +3322,11 @@ struct ec_response_usb_pd_power_info {
uint8_t reserved1;
struct usb_chg_measures meas;
uint32_t max_power;
-} __packed;
+} __ec_align4;
struct ec_params_usb_pd_info_request {
uint8_t port;
-} __packed;
+} __ec_align1;
/*
* This command will return the number of USB PD charge port + the number
@@ -3302,7 +3336,7 @@ struct ec_params_usb_pd_info_request {
#define EC_CMD_CHARGE_PORT_COUNT 0x0105
struct ec_response_charge_port_count {
uint8_t port_count;
-} __packed;
+} __ec_align1;
/* Read USB-PD Device discovery info */
#define EC_CMD_USB_PD_DISCOVERY 0x0113
@@ -3310,7 +3344,7 @@ struct ec_params_usb_pd_discovery_entry {
uint16_t vid; /* USB-IF VID */
uint16_t pid; /* USB-IF PID */
uint8_t ptype; /* product type (hub,periph,cable,ama) */
-} __packed;
+} __ec_align_size1;
/* Override default charge behavior */
#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114
@@ -3324,7 +3358,7 @@ enum usb_pd_override_ports {
struct ec_params_charge_port_override {
int16_t override_port; /* Override port# */
-} __packed;
+} __ec_align2;
/* Read (and delete) one entry of PD event log */
#define EC_CMD_PD_GET_LOG_ENTRY 0x0115
@@ -3335,7 +3369,7 @@ struct ec_response_pd_log {
uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */
uint16_t data; /* type-defined data payload */
uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
-} __packed;
+} __ec_align4;
/* The timestamp is the microsecond counter shifted to get about a ms. */
#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */
@@ -3401,14 +3435,14 @@ struct mcdp_version {
uint8_t major;
uint8_t minor;
uint16_t build;
-} __packed;
+} __ec_align4;
struct mcdp_info {
uint8_t family[2];
uint8_t chipid[2];
struct mcdp_version irom;
struct mcdp_version fw;
-} __packed;
+} __ec_align4;
/* struct mcdp_info field decoding */
#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
@@ -3419,7 +3453,7 @@ struct mcdp_info {
struct ec_params_usb_pd_mux_info {
uint8_t port; /* USB-C port number */
-} __packed;
+} __ec_align1;
/* Flags representing mux state */
#define USB_PD_MUX_USB_ENABLED (1 << 0)
@@ -3429,7 +3463,7 @@ struct ec_params_usb_pd_mux_info {
struct ec_response_usb_pd_mux_info {
uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
-} __packed;
+} __ec_align1;
/*****************************************************************************/
/*
--
2.21.0.1020.gf2820cf01a-goog
More information about the Alsa-devel
mailing list