[alsa-devel] [PATCH v2] ASoC: Intel: Skylake: enable S24_LE format support

[Jenny TC]

From: Jenny TC <jenny.tc at intel.com>

To enable S24_LE format, sample_type in topology fw has to be set to 1.
But sample_type defined in topology firmware configuration is not
getting reflected in the dsp param. This patch sets sample_type in base
config so that the sample type defined in the topology firmware is reflected
in the dsp params. This issues was uncovered while debugging the S24_LE format
which require the MSB byte in 32 bit word to be skipped. Setting sample_type
in topology firmware to 1 helps to skip MSB byte word.

Signed-off-by: Jenny TC <jenny.tc at intel.com>
---
 sound/soc/intel/skylake/skl-messages.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index 28c4806..4bf70b4 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -483,6 +483,7 @@ static void skl_set_base_module_format(struct skl_sst *ctx,
 	base_cfg->audio_fmt.bit_depth = format->bit_depth;
 	base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth;
 	base_cfg->audio_fmt.ch_cfg = format->ch_cfg;
+	base_cfg->audio_fmt.sample_type = format->sample_type;
 
 	dev_dbg(ctx->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n",
 			format->bit_depth, format->valid_bit_depth,
-- 
1.9.1