[alsa-devel] [PATCH V2] ASoC: fix hdmi codec driver contest in S3
Yang, Libin
libin.yang at intel.com
Fri Mar 22 10:12:37 CET 2019
Hi Takashi,
>-----Original Message-----
>From: Takashi Iwai [mailto:tiwai at suse.de]
>Sent: Friday, March 22, 2019 5:04 PM
>To: Yang, Libin <libin.yang at intel.com>
>Cc: alsa-devel at alsa-project.org; broonie at kernel.org
>Subject: Re: [alsa-devel] [PATCH V2] ASoC: fix hdmi codec driver contest in S3
>
>On Fri, 22 Mar 2019 07:24:56 +0100,
>libin.yang at intel.com wrote:
>>
>> From: Libin Yang <libin.yang at intel.com>
>>
>> In S3, there is a contest between dapm event and getting display power.
>>
>> When resume, the sequence is:
>>
>> hdac_hdmi_runtime_resume()
>> => snd_hdac_display_power()
>> hdac_hdmi_xxx_widget_event()
>>
>> The hdac_hdmi_xxx_widget_event() are based on the power being on.
>> Otherwise, the operation on the codec register will fail.
>>
>> However, in snd_hdac_display_power(), it may sleep because of the
>> mutex_lock() in display driver. In this case,
>> hdac_hdmi_xxx_widget_event() will be called before the power is on.
>>
>> Let's not operate the registers and wait for the power in
>> hdac_hdmi_xxx_widget_event()
>>
>> Signed-off-by: Libin Yang <libin.yang at intel.com>
>
>IMO the workaround looks a bit too fragile. The substantial problem is the
>race between codec and DAPM. Can this be controlled better, e.g. by defining
>the proper PM dependency? I thought we may rearrange the PM topology
>dynamically.
It seems codec and DAPM is OK so far. Codec resume will be called firstly
and then DAPM. But in HDMI codec runtime resume, it will call
snd_hdac_display_power(). This function will try to get a mutex_lock.
If it fails to get the lock, it will sleep. This will cause dapm event handler
to be called before audio power domain in display is on in the HDMI driver.
Regards,
Libin
>
>
>thanks,
>
>Takashi
>
>> ---
>> sound/soc/codecs/hdac_hdmi.c | 36
>> ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>>
>> diff --git a/sound/soc/codecs/hdac_hdmi.c
>> b/sound/soc/codecs/hdac_hdmi.c index 5eeb0fe..3c5c122 100644
>> --- a/sound/soc/codecs/hdac_hdmi.c
>> +++ b/sound/soc/codecs/hdac_hdmi.c
>> @@ -144,6 +144,7 @@ struct hdac_hdmi_priv {
>> int num_pin;
>> int num_cvt;
>> int num_ports;
>> + int display_power; /* 0: power off; 1 power on */
>> struct mutex pin_mutex;
>> struct hdac_chmap chmap;
>> struct hdac_hdmi_drv_data *drv_data; @@ -742,12 +743,27 @@
>static
>> void hdac_hdmi_set_amp(struct hdac_device *hdev,
>> AC_VERB_SET_AMP_GAIN_MUTE,
>val); }
>>
>> +static int wait_for_display_power(struct hdac_hdmi_priv *hdmi) {
>> + int i = 0;
>> +
>> + /* sleep for totally 80ms ~ 200ms should be enough */
>> + while (i < 40) {
>> + if (!hdmi->display_power)
>> + usleep_range(2000, 5000);
>> + else
>> + return 0;
>> + i++;
>> + }
>> + return -EAGAIN;
>> +}
>>
>> static int hdac_hdmi_pin_output_widget_event(struct
>snd_soc_dapm_widget *w,
>> struct snd_kcontrol *kc, int event) {
>> struct hdac_hdmi_port *port = w->priv;
>> struct hdac_device *hdev = dev_to_hdac_dev(w->dapm->dev);
>> + struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
>> struct hdac_hdmi_pcm *pcm;
>>
>> dev_dbg(&hdev->dev, "%s: widget: %s event: %x\n", @@ -757,6
>+773,11
>> @@ static int hdac_hdmi_pin_output_widget_event(struct
>snd_soc_dapm_widget *w,
>> if (!pcm)
>> return -EIO;
>>
>> + if (wait_for_display_power(hdmi)) {
>> + dev_err(&hdev->dev, "%s: hdmi power is not ready\n",
>__func__);
>> + return -EAGAIN;
>> + }
>> +
>> /* set the device if pin is mst_capable */
>> if (hdac_hdmi_port_select_set(hdev, port) < 0)
>> return -EIO;
>> @@ -803,6 +824,11 @@ static int
>hdac_hdmi_cvt_output_widget_event(struct snd_soc_dapm_widget *w,
>> if (!pcm)
>> return -EIO;
>>
>> + if (wait_for_display_power(hdmi)) {
>> + dev_err(&hdev->dev, "%s: hdmi power is not ready\n",
>__func__);
>> + return -EAGAIN;
>> + }
>> +
>> switch (event) {
>> case SND_SOC_DAPM_PRE_PMU:
>> hdac_hdmi_set_power_state(hdev, cvt->nid, AC_PWRST_D0);
>@@ -840,6
>> +866,7 @@ static int hdac_hdmi_pin_mux_widget_event(struct
>> snd_soc_dapm_widget *w, {
>> struct hdac_hdmi_port *port = w->priv;
>> struct hdac_device *hdev = dev_to_hdac_dev(w->dapm->dev);
>> + struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
>> int mux_idx;
>>
>> dev_dbg(&hdev->dev, "%s: widget: %s event: %x\n", @@ -850,6
>+877,11
>> @@ static int hdac_hdmi_pin_mux_widget_event(struct
>> snd_soc_dapm_widget *w,
>>
>> mux_idx = dapm_kcontrol_get_value(kc);
>>
>> + if (wait_for_display_power(hdmi)) {
>> + dev_err(&hdev->dev, "%s: hdmi power is not ready\n",
>__func__);
>> + return -EAGAIN;
>> + }
>> +
>> /* set the device if pin is mst_capable */
>> if (hdac_hdmi_port_select_set(hdev, port) < 0)
>> return -EIO;
>> @@ -2068,6 +2100,7 @@ static int hdac_hdmi_runtime_suspend(struct
>> device *dev) {
>> struct hdac_device *hdev = dev_to_hdac_dev(dev);
>> struct hdac_bus *bus = hdev->bus;
>> + struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
>> struct hdac_ext_link *hlink = NULL;
>>
>> dev_dbg(dev, "Enter: %s\n", __func__); @@ -2095,6 +2128,7 @@
>static
>> int hdac_hdmi_runtime_suspend(struct device *dev)
>> snd_hdac_ext_bus_link_put(bus, hlink);
>>
>> snd_hdac_display_power(bus, hdev->addr, false);
>> + hdmi->display_power = 0;
>>
>> return 0;
>> }
>> @@ -2102,6 +2136,7 @@ static int hdac_hdmi_runtime_suspend(struct
>> device *dev) static int hdac_hdmi_runtime_resume(struct device *dev)
>> {
>> struct hdac_device *hdev = dev_to_hdac_dev(dev);
>> + struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
>> struct hdac_bus *bus = hdev->bus;
>> struct hdac_ext_link *hlink = NULL;
>>
>> @@ -2128,6 +2163,7 @@ static int hdac_hdmi_runtime_resume(struct
>device *dev)
>> snd_hdac_codec_read(hdev, hdev->afg, 0,
> AC_VERB_SET_POWER_STATE,
>> AC_PWRST_D0);
>>
>> + hdmi->display_power = 1;
>> return 0;
>> }
>> #else
>> --
>> 2.7.4
>>
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel at alsa-project.org
>> https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>>
More information about the Alsa-devel
mailing list