[alsa-devel] [PATCH v2 2/5] ASoC: sun4i-spdif: Add support for H6 SoC
Maxime Ripard
maxime.ripard at bootlin.com
Thu May 2 10:25:26 CEST 2019
On Fri, Apr 19, 2019 at 09:17:27PM +0200, Clément Péron wrote:
> Allwinner H6 has a different mapping for the fifo register controller.
>
> Actually only the fifo tx flush bit is used.
>
> Add a new quirk to know the correct fifo tx flush bit.
>
> Signed-off-by: Clément Péron <peron.clem at gmail.com>
> ---
> sound/soc/sunxi/sun4i-spdif.c | 42 ++++++++++++++++++++++++++++++-----
> 1 file changed, 36 insertions(+), 6 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
> index b4af4aabead1..19e4bf9caa24 100644
> --- a/sound/soc/sunxi/sun4i-spdif.c
> +++ b/sound/soc/sunxi/sun4i-spdif.c
> @@ -75,6 +75,18 @@
> #define SUN4I_SPDIF_FCTL_RXOM(v) ((v) << 0)
> #define SUN4I_SPDIF_FCTL_RXOM_MASK GENMASK(1, 0)
>
> +#define SUN50I_H6_SPDIF_FCTL (0x14)
> + #define SUN50I_H6_SPDIF_FCTL_HUB_EN BIT(31)
> + #define SUN50I_H6_SPDIF_FCTL_FTX BIT(30)
> + #define SUN50I_H6_SPDIF_FCTL_FRX BIT(29)
> + #define SUN50I_H6_SPDIF_FCTL_TXTL(v) ((v) << 12)
> + #define SUN50I_H6_SPDIF_FCTL_TXTL_MASK GENMASK(19, 12)
> + #define SUN50I_H6_SPDIF_FCTL_RXTL(v) ((v) << 4)
> + #define SUN50I_H6_SPDIF_FCTL_RXTL_MASK GENMASK(10, 4)
> + #define SUN50I_H6_SPDIF_FCTL_TXIM BIT(2)
> + #define SUN50I_H6_SPDIF_FCTL_RXOM(v) ((v) << 0)
> + #define SUN50I_H6_SPDIF_FCTL_RXOM_MASK GENMASK(1, 0)
> +
> #define SUN4I_SPDIF_FSTA (0x18)
> #define SUN4I_SPDIF_FSTA_TXE BIT(14)
> #define SUN4I_SPDIF_FSTA_TXECNTSHT (8)
> @@ -169,16 +181,25 @@ struct sun4i_spdif_dev {
> struct snd_soc_dai_driver cpu_dai_drv;
> struct regmap *regmap;
> struct snd_dmaengine_dai_dma_data dma_params_tx;
> + const struct sun4i_spdif_quirks *quirks;
I guess this will generate a warning since the structure hasn't been
defined yet?
> +};
> +
> +struct sun4i_spdif_quirks {
> + unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
> + unsigned int reg_fctl_ftx; /* TX FIFO flush bitmask */
> + bool has_reset;
You don't really need to move it around, you can just add the
structure prototype.
If you do want to move it around, then please do so in a separate patch
> };
>
> static void sun4i_spdif_configure(struct sun4i_spdif_dev *host)
> {
> + const struct sun4i_spdif_quirks *quirks = host->quirks;
> +
> /* soft reset SPDIF */
> regmap_write(host->regmap, SUN4I_SPDIF_CTL, SUN4I_SPDIF_CTL_RESET);
>
> /* flush TX FIFO */
> regmap_update_bits(host->regmap, SUN4I_SPDIF_FCTL,
> - SUN4I_SPDIF_FCTL_FTX, SUN4I_SPDIF_FCTL_FTX);
> + quirks->reg_fctl_ftx, quirks->reg_fctl_ftx);
>
> /* clear TX counter */
> regmap_write(host->regmap, SUN4I_SPDIF_TXCNT, 0);
> @@ -405,22 +426,26 @@ static struct snd_soc_dai_driver sun4i_spdif_dai = {
> .name = "spdif",
> };
>
> -struct sun4i_spdif_quirks {
> - unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
> - bool has_reset;
> -};
> -
> static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
> .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
> };
>
> static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
> .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
> .has_reset = true,
> };
>
> static const struct sun4i_spdif_quirks sun8i_h3_spdif_quirks = {
> .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
> + .has_reset = true,
> +};
>
> +static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
> + .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
> .has_reset = true,
The reg_dac_txdata and reg_fctl_ftx changes here should also be part
of a separate patch.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20190502/98864030/attachment.sig>
More information about the Alsa-devel
mailing list