[alsa-devel] [PATCH v4 07/20] ASoC: SOF: Intel: Add Intel specific HDA firmware loader
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Thu Mar 21 17:10:42 CET 2019
From: Liam Girdwood <liam.r.girdwood at linux.intel.com>
Add support for loading DSP firmware on Intel HDA based platforms.
Signed-off-by: Keyon Jie <yang.jie at linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood at linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
sound/soc/sof/intel/hda-loader.c | 366 +++++++++++++++++++++++++++++++
1 file changed, 366 insertions(+)
create mode 100644 sound/soc/sof/intel/hda-loader.c
diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
new file mode 100644
index 000000000000..4f182e6326f2
--- /dev/null
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license. When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Authors: Liam Girdwood <liam.r.girdwood at linux.intel.com>
+// Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
+// Rander Wang <rander.wang at intel.com>
+// Keyon Jie <yang.jie at linux.intel.com>
+//
+
+/*
+ * Hardware interface for HDA DSP code loader
+ */
+
+#include <linux/firmware.h>
+#include <sound/hdaudio_ext.h>
+#include <sound/sof.h>
+#include "../ops.h"
+#include "hda.h"
+
+#define HDA_FW_BOOT_ATTEMPTS 3
+
+static int cl_stream_prepare(struct snd_sof_dev *sdev, unsigned int format,
+ unsigned int size, struct snd_dma_buffer *dmab,
+ int direction)
+{
+ struct hdac_ext_stream *dsp_stream = NULL;
+ struct hdac_stream *hstream;
+ struct pci_dev *pci = to_pci_dev(sdev->dev);
+ int ret;
+
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ dsp_stream = hda_dsp_stream_get(sdev, direction);
+ } else {
+ dev_err(sdev->dev, "error: code loading DMA is playback only\n");
+ return -EINVAL;
+ }
+
+ if (!dsp_stream) {
+ dev_err(sdev->dev, "error: no stream available\n");
+ return -ENODEV;
+ }
+ hstream = &dsp_stream->hstream;
+
+ /* allocate DMA buffer */
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: memory alloc failed: %x\n", ret);
+ goto error;
+ }
+
+ hstream->period_bytes = 0;/* initialize period_bytes */
+ hstream->format_val = format;
+ hstream->bufsize = size;
+
+ ret = hda_dsp_stream_hw_params(sdev, dsp_stream, dmab, NULL);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret);
+ goto error;
+ }
+
+ hda_dsp_stream_spib_config(sdev, dsp_stream, HDA_DSP_SPIB_ENABLE, size);
+
+ return hstream->stream_tag;
+
+error:
+ hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
+ snd_dma_free_pages(dmab);
+ return ret;
+}
+
+/*
+ * first boot sequence has some extra steps. core 0 waits for power
+ * status on core 1, so power up core 1 also momentarily, keep it in
+ * reset/stall and then turn it off
+ */
+static int cl_dsp_init(struct snd_sof_dev *sdev, const void *fwdata,
+ u32 fwsize, int stream_tag)
+{
+ struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+ const struct sof_intel_dsp_desc *chip = hda->desc;
+ int ret;
+
+ /* step 1: power up corex */
+ ret = hda_dsp_core_power_up(sdev, chip->cores_mask);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n");
+ goto err;
+ }
+
+ /* step 2: purge FW request */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR, chip->ipc_req,
+ chip->ipc_req_mask | (HDA_DSP_IPC_PURGE_FW |
+ ((stream_tag - 1) << 9)));
+
+ /* step 3: unset core 0 reset state & unstall/run core 0 */
+ ret = hda_dsp_core_run(sdev, HDA_DSP_CORE_MASK(0));
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: dsp core start failed %d\n", ret);
+ ret = -EIO;
+ goto err;
+ }
+
+ /* step 4: wait for IPC DONE bit from ROM */
+ ret = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR,
+ chip->ipc_ack,
+ chip->ipc_ack_mask, chip->ipc_ack_mask,
+ HDA_DSP_INIT_TIMEOUT,
+ HDA_DSP_REG_POLL_INTERVAL_US);
+
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: waiting for HIPCIE done\n");
+ goto err;
+ }
+
+ /* step 5: power down corex */
+ ret = hda_dsp_core_power_down(sdev,
+ chip->cores_mask & ~(HDA_DSP_CORE_MASK(0)));
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: dsp core x power down failed\n");
+ goto err;
+ }
+
+ /* step 6: enable IPC interrupts */
+ hda_dsp_ipc_int_enable(sdev);
+
+ /* step 7: wait for ROM init */
+ ret = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR,
+ HDA_DSP_SRAM_REG_ROM_STATUS,
+ HDA_DSP_ROM_STS_MASK, HDA_DSP_ROM_INIT,
+ chip->rom_init_timeout,
+ HDA_DSP_REG_POLL_INTERVAL_US);
+ if (!ret)
+ return 0;
+
+err:
+ hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
+ hda_dsp_core_reset_power_down(sdev, chip->cores_mask);
+
+ return ret;
+}
+
+static int cl_trigger(struct snd_sof_dev *sdev,
+ struct hdac_ext_stream *stream, int cmd)
+{
+ struct hdac_stream *hstream = &stream->hstream;
+ int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
+
+ /* code loader is special case that reuses stream ops */
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ wait_event_timeout(sdev->waitq, !sdev->code_loading,
+ HDA_DSP_CL_TRIGGER_TIMEOUT);
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL,
+ 1 << hstream->index,
+ 1 << hstream->index);
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
+ sd_offset,
+ SOF_HDA_SD_CTL_DMA_START |
+ SOF_HDA_CL_DMA_SD_INT_MASK,
+ SOF_HDA_SD_CTL_DMA_START |
+ SOF_HDA_CL_DMA_SD_INT_MASK);
+
+ hstream->running = true;
+ return 0;
+ default:
+ return hda_dsp_stream_trigger(sdev, stream, cmd);
+ }
+}
+
+static struct hdac_ext_stream *get_stream_with_tag(struct snd_sof_dev *sdev,
+ int tag)
+{
+ struct hdac_bus *bus = sof_to_bus(sdev);
+ struct hdac_stream *s;
+
+ /* get stream with tag */
+ list_for_each_entry(s, &bus->stream_list, list) {
+ if (s->direction == SNDRV_PCM_STREAM_PLAYBACK &&
+ s->stream_tag == tag) {
+ return stream_to_hdac_ext_stream(s);
+ }
+ }
+
+ return NULL;
+}
+
+static int cl_cleanup(struct snd_sof_dev *sdev, struct snd_dma_buffer *dmab,
+ struct hdac_ext_stream *stream)
+{
+ struct hdac_stream *hstream = &stream->hstream;
+ int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
+ int ret;
+
+ ret = hda_dsp_stream_spib_config(sdev, stream, HDA_DSP_SPIB_DISABLE, 0);
+
+ hda_dsp_stream_put(sdev, SNDRV_PCM_STREAM_PLAYBACK,
+ hstream->stream_tag);
+ hstream->running = 0;
+ hstream->substream = NULL;
+
+ /* reset BDL address */
+ snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL, 0);
+ snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0);
+
+ snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset, 0);
+ snd_dma_free_pages(dmab);
+ dmab->area = NULL;
+ hstream->bufsize = 0;
+ hstream->format_val = 0;
+
+ return ret;
+}
+
+static int cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *stream)
+{
+ int ret, status;
+
+ ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_START);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: DMA trigger start failed\n");
+ return ret;
+ }
+
+ status = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR,
+ HDA_DSP_SRAM_REG_ROM_STATUS,
+ HDA_DSP_ROM_STS_MASK,
+ HDA_DSP_ROM_FW_ENTERED,
+ HDA_DSP_BASEFW_TIMEOUT,
+ HDA_DSP_REG_POLL_INTERVAL_US);
+
+ ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_STOP);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: DMA trigger stop failed\n");
+ return ret;
+ }
+
+ return status;
+}
+
+int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
+{
+ struct snd_sof_pdata *plat_data = sdev->pdata;
+ const struct sof_dev_desc *desc = plat_data->desc;
+ const struct sof_intel_dsp_desc *chip_info;
+ struct hdac_ext_stream *stream;
+ struct firmware stripped_firmware;
+ int ret, ret1, tag, i;
+
+ chip_info = (struct sof_intel_dsp_desc *)desc->chip_info;
+
+ stripped_firmware.data = plat_data->fw->data;
+ stripped_firmware.size = plat_data->fw->size;
+
+ /* init for booting wait */
+ init_waitqueue_head(&sdev->boot_wait);
+ sdev->boot_complete = false;
+
+ /* prepare DMA for code loader stream */
+ tag = cl_stream_prepare(sdev, 0x40, stripped_firmware.size,
+ &sdev->dmab, SNDRV_PCM_STREAM_PLAYBACK);
+
+ if (tag < 0) {
+ dev_err(sdev->dev, "error: dma prepare for fw loading err: %x\n",
+ tag);
+ return tag;
+ }
+
+ /* get stream with tag */
+ stream = get_stream_with_tag(sdev, tag);
+ if (!stream) {
+ dev_err(sdev->dev,
+ "error: could not get stream with stream tag %d\n",
+ tag);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ memcpy(sdev->dmab.area, stripped_firmware.data,
+ stripped_firmware.size);
+
+ /* try ROM init a few times before giving up */
+ for (i = 0; i < HDA_FW_BOOT_ATTEMPTS; i++) {
+ ret = cl_dsp_init(sdev, stripped_firmware.data,
+ stripped_firmware.size, tag);
+
+ /* don't retry anymore if successful */
+ if (!ret)
+ break;
+
+ dev_err(sdev->dev, "error: Error code=0x%x: FW status=0x%x\n",
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_DSP_SRAM_REG_ROM_ERROR),
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_DSP_SRAM_REG_ROM_STATUS));
+ dev_err(sdev->dev, "error: iteration %d of Core En/ROM load failed: %d\n",
+ i, ret);
+ }
+
+ if (i == HDA_FW_BOOT_ATTEMPTS) {
+ dev_err(sdev->dev, "error: dsp init failed after %d attempts with err: %d\n",
+ i, ret);
+ goto cleanup;
+ }
+
+ /*
+ * at this point DSP ROM has been initialized and
+ * should be ready for code loading and firmware boot
+ */
+ ret = cl_copy_fw(sdev, stream);
+ if (!ret)
+ dev_dbg(sdev->dev, "Firmware download successful, booting...\n");
+ else
+ dev_err(sdev->dev, "error: load fw failed ret: %d\n", ret);
+
+cleanup:
+ /*
+ * Perform codeloader stream cleanup.
+ * This should be done even if firmware loading fails.
+ */
+ ret1 = cl_cleanup(sdev, &sdev->dmab, stream);
+ if (ret1 < 0) {
+ dev_err(sdev->dev, "error: Code loader DSP cleanup failed\n");
+
+ /* set return value to indicate cleanup failure */
+ ret = ret1;
+ }
+
+ /*
+ * return master core id if both fw copy
+ * and stream clean up are successful
+ */
+ if (!ret)
+ return chip_info->init_core_mask;
+
+ /* dump dsp registers and disable DSP upon error */
+err:
+ hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
+
+ /* disable DSP */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR,
+ SOF_HDA_REG_PP_PPCTL,
+ SOF_HDA_PPCTL_GPROCEN, 0);
+ return ret;
+}
+
+/* pre fw run operations */
+int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev)
+{
+ /* disable clock gating and power gating */
+ return hda_dsp_ctrl_clock_power_gating(sdev, false);
+}
+
+/* post fw run operations */
+int hda_dsp_post_fw_run(struct snd_sof_dev *sdev)
+{
+ /* re-enable clock gating and power gating */
+ return hda_dsp_ctrl_clock_power_gating(sdev, true);
+}
--
2.17.1
More information about the Alsa-devel
mailing list