[alsa-devel] [PATCH 09/10] ALSA: pcm: Add snd_pcm_ops for snd_pcm_link()

Takashi Iwai tiwai at suse.de
Tue Mar 26 17:00:07 CET 2019


On Tue, 26 Mar 2019 16:16:54 +0100,
Timo Wischer wrote:
> 
> On 3/26/19 15:23, Takashi Iwai wrote:
> > On Tue, 26 Mar 2019 12:25:37 +0100,
> > Timo Wischer wrote:
> >> On 3/26/19 09:35, Takashi Iwai wrote:
> >>
> >>      On Tue, 26 Mar 2019 08:49:33 +0100,
> >>      <twischer at de.adit-jv.com> wrote:
> >>               From: Timo Wischer <twischer at de.adit-jv.com>
> >>                   snd_pcm_link() can be called by the user as long
> >> as the device is not
> >>          yet started. Therefore currently a driver which wants to iterate over
> >>          the linked substreams has to do this at the start trigger. But the start
> >>          trigger should not block for a long time. Therefore there is no callback
> >>          which can be used to iterate over the linked substreams without delaying
> >>          the start trigger.
> >>          This patch introduces a new callback function which will be called after
> >>          the linked substream list was updated by snd_pcm_link(). This callback
> >>          function is allowed to block for a longer time without interfering the
> >>          synchronized start up of linked substreams.
> >>                   Signed-off-by: Timo Wischer
> >> <twischer at de.adit-jv.com>
> >>               Well, the idea appears interesting, but I'm afraid
> >> that the
> >>      implementation is still racy.  The place you're calling the new
> >>      callback isn't protected, hence the stream can be triggered while
> >>      calling it.  That is, even during operating your loopback link_changed
> >>      callback, another thread is able to start the stream.
> >>      Hi Takashi,
> >>
> >> As far as I got you mean the following scenario:
> >>
> >>    * snd_pcm_link() is called for a HW sound card
> >>        + loopback_snd_timer_link_changed()
> > The start may happen at this point.
> 
> In this case the last link status will be used and aloop will print a
> warning "Another sound timer was requested but at least one device is
> already running...".
> 
> Without this patch set a similar issue already exists. When calling
> snd_pcm_start() before snd_pcm_link() was done the additional device
> linked by the snd_pcm_link() will not be started.
> Therefore the application has already to take care about the order of
> the calls.

Yes, but it doesn't matter for now, just because other drivers do care
the PCM links only for trigger callback.  Now you're trying to add
something new but in an incomplete manner.

> 
> >
> >>        + loopback_snd_timer_open()
> >>        + spin_lock_irqsave(&dpcm->cable->lock, flags);
> >>    * snd_pcm_start() called for aloop sound card
> >>        + loopback_trigger()
> >>        + spin_lock(&cable->lock) -> has to wait till loopback_snd_timer_open()
> >>          calls spin_unlock_irqrestore()
> >>
> >> So far snd_pcm_start() has to wait for loopback_snd_timer_open().
> >>
> >>    * loopback_snd_timer_open() will continue with
> >>        + dpcm->cable->snd_timer.instance = NULL;
> >>        + spin_unlock_irqrestore()
> >>    * loopback_trigger() can enter the lock
> >>        + loopback_snd_timer_start() will fail with -EINVAL due to
> >>          (loopback_trigger == NULL)
> >>
> >> At least this will not result into memory corruption due to race or any other
> >> wired behavior.
> > I don't expect the memory corruption, but my point is that dealing
> > with linked streams is still tricky.  It was considered for the
> > lightweight coupled start/stop operation, and something intensively
> > depending on the linked status was out of the original design...
> >
> >> But my expectation is that snd_pcm_link(hw, aloop) or snd_pcm_link(aloop, hw)
> >> is only called by the application calling snd_pcm_start(aloop)
> >> because the same aloop device cannot be opened by multiple applications at the
> >> same time.
> >>
> >> Do you see an use case where one application would call snd_pcm_start() in
> >> parallel with snd_pcm_link() (somehow configuring the device)?
> > It's not about the actual application usages but rather against the
> > malicious attacks.  Especially aloop is a virtual device that is
> > available allover the places, it may be deployed / attacked easily.
> The attack we are identifying here can only be done by the application
> opening the aloop device.
> An application allowed to open the aloop device is anyway able to
> manipulate the audio streaming.

Right, and if it such a racy access may lead to a driver misbehavior,
it's a big concern.  The proposed callback usage is racy, so some
other implementation might be broken easily in future.

> Or do you see an attack which would influence any other device/stream
> not opened by this application?
>
> >> May be we should add an additional synchronization mechanism in pcm_native.c
> >> to avoid call of snd_pcm_link() in parallel with snd_pcm_start().
> > If it really matters...  Honestly speaking, I'm not fully convinced
> > whether we want to deal with this using the PCM link mechanism.
> >
> > What's the motivation for using the linked streams at the first place?
> > That's one of the biggest missing piece in the whole picture.
> In general when the user uses snd_pcm_link() it expects that the
> linked devices are somehow synchronized.
> Any applications already using snd_pcm_link() do not need to be
> adapted to use the new feature of aloop (for example JACK or ALSA
> multi plugin)
> 
> But when linking a HW sound card and aloop without this patch set,
> both devices will be started in sync but
> the snd_pcm_period_eleapsed() calls of the different devices will
> drift. To avoid this the aloop plugin can automatically use the right
> timer.
> If this feature is not implemented the user has to use snd_pcm_link()
> to trigger snd_pcm_start() in sync but also has to configure the aloop
> plugin to use the right sound timer.
> May be the linked cards can change during runtime of the
> system. Without this feature the aloop kernel driver has to be loaded
> with different kernel parameters
> to select the right timer.
> 
> ALSA controls cannot be used easily. Selecting the sound timer by the
> card number could be error prone because the card ID could change
> between system starts.
> Therefore an ALSA control supporting the card name should be
> used. This could be for example done via an ALSA enum control. But in
> this case the names of all sound cards of the system has to be
> available
> on aloop probe() call. But at this point in time the sound cards
> probed after aloop are not available. Therefore only the sound timers
> of the sound cards probed before aloop are selectable.

Hm.  For me this patch series looks very hackish.  As mentioned, the
PCM link usage is rather just a synchronous trigger start/stop for
multiple streams belonging to the same hardware; in that sense, it'd
be possible to adapt some mechanism for aloop, but at most it should
be much less intrusive change, e.g. just doing the multiple
loopback_timer_start() in a single loop.


thanks,

Takashi


More information about the Alsa-devel mailing list