[alsa-devel] Applied "ASoC: rt1308: Add RT1308 amplifier driver" to the asoc tree
Mark Brown
broonie at kernel.org
Fri Jun 28 18:56:22 CEST 2019
The patch
ASoC: rt1308: Add RT1308 amplifier driver
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 2b9def8c0d92769eef3ef70d0a7c3646ab185d39 Mon Sep 17 00:00:00 2001
From: Derek Fang <derek.fang at realtek.com>
Date: Fri, 28 Jun 2019 20:51:43 +0800
Subject: [PATCH] ASoC: rt1308: Add RT1308 amplifier driver
This is the initial amplifier driver for rt1308.
Signed-off-by: Derek Fang <derek.fang at realtek.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
.../devicetree/bindings/sound/rt1308.txt | 17 +
sound/soc/codecs/Kconfig | 6 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/rt1308.c | 899 ++++++++++++++++++
sound/soc/codecs/rt1308.h | 291 ++++++
5 files changed, 1215 insertions(+)
create mode 100755 Documentation/devicetree/bindings/sound/rt1308.txt
create mode 100755 sound/soc/codecs/rt1308.c
create mode 100755 sound/soc/codecs/rt1308.h
diff --git a/Documentation/devicetree/bindings/sound/rt1308.txt b/Documentation/devicetree/bindings/sound/rt1308.txt
new file mode 100755
index 000000000000..2d46084afce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1308.txt
@@ -0,0 +1,17 @@
+RT1308 audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1308".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1308: rt1308 at 10 {
+ compatible = "realtek,rt1308";
+ reg = <0x10>;
+};
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index b2d445b4bbf5..9f89a5346299 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -146,6 +146,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_RT298 if I2C
select SND_SOC_RT1011 if I2C
select SND_SOC_RT1305 if I2C
+ select SND_SOC_RT1308 if I2C
select SND_SOC_RT5514 if I2C
select SND_SOC_RT5616 if I2C
select SND_SOC_RT5631 if I2C
@@ -904,6 +905,7 @@ config SND_SOC_RL6231
default y if SND_SOC_RT5682=y
default y if SND_SOC_RT1011=y
default y if SND_SOC_RT1305=y
+ default y if SND_SOC_RT1308=y
default m if SND_SOC_RT5514=m
default m if SND_SOC_RT5616=m
default m if SND_SOC_RT5640=m
@@ -919,6 +921,7 @@ config SND_SOC_RL6231
default m if SND_SOC_RT5682=m
default m if SND_SOC_RT1011=m
default m if SND_SOC_RT1305=m
+ default m if SND_SOC_RT1308=m
config SND_SOC_RL6347A
tristate
@@ -947,6 +950,9 @@ config SND_SOC_RT1011
config SND_SOC_RT1305
tristate
+config SND_SOC_RT1308
+ tristate
+
config SND_SOC_RT5514
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ed74f5babf59..5b4bb8cf4325 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -148,6 +148,7 @@ snd-soc-rl6231-objs := rl6231.o
snd-soc-rl6347a-objs := rl6347a.o
snd-soc-rt1011-objs := rt1011.o
snd-soc-rt1305-objs := rt1305.o
+snd-soc-rt1308-objs := rt1308.o
snd-soc-rt274-objs := rt274.o
snd-soc-rt286-objs := rt286.o
snd-soc-rt298-objs := rt298.o
@@ -428,6 +429,7 @@ obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o
obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o
obj-$(CONFIG_SND_SOC_RT1011) += snd-soc-rt1011.o
obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o
+obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o
obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o
obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o
obj-$(CONFIG_SND_SOC_RT298) += snd-soc-rt298.o
diff --git a/sound/soc/codecs/rt1308.c b/sound/soc/codecs/rt1308.c
new file mode 100755
index 000000000000..619a630e982e
--- /dev/null
+++ b/sound/soc/codecs/rt1308.c
@@ -0,0 +1,899 @@
+/*
+ * rt1308.c -- RT1308 ALSA SoC amplifier component driver
+ *
+ * Copyright 2019 Realtek Semiconductor Corp.
+ * Author: Derek Fang <derek.fang at realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/of_gpio.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "rl6231.h"
+#include "rt1308.h"
+
+static const struct reg_sequence init_list[] = {
+
+ { RT1308_I2C_I2S_SDW_SET, 0x01014005 },
+ { RT1308_CLASS_D_SET_2, 0x227f5501 },
+ { RT1308_PADS_1, 0x50150505 },
+ { RT1308_VREF, 0x18100000 },
+ { RT1308_IV_SENSE, 0x87010000 },
+ { RT1308_DUMMY_REG, 0x00000200 },
+ { RT1308_SIL_DET, 0x61c30000 },
+ { RT1308_DC_CAL_2, 0x00ffff00 },
+ { RT1308_CLK_DET, 0x01000000 },
+ { RT1308_POWER_STATUS, 0x00800000 },
+ { RT1308_DAC_SET, 0xafaf0700 },
+
+};
+#define RT1308_INIT_REG_LEN ARRAY_SIZE(init_list)
+
+struct rt1308_priv {
+ struct snd_soc_component *component;
+ struct regmap *regmap;
+
+ int sysclk;
+ int sysclk_src;
+ int lrck;
+ int bclk;
+ int master;
+
+ int pll_src;
+ int pll_in;
+ int pll_out;
+};
+
+static const struct reg_default rt1308_reg[] = {
+
+ { 0x01, 0x1f3f5f00 },
+ { 0x02, 0x07000000 },
+ { 0x03, 0x80003e00 },
+ { 0x04, 0x80800600 },
+ { 0x05, 0x0aaa1a0a },
+ { 0x06, 0x52000000 },
+ { 0x07, 0x00000000 },
+ { 0x08, 0x00600000 },
+ { 0x09, 0xe1030000 },
+ { 0x0a, 0x00000000 },
+ { 0x0b, 0x30000000 },
+ { 0x0c, 0x7fff7000 },
+ { 0x10, 0xffff0700 },
+ { 0x11, 0x0a000000 },
+ { 0x12, 0x60040000 },
+ { 0x13, 0x00000000 },
+ { 0x14, 0x0f300000 },
+ { 0x15, 0x00000022 },
+ { 0x16, 0x02000000 },
+ { 0x17, 0x01004045 },
+ { 0x18, 0x00000000 },
+ { 0x19, 0x00000000 },
+ { 0x1a, 0x80000000 },
+ { 0x1b, 0x10325476 },
+ { 0x1c, 0x1d1d0000 },
+ { 0x20, 0xd2101300 },
+ { 0x21, 0xf3ffff00 },
+ { 0x22, 0x00000000 },
+ { 0x23, 0x00000000 },
+ { 0x24, 0x00000000 },
+ { 0x25, 0x00000000 },
+ { 0x26, 0x00000000 },
+ { 0x27, 0x00000000 },
+ { 0x28, 0x00000000 },
+ { 0x29, 0x00000000 },
+ { 0x2a, 0x00000000 },
+ { 0x2b, 0x00000000 },
+ { 0x2c, 0x00000000 },
+ { 0x2d, 0x00000000 },
+ { 0x2e, 0x00000000 },
+ { 0x2f, 0x00000000 },
+ { 0x30, 0x01000000 },
+ { 0x31, 0x20025501 },
+ { 0x32, 0x00000000 },
+ { 0x33, 0x105a0000 },
+ { 0x34, 0x10100000 },
+ { 0x35, 0x2aaa52aa },
+ { 0x36, 0x00c00000 },
+ { 0x37, 0x20046100 },
+ { 0x50, 0x10022f00 },
+ { 0x51, 0x003c0000 },
+ { 0x54, 0x04000000 },
+ { 0x55, 0x01000000 },
+ { 0x56, 0x02000000 },
+ { 0x57, 0x02000000 },
+ { 0x58, 0x02000000 },
+ { 0x59, 0x02000000 },
+ { 0x5b, 0x02000000 },
+ { 0x5c, 0x00000000 },
+ { 0x5d, 0x00000000 },
+ { 0x5e, 0x00000000 },
+ { 0x5f, 0x00000000 },
+ { 0x60, 0x02000000 },
+ { 0x61, 0x00000000 },
+ { 0x62, 0x00000000 },
+ { 0x63, 0x00000000 },
+ { 0x64, 0x00000000 },
+ { 0x65, 0x02000000 },
+ { 0x66, 0x00000000 },
+ { 0x67, 0x00000000 },
+ { 0x68, 0x00000000 },
+ { 0x69, 0x00000000 },
+ { 0x6a, 0x02000000 },
+ { 0x6c, 0x00000000 },
+ { 0x6d, 0x00000000 },
+ { 0x6e, 0x00000000 },
+ { 0x70, 0x10EC1308 },
+ { 0x71, 0x00000000 },
+ { 0x72, 0x00000000 },
+ { 0x73, 0x00000000 },
+ { 0x74, 0x00000000 },
+ { 0x75, 0x00000000 },
+ { 0x76, 0x00000000 },
+ { 0x77, 0x00000000 },
+ { 0x78, 0x00000000 },
+ { 0x79, 0x00000000 },
+ { 0x7a, 0x00000000 },
+ { 0x7b, 0x00000000 },
+ { 0x7c, 0x00000000 },
+ { 0x7d, 0x00000000 },
+ { 0x7e, 0x00000000 },
+ { 0x7f, 0x00020f00 },
+ { 0x80, 0x00000000 },
+ { 0x81, 0x00000000 },
+ { 0x82, 0x00000000 },
+ { 0x83, 0x00000000 },
+ { 0x84, 0x00000000 },
+ { 0x85, 0x00000000 },
+ { 0x86, 0x00000000 },
+ { 0x87, 0x00000000 },
+ { 0x88, 0x00000000 },
+ { 0x89, 0x00000000 },
+ { 0x8a, 0x00000000 },
+ { 0x8b, 0x00000000 },
+ { 0x8c, 0x00000000 },
+ { 0x8d, 0x00000000 },
+ { 0x8e, 0x00000000 },
+ { 0x90, 0x50250905 },
+ { 0x91, 0x15050000 },
+ { 0xa0, 0x00000000 },
+ { 0xa1, 0x00000000 },
+ { 0xa2, 0x00000000 },
+ { 0xa3, 0x00000000 },
+ { 0xa4, 0x00000000 },
+ { 0xb0, 0x00000000 },
+ { 0xb1, 0x00000000 },
+ { 0xb2, 0x00000000 },
+ { 0xb3, 0x00000000 },
+ { 0xb4, 0x00000000 },
+ { 0xb5, 0x00000000 },
+ { 0xb6, 0x00000000 },
+ { 0xb7, 0x00000000 },
+ { 0xb8, 0x00000000 },
+ { 0xb9, 0x00000000 },
+ { 0xba, 0x00000000 },
+ { 0xbb, 0x00000000 },
+ { 0xc0, 0x01000000 },
+ { 0xc1, 0x00000000 },
+ { 0xf0, 0x00000000 },
+};
+
+static int rt1308_reg_init(struct snd_soc_component *component)
+{
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+
+ return regmap_multi_reg_write(rt1308->regmap, init_list,
+ RT1308_INIT_REG_LEN);
+}
+
+static bool rt1308_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RT1308_RESET:
+ case RT1308_RESET_N:
+ case RT1308_CLK_2:
+ case RT1308_SIL_DET:
+ case RT1308_CLK_DET:
+ case RT1308_DC_DET:
+ case RT1308_DAC_SET:
+ case RT1308_DAC_BUF:
+ case RT1308_SDW_REG_RDATA:
+ case RT1308_DC_CAL_1:
+ case RT1308_PVDD_OFFSET_CTL:
+ case RT1308_CAL_OFFSET_DAC_PBTL:
+ case RT1308_CAL_OFFSET_DAC_L:
+ case RT1308_CAL_OFFSET_DAC_R:
+ case RT1308_CAL_OFFSET_PWM_L:
+ case RT1308_CAL_OFFSET_PWM_R:
+ case RT1308_CAL_PWM_VOS_ADC_L:
+ case RT1308_CAL_PWM_VOS_ADC_R:
+ case RT1308_MBIAS:
+ case RT1308_POWER_STATUS:
+ case RT1308_POWER_INT:
+ case RT1308_SINE_TONE_GEN_2:
+ case RT1308_BQ_SET:
+ case RT1308_BQ_PARA_UPDATE:
+ case RT1308_VEN_DEV_ID:
+ case RT1308_VERSION_ID:
+ case RT1308_EFUSE_1:
+ case RT1308_EFUSE_READ_PVDD_L:
+ case RT1308_EFUSE_READ_PVDD_R:
+ case RT1308_EFUSE_READ_PVDD_PTBL:
+ case RT1308_EFUSE_READ_DEV:
+ case RT1308_EFUSE_READ_R0:
+ case RT1308_EFUSE_READ_ADC_L:
+ case RT1308_EFUSE_READ_ADC_R:
+ case RT1308_EFUSE_READ_ADC_PBTL:
+ case RT1308_EFUSE_RESERVE:
+ case RT1308_EFUSE_DATA_0_MSB:
+ case RT1308_EFUSE_DATA_0_LSB:
+ case RT1308_EFUSE_DATA_1_MSB:
+ case RT1308_EFUSE_DATA_1_LSB:
+ case RT1308_EFUSE_DATA_2_MSB:
+ case RT1308_EFUSE_DATA_2_LSB:
+ case RT1308_EFUSE_DATA_3_MSB:
+ case RT1308_EFUSE_DATA_3_LSB:
+ case RT1308_EFUSE_STATUS_1:
+ case RT1308_EFUSE_STATUS_2:
+ case RT1308_DUMMY_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool rt1308_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RT1308_RESET:
+ case RT1308_RESET_N:
+ case RT1308_CLK_GATING ... RT1308_DC_DET_THRES:
+ case RT1308_DAC_SET ... RT1308_AD_FILTER_SET:
+ case RT1308_DC_CAL_1 ... RT1308_POWER_INT:
+ case RT1308_SINE_TONE_GEN_1:
+ case RT1308_SINE_TONE_GEN_2:
+ case RT1308_BQ_SET:
+ case RT1308_BQ_PARA_UPDATE:
+ case RT1308_BQ_PRE_VOL_L ... RT1308_BQ_POST_VOL_R:
+ case RT1308_BQ1_L_H0 ... RT1308_BQ2_R_A2:
+ case RT1308_VEN_DEV_ID:
+ case RT1308_VERSION_ID:
+ case RT1308_SPK_BOUND:
+ case RT1308_BQ1_EQ_L_1 ... RT1308_BQ2_EQ_R_3:
+ case RT1308_EFUSE_1 ... RT1308_EFUSE_RESERVE:
+ case RT1308_PADS_1:
+ case RT1308_PADS_2:
+ case RT1308_TEST_MODE:
+ case RT1308_TEST_1:
+ case RT1308_TEST_2:
+ case RT1308_TEST_3:
+ case RT1308_TEST_4:
+ case RT1308_EFUSE_DATA_0_MSB ... RT1308_EFUSE_STATUS_2:
+ case RT1308_TCON_1:
+ case RT1308_TCON_2:
+ case RT1308_DUMMY_REG:
+ case RT1308_MAX_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int rt1308_classd_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ msleep(30);
+ snd_soc_component_update_bits(component, RT1308_POWER_STATUS,
+ RT1308_POW_PDB_REG_BIT, RT1308_POW_PDB_REG_BIT);
+ msleep(40);
+ break;
+ case SND_SOC_DAPM_PRE_PMD:
+ snd_soc_component_update_bits(component, RT1308_POWER_STATUS,
+ RT1308_POW_PDB_REG_BIT, 0);
+ usleep_range(150000, 200000);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static const char * const rt1308_rx_data_ch_select[] = {
+ "LR",
+ "LL",
+ "RL",
+ "RR",
+};
+
+static SOC_ENUM_SINGLE_DECL(rt1308_rx_data_ch_enum, RT1308_DATA_PATH, 24,
+ rt1308_rx_data_ch_select);
+
+static const struct snd_kcontrol_new rt1308_snd_controls[] = {
+
+ /* I2S Data Channel Selection */
+ SOC_ENUM("RX Channel Select", rt1308_rx_data_ch_enum),
+};
+
+static const struct snd_kcontrol_new rt1308_sto_dac_l =
+ SOC_DAPM_SINGLE("Switch", RT1308_DAC_SET,
+ RT1308_DVOL_MUTE_L_EN_SFT, 1, 1);
+
+static const struct snd_kcontrol_new rt1308_sto_dac_r =
+ SOC_DAPM_SINGLE("Switch", RT1308_DAC_SET,
+ RT1308_DVOL_MUTE_R_EN_SFT, 1, 1);
+
+static const struct snd_soc_dapm_widget rt1308_dapm_widgets[] = {
+ /* Audio Interface */
+ SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
+
+ /* Supply Widgets */
+ SND_SOC_DAPM_SUPPLY("MBIAS20U", RT1308_POWER,
+ RT1308_POW_MBIAS20U_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("ALDO", RT1308_POWER,
+ RT1308_POW_ALDO_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("DBG", RT1308_POWER,
+ RT1308_POW_DBG_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("DACL", RT1308_POWER,
+ RT1308_POW_DACL_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("CLK25M", RT1308_POWER,
+ RT1308_POW_CLK25M_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("ADC_R", RT1308_POWER,
+ RT1308_POW_ADC_R_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("ADC_L", RT1308_POWER,
+ RT1308_POW_ADC_L_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("DLDO", RT1308_POWER,
+ RT1308_POW_DLDO_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("VREF", RT1308_POWER,
+ RT1308_POW_VREF_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MIXER_R", RT1308_POWER,
+ RT1308_POW_MIXER_R_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MIXER_L", RT1308_POWER,
+ RT1308_POW_MIXER_L_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MBIAS4U", RT1308_POWER,
+ RT1308_POW_MBIAS4U_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("PLL2_LDO", RT1308_POWER,
+ RT1308_POW_PLL2_LDO_EN_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("PLL2B", RT1308_POWER,
+ RT1308_POW_PLL2B_EN_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("PLL2F", RT1308_POWER,
+ RT1308_POW_PLL2F_EN_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("PLL2F2", RT1308_POWER,
+ RT1308_POW_PLL2F2_EN_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("PLL2B2", RT1308_POWER,
+ RT1308_POW_PLL2B2_EN_BIT, 0, NULL, 0),
+
+ /* Digital Interface */
+ SND_SOC_DAPM_SUPPLY("DAC Power", RT1308_POWER,
+ RT1308_POW_DAC1_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SWITCH("DAC L", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_l),
+ SND_SOC_DAPM_SWITCH("DAC R", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_r),
+
+ /* Output Lines */
+ SND_SOC_DAPM_PGA_E("CLASS D", SND_SOC_NOPM, 0, 0, NULL, 0,
+ rt1308_classd_event,
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
+ SND_SOC_DAPM_OUTPUT("SPOL"),
+ SND_SOC_DAPM_OUTPUT("SPOR"),
+};
+
+static const struct snd_soc_dapm_route rt1308_dapm_routes[] = {
+
+ { "DAC", NULL, "AIF1RX" },
+
+ { "DAC", NULL, "MBIAS20U" },
+ { "DAC", NULL, "ALDO" },
+ { "DAC", NULL, "DBG" },
+ { "DAC", NULL, "DACL" },
+ { "DAC", NULL, "CLK25M" },
+ { "DAC", NULL, "ADC_R" },
+ { "DAC", NULL, "ADC_L" },
+ { "DAC", NULL, "DLDO" },
+ { "DAC", NULL, "VREF" },
+ { "DAC", NULL, "MIXER_R" },
+ { "DAC", NULL, "MIXER_L" },
+ { "DAC", NULL, "MBIAS4U" },
+ { "DAC", NULL, "PLL2_LDO" },
+ { "DAC", NULL, "PLL2B" },
+ { "DAC", NULL, "PLL2F" },
+ { "DAC", NULL, "PLL2F2" },
+ { "DAC", NULL, "PLL2B2" },
+
+ { "DAC L", "Switch", "DAC" },
+ { "DAC R", "Switch", "DAC" },
+ { "DAC L", NULL, "DAC Power" },
+ { "DAC R", NULL, "DAC Power" },
+
+ { "CLASS D", NULL, "DAC L" },
+ { "CLASS D", NULL, "DAC R" },
+ { "SPOL", NULL, "CLASS D" },
+ { "SPOR", NULL, "CLASS D" },
+};
+
+static int rt1308_get_clk_info(int sclk, int rate)
+{
+ int i, pd[] = {1, 2, 3, 4, 6, 8, 12, 16};
+
+ if (sclk <= 0 || rate <= 0)
+ return -EINVAL;
+
+ rate = rate << 8;
+ for (i = 0; i < ARRAY_SIZE(pd); i++)
+ if (sclk == rate * pd[i])
+ return i;
+
+ return -EINVAL;
+}
+
+static int rt1308_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+ unsigned int val_len = 0, val_clk, mask_clk;
+ int pre_div, bclk_ms, frame_size;
+
+ rt1308->lrck = params_rate(params);
+ pre_div = rt1308_get_clk_info(rt1308->sysclk, rt1308->lrck);
+ if (pre_div < 0) {
+ dev_err(component->dev,
+ "Unsupported clock setting %d\n", rt1308->lrck);
+ return -EINVAL;
+ }
+
+ frame_size = snd_soc_params_to_frame_size(params);
+ if (frame_size < 0) {
+ dev_err(component->dev, "Unsupported frame size: %d\n",
+ frame_size);
+ return -EINVAL;
+ }
+
+ bclk_ms = frame_size > 32;
+ rt1308->bclk = rt1308->lrck * (32 << bclk_ms);
+
+ dev_dbg(component->dev, "bclk_ms is %d and pre_div is %d for iis %d\n",
+ bclk_ms, pre_div, dai->id);
+
+ dev_dbg(component->dev, "lrck is %dHz and pre_div is %d for iis %d\n",
+ rt1308->lrck, pre_div, dai->id);
+
+ switch (params_width(params)) {
+ case 16:
+ val_len |= RT1308_I2S_DL_SEL_16B;
+ break;
+ case 20:
+ val_len |= RT1308_I2S_DL_SEL_20B;
+ break;
+ case 24:
+ val_len |= RT1308_I2S_DL_SEL_24B;
+ break;
+ case 8:
+ val_len |= RT1308_I2S_DL_SEL_8B;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (dai->id) {
+ case RT1308_AIF1:
+ mask_clk = RT1308_DIV_FS_SYS_MASK;
+ val_clk = pre_div << RT1308_DIV_FS_SYS_SFT;
+ snd_soc_component_update_bits(component,
+ RT1308_I2S_SET_2, RT1308_I2S_DL_SEL_MASK,
+ val_len);
+ break;
+ default:
+ dev_err(component->dev, "Invalid dai->id: %d\n", dai->id);
+ return -EINVAL;
+ }
+
+ snd_soc_component_update_bits(component, RT1308_CLK_1,
+ mask_clk, val_clk);
+
+ return 0;
+}
+
+static int rt1308_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_component *component = dai->component;
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+ unsigned int reg_val = 0, reg1_val = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ rt1308->master = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ reg_val |= RT1308_I2S_DF_SEL_LEFT;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ reg_val |= RT1308_I2S_DF_SEL_PCM_A;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ reg_val |= RT1308_I2S_DF_SEL_PCM_B;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ reg1_val |= RT1308_I2S_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (dai->id) {
+ case RT1308_AIF1:
+ snd_soc_component_update_bits(component,
+ RT1308_I2S_SET_1, RT1308_I2S_DF_SEL_MASK,
+ reg_val);
+ snd_soc_component_update_bits(component,
+ RT1308_I2S_SET_2, RT1308_I2S_BCLK_MASK,
+ reg1_val);
+ break;
+ default:
+ dev_err(component->dev, "Invalid dai->id: %d\n", dai->id);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int rt1308_set_component_sysclk(struct snd_soc_component *component,
+ int clk_id, int source, unsigned int freq, int dir)
+{
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+ unsigned int reg_val = 0;
+
+ if (freq == rt1308->sysclk && clk_id == rt1308->sysclk_src)
+ return 0;
+
+ switch (clk_id) {
+ case RT1308_FS_SYS_S_MCLK:
+ reg_val |= RT1308_SEL_FS_SYS_SRC_MCLK;
+ snd_soc_component_update_bits(component,
+ RT1308_CLK_DET, RT1308_MCLK_DET_EN_MASK,
+ RT1308_MCLK_DET_EN);
+ break;
+ case RT1308_FS_SYS_S_BCLK:
+ reg_val |= RT1308_SEL_FS_SYS_SRC_BCLK;
+ break;
+ case RT1308_FS_SYS_S_PLL:
+ reg_val |= RT1308_SEL_FS_SYS_SRC_PLL;
+ break;
+ case RT1308_FS_SYS_S_RCCLK:
+ reg_val |= RT1308_SEL_FS_SYS_SRC_RCCLK;
+ break;
+ default:
+ dev_err(component->dev, "Invalid clock id (%d)\n", clk_id);
+ return -EINVAL;
+ }
+ snd_soc_component_update_bits(component, RT1308_CLK_1,
+ RT1308_SEL_FS_SYS_MASK, reg_val);
+ rt1308->sysclk = freq;
+ rt1308->sysclk_src = clk_id;
+
+ dev_dbg(component->dev, "Sysclk is %dHz and clock id is %d\n",
+ freq, clk_id);
+
+ return 0;
+}
+
+static int rt1308_set_component_pll(struct snd_soc_component *component,
+ int pll_id, int source, unsigned int freq_in,
+ unsigned int freq_out)
+{
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+ struct rl6231_pll_code pll_code;
+ int ret;
+
+ if (source == rt1308->pll_src && freq_in == rt1308->pll_in &&
+ freq_out == rt1308->pll_out)
+ return 0;
+
+ if (!freq_in || !freq_out) {
+ dev_dbg(component->dev, "PLL disabled\n");
+
+ rt1308->pll_in = 0;
+ rt1308->pll_out = 0;
+ snd_soc_component_update_bits(component,
+ RT1308_CLK_1, RT1308_SEL_FS_SYS_MASK,
+ RT1308_SEL_FS_SYS_SRC_MCLK);
+ return 0;
+ }
+
+ switch (source) {
+ case RT1308_PLL_S_MCLK:
+ snd_soc_component_update_bits(component,
+ RT1308_CLK_2, RT1308_SEL_PLL_SRC_MASK,
+ RT1308_SEL_PLL_SRC_MCLK);
+ snd_soc_component_update_bits(component,
+ RT1308_CLK_DET, RT1308_MCLK_DET_EN_MASK,
+ RT1308_MCLK_DET_EN);
+ break;
+ case RT1308_PLL_S_BCLK:
+ snd_soc_component_update_bits(component,
+ RT1308_CLK_2, RT1308_SEL_PLL_SRC_MASK,
+ RT1308_SEL_PLL_SRC_BCLK);
+ break;
+ case RT1308_PLL_S_RCCLK:
+ snd_soc_component_update_bits(component,
+ RT1308_CLK_2, RT1308_SEL_PLL_SRC_MASK,
+ RT1308_SEL_PLL_SRC_RCCLK);
+ freq_in = 25000000;
+ break;
+ default:
+ dev_err(component->dev, "Unknown PLL Source %d\n", source);
+ return -EINVAL;
+ }
+
+ ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
+ if (ret < 0) {
+ dev_err(component->dev, "Unsupport input clock %d\n", freq_in);
+ return ret;
+ }
+
+ dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
+ pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
+ pll_code.n_code, pll_code.k_code);
+
+ snd_soc_component_write(component, RT1308_PLL_1,
+ pll_code.k_code << RT1308_PLL1_K_SFT |
+ pll_code.m_bp << RT1308_PLL1_M_BYPASS_SFT |
+ (pll_code.m_bp ? 0 : pll_code.m_code) << RT1308_PLL1_M_SFT |
+ pll_code.n_code << RT1308_PLL1_N_SFT);
+
+ rt1308->pll_in = freq_in;
+ rt1308->pll_out = freq_out;
+ rt1308->pll_src = source;
+
+ return 0;
+}
+
+static int rt1308_probe(struct snd_soc_component *component)
+{
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+
+ rt1308->component = component;
+
+ return rt1308_reg_init(component);
+}
+
+static void rt1308_remove(struct snd_soc_component *component)
+{
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+
+ regmap_write(rt1308->regmap, RT1308_RESET, 0);
+}
+
+#ifdef CONFIG_PM
+static int rt1308_suspend(struct snd_soc_component *component)
+{
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+
+ regcache_cache_only(rt1308->regmap, true);
+ regcache_mark_dirty(rt1308->regmap);
+
+ return 0;
+}
+
+static int rt1308_resume(struct snd_soc_component *component)
+{
+ struct rt1308_priv *rt1308 = snd_soc_component_get_drvdata(component);
+
+ regcache_cache_only(rt1308->regmap, false);
+ regcache_sync(rt1308->regmap);
+
+ return 0;
+}
+#else
+#define rt1308_suspend NULL
+#define rt1308_resume NULL
+#endif
+
+#define RT1308_STEREO_RATES SNDRV_PCM_RATE_48000
+#define RT1308_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static const struct snd_soc_dai_ops rt1308_aif_dai_ops = {
+ .hw_params = rt1308_hw_params,
+ .set_fmt = rt1308_set_dai_fmt,
+};
+
+static struct snd_soc_dai_driver rt1308_dai[] = {
+ {
+ .name = "rt1308-aif",
+ .playback = {
+ .stream_name = "AIF1 Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = RT1308_STEREO_RATES,
+ .formats = RT1308_FORMATS,
+ },
+ .ops = &rt1308_aif_dai_ops,
+ },
+};
+
+static const struct snd_soc_component_driver soc_component_dev_rt1308 = {
+ .probe = rt1308_probe,
+ .remove = rt1308_remove,
+ .suspend = rt1308_suspend,
+ .resume = rt1308_resume,
+ .controls = rt1308_snd_controls,
+ .num_controls = ARRAY_SIZE(rt1308_snd_controls),
+ .dapm_widgets = rt1308_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(rt1308_dapm_widgets),
+ .dapm_routes = rt1308_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(rt1308_dapm_routes),
+ .set_sysclk = rt1308_set_component_sysclk,
+ .set_pll = rt1308_set_component_pll,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
+};
+
+static const struct regmap_config rt1308_regmap = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .max_register = RT1308_MAX_REG,
+ .volatile_reg = rt1308_volatile_register,
+ .readable_reg = rt1308_readable_register,
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults = rt1308_reg,
+ .num_reg_defaults = ARRAY_SIZE(rt1308_reg),
+ .use_single_read = true,
+ .use_single_write = true,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id rt1308_of_match[] = {
+ { .compatible = "realtek,rt1308", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rt1308_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static struct acpi_device_id rt1308_acpi_match[] = {
+ { "10EC1308", 0, },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, rt1308_acpi_match);
+#endif
+
+static const struct i2c_device_id rt1308_i2c_id[] = {
+ { "rt1308", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rt1308_i2c_id);
+
+static void rt1308_efuse(struct rt1308_priv *rt1308)
+{
+ regmap_write(rt1308->regmap, RT1308_RESET, 0);
+
+ regmap_write(rt1308->regmap, RT1308_POWER, 0xff371600);
+ regmap_write(rt1308->regmap, RT1308_CLK_1, 0x52100000);
+ regmap_write(rt1308->regmap, RT1308_I2C_I2S_SDW_SET, 0x01014005);
+ regmap_write(rt1308->regmap, RT1308_CLASS_D_SET_2, 0x227f5501);
+ regmap_write(rt1308->regmap, RT1308_PADS_1, 0x50150505);
+ regmap_write(rt1308->regmap, RT1308_VREF, 0x18100000);
+ regmap_write(rt1308->regmap, RT1308_IV_SENSE, 0x87010000);
+ regmap_write(rt1308->regmap, RT1308_DUMMY_REG, 0x00000200);
+ regmap_write(rt1308->regmap, RT1308_SIL_DET, 0x61c30000);
+ regmap_write(rt1308->regmap, RT1308_CLK_DET, 0x03700000);
+ regmap_write(rt1308->regmap, RT1308_SINE_TONE_GEN_1, 0x50022f00);
+ regmap_write(rt1308->regmap, RT1308_POWER_STATUS, 0x01800000);
+ regmap_write(rt1308->regmap, RT1308_DC_CAL_2, 0x00ffff00);
+ regmap_write(rt1308->regmap, RT1308_CLASS_D_SET_2, 0x607e5501);
+
+ regmap_write(rt1308->regmap, RT1308_CLK_2, 0x0060e000);
+ regmap_write(rt1308->regmap, RT1308_EFUSE_1, 0x04fe0f00);
+ msleep(100);
+ regmap_write(rt1308->regmap, RT1308_EFUSE_1, 0x44fe0f00);
+ msleep(20);
+ regmap_write(rt1308->regmap, RT1308_PVDD_OFFSET_CTL, 0x10000000);
+
+ regmap_write(rt1308->regmap, RT1308_POWER_STATUS, 0x00800000);
+ regmap_write(rt1308->regmap, RT1308_POWER, 0x0);
+ regmap_write(rt1308->regmap, RT1308_CLK_1, 0x52000000);
+ regmap_write(rt1308->regmap, RT1308_CLASS_D_SET_2, 0x227f5501);
+ regmap_write(rt1308->regmap, RT1308_SINE_TONE_GEN_1, 0x10022f00);
+}
+
+static int rt1308_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct rt1308_priv *rt1308;
+ int ret;
+ unsigned int val;
+
+ rt1308 = devm_kzalloc(&i2c->dev, sizeof(struct rt1308_priv),
+ GFP_KERNEL);
+ if (rt1308 == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, rt1308);
+
+ rt1308->regmap = devm_regmap_init_i2c(i2c, &rt1308_regmap);
+ if (IS_ERR(rt1308->regmap)) {
+ ret = PTR_ERR(rt1308->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ regmap_read(rt1308->regmap, RT1308_VEN_DEV_ID, &val);
+ /* ignore last byte difference */
+ if ((val & 0xFFFFFF00) != RT1308_DEVICE_ID_NUM) {
+ dev_err(&i2c->dev,
+ "Device with ID register %x is not rt1308\n", val);
+ return -ENODEV;
+ }
+
+ rt1308_efuse(rt1308);
+
+ return devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_rt1308,
+ rt1308_dai, ARRAY_SIZE(rt1308_dai));
+}
+
+static void rt1308_i2c_shutdown(struct i2c_client *client)
+{
+ struct rt1308_priv *rt1308 = i2c_get_clientdata(client);
+
+ regmap_write(rt1308->regmap, RT1308_RESET, 0);
+}
+
+static struct i2c_driver rt1308_i2c_driver = {
+ .driver = {
+ .name = "rt1308",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rt1308_of_match),
+ .acpi_match_table = ACPI_PTR(rt1308_acpi_match),
+ },
+ .probe = rt1308_i2c_probe,
+ .shutdown = rt1308_i2c_shutdown,
+ .id_table = rt1308_i2c_id,
+};
+module_i2c_driver(rt1308_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC RT1308 amplifier driver");
+MODULE_AUTHOR("Derek Fang <derek.fang at realtek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/rt1308.h b/sound/soc/codecs/rt1308.h
new file mode 100755
index 000000000000..c330aae1d527
--- /dev/null
+++ b/sound/soc/codecs/rt1308.h
@@ -0,0 +1,291 @@
+/*
+ * RT1308.h -- RT1308 ALSA SoC amplifier component driver
+ *
+ * Copyright 2019 Realtek Semiconductor Corp.
+ * Author: Derek Fang <derek.fang at realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _RT1308_H_
+#define _RT1308_H_
+
+#define RT1308_DEVICE_ID_NUM 0x10ec1300
+
+#define RT1308_RESET 0x00
+#define RT1308_RESET_N 0x01
+#define RT1308_CLK_GATING 0x02
+#define RT1308_PLL_1 0x03
+#define RT1308_PLL_2 0x04
+#define RT1308_PLL_INT 0x05
+#define RT1308_CLK_1 0x06
+#define RT1308_DATA_PATH 0x07
+#define RT1308_CLK_2 0x08
+#define RT1308_SIL_DET 0x09
+#define RT1308_CLK_DET 0x0a
+#define RT1308_DC_DET 0x0b
+#define RT1308_DC_DET_THRES 0x0c
+#define RT1308_DAC_SET 0x10
+#define RT1308_SRC_SET 0x11
+#define RT1308_DAC_BUF 0x12
+#define RT1308_ADC_SET 0x13
+#define RT1308_ADC_SET_INT 0x14
+#define RT1308_I2S_SET_1 0x15
+#define RT1308_I2S_SET_2 0x16
+#define RT1308_I2C_I2S_SDW_SET 0x17
+#define RT1308_SDW_REG_RW 0x18
+#define RT1308_SDW_REG_RDATA 0x19
+#define RT1308_IV_SENSE 0x1a
+#define RT1308_I2S_TX_DAC_SET 0x1b
+#define RT1308_AD_FILTER_SET 0x1c
+#define RT1308_DC_CAL_1 0x20
+#define RT1308_DC_CAL_2 0x21
+#define RT1308_DC_CAL_L_OFFSET 0x22
+#define RT1308_DC_CAL_R_OFFSET 0x23
+#define RT1308_PVDD_OFFSET_CTL 0x24
+#define RT1308_PVDD_OFFSET_L 0x25
+#define RT1308_PVDD_OFFSET_R 0x26
+#define RT1308_PVDD_OFFSET_PBTL 0x27
+#define RT1308_PVDD_OFFSET_PVDD 0x28
+#define RT1308_CAL_OFFSET_DAC_PBTL 0x29
+#define RT1308_CAL_OFFSET_DAC_L 0x2a
+#define RT1308_CAL_OFFSET_DAC_R 0x2b
+#define RT1308_CAL_OFFSET_PWM_L 0x2c
+#define RT1308_CAL_OFFSET_PWM_R 0x2d
+#define RT1308_CAL_PWM_VOS_ADC_L 0x2e
+#define RT1308_CAL_PWM_VOS_ADC_R 0x2f
+#define RT1308_CLASS_D_SET_1 0x30
+#define RT1308_CLASS_D_SET_2 0x31
+#define RT1308_POWER 0x32
+#define RT1308_LDO 0x33
+#define RT1308_VREF 0x34
+#define RT1308_MBIAS 0x35
+#define RT1308_POWER_STATUS 0x36
+#define RT1308_POWER_INT 0x37
+#define RT1308_SINE_TONE_GEN_1 0x50
+#define RT1308_SINE_TONE_GEN_2 0x51
+#define RT1308_BQ_SET 0x54
+#define RT1308_BQ_PARA_UPDATE 0x55
+#define RT1308_BQ_PRE_VOL_L 0x56
+#define RT1308_BQ_PRE_VOL_R 0x57
+#define RT1308_BQ_POST_VOL_L 0x58
+#define RT1308_BQ_POST_VOL_R 0x59
+#define RT1308_BQ1_L_H0 0x5b
+#define RT1308_BQ1_L_B1 0x5c
+#define RT1308_BQ1_L_B2 0x5d
+#define RT1308_BQ1_L_A1 0x5e
+#define RT1308_BQ1_L_A2 0x5f
+#define RT1308_BQ1_R_H0 0x60
+#define RT1308_BQ1_R_B1 0x61
+#define RT1308_BQ1_R_B2 0x62
+#define RT1308_BQ1_R_A1 0x63
+#define RT1308_BQ1_R_A2 0x64
+#define RT1308_BQ2_L_H0 0x65
+#define RT1308_BQ2_L_B1 0x66
+#define RT1308_BQ2_L_B2 0x67
+#define RT1308_BQ2_L_A1 0x68
+#define RT1308_BQ2_L_A2 0x69
+#define RT1308_BQ2_R_H0 0x6a
+#define RT1308_BQ2_R_B1 0x6b
+#define RT1308_BQ2_R_B2 0x6c
+#define RT1308_BQ2_R_A1 0x6d
+#define RT1308_BQ2_R_A2 0x6e
+#define RT1308_VEN_DEV_ID 0x70
+#define RT1308_VERSION_ID 0x71
+#define RT1308_SPK_BOUND 0x72
+#define RT1308_BQ1_EQ_L_1 0x73
+#define RT1308_BQ1_EQ_L_2 0x74
+#define RT1308_BQ1_EQ_L_3 0x75
+#define RT1308_BQ1_EQ_R_1 0x76
+#define RT1308_BQ1_EQ_R_2 0x77
+#define RT1308_BQ1_EQ_R_3 0x78
+#define RT1308_BQ2_EQ_L_1 0x79
+#define RT1308_BQ2_EQ_L_2 0x7a
+#define RT1308_BQ2_EQ_L_3 0x7b
+#define RT1308_BQ2_EQ_R_1 0x7c
+#define RT1308_BQ2_EQ_R_2 0x7d
+#define RT1308_BQ2_EQ_R_3 0x7e
+#define RT1308_EFUSE_1 0x7f
+#define RT1308_EFUSE_2 0x80
+#define RT1308_EFUSE_PROG_PVDD_L 0x81
+#define RT1308_EFUSE_PROG_PVDD_R 0x82
+#define RT1308_EFUSE_PROG_R0_L 0x83
+#define RT1308_EFUSE_PROG_R0_R 0x84
+#define RT1308_EFUSE_PROG_DEV 0x85
+#define RT1308_EFUSE_READ_PVDD_L 0x86
+#define RT1308_EFUSE_READ_PVDD_R 0x87
+#define RT1308_EFUSE_READ_PVDD_PTBL 0x88
+#define RT1308_EFUSE_READ_DEV 0x89
+#define RT1308_EFUSE_READ_R0 0x8a
+#define RT1308_EFUSE_READ_ADC_L 0x8b
+#define RT1308_EFUSE_READ_ADC_R 0x8c
+#define RT1308_EFUSE_READ_ADC_PBTL 0x8d
+#define RT1308_EFUSE_RESERVE 0x8e
+#define RT1308_PADS_1 0x90
+#define RT1308_PADS_2 0x91
+#define RT1308_TEST_MODE 0xa0
+#define RT1308_TEST_1 0xa1
+#define RT1308_TEST_2 0xa2
+#define RT1308_TEST_3 0xa3
+#define RT1308_TEST_4 0xa4
+#define RT1308_EFUSE_DATA_0_MSB 0xb0
+#define RT1308_EFUSE_DATA_0_LSB 0xb1
+#define RT1308_EFUSE_DATA_1_MSB 0xb2
+#define RT1308_EFUSE_DATA_1_LSB 0xb3
+#define RT1308_EFUSE_DATA_2_MSB 0xb4
+#define RT1308_EFUSE_DATA_2_LSB 0xb5
+#define RT1308_EFUSE_DATA_3_MSB 0xb6
+#define RT1308_EFUSE_DATA_3_LSB 0xb7
+#define RT1308_EFUSE_DATA_TEST_MSB 0xb8
+#define RT1308_EFUSE_DATA_TEST_LSB 0xb9
+#define RT1308_EFUSE_STATUS_1 0xba
+#define RT1308_EFUSE_STATUS_2 0xbb
+#define RT1308_TCON_1 0xc0
+#define RT1308_TCON_2 0xc1
+#define RT1308_DUMMY_REG 0xf0
+#define RT1308_MAX_REG 0xff
+
+/* PLL1 M/N/K Code-1 (0x03) */
+#define RT1308_PLL1_K_SFT 24
+#define RT1308_PLL1_K_MASK (0x1f << 24)
+#define RT1308_PLL1_M_BYPASS_MASK (0x1 << 23)
+#define RT1308_PLL1_M_BYPASS_SFT 23
+#define RT1308_PLL1_M_BYPASS (0x1 << 23)
+#define RT1308_PLL1_M_MASK (0x3f << 16)
+#define RT1308_PLL1_M_SFT 16
+#define RT1308_PLL1_N_MASK (0x7f << 8)
+#define RT1308_PLL1_N_SFT 8
+
+/* CLOCK-1 (0x06) */
+#define RT1308_DIV_FS_SYS_MASK (0xf << 28)
+#define RT1308_DIV_FS_SYS_SFT 28
+#define RT1308_SEL_FS_SYS_MASK (0x7 << 24)
+#define RT1308_SEL_FS_SYS_SFT 24
+#define RT1308_SEL_FS_SYS_SRC_MCLK (0x0 << 24)
+#define RT1308_SEL_FS_SYS_SRC_BCLK (0x1 << 24)
+#define RT1308_SEL_FS_SYS_SRC_PLL (0x2 << 24)
+#define RT1308_SEL_FS_SYS_SRC_RCCLK (0x4 << 24)
+
+/* CLOCK-2 (0x08) */
+#define RT1308_DIV_PRE_PLL_MASK (0xf << 28)
+#define RT1308_DIV_PRE_PLL_SFT 28
+#define RT1308_SEL_PLL_SRC_MASK (0x7 << 24)
+#define RT1308_SEL_PLL_SRC_SFT 24
+#define RT1308_SEL_PLL_SRC_MCLK (0x0 << 24)
+#define RT1308_SEL_PLL_SRC_BCLK (0x1 << 24)
+#define RT1308_SEL_PLL_SRC_RCCLK (0x4 << 24)
+
+/* Clock Detect (0x0a) */
+#define RT1308_MCLK_DET_EN_MASK (0x1 << 25)
+#define RT1308_MCLK_DET_EN_SFT 25
+#define RT1308_MCLK_DET_EN (0x1 << 25)
+#define RT1308_BCLK_DET_EN_MASK (0x1 << 24)
+#define RT1308_BCLK_DET_EN_SFT 24
+#define RT1308_BCLK_DET_EN (0x1 << 24)
+
+/* DAC Setting (0x10) */
+#define RT1308_DVOL_MUTE_R_EN_SFT 7
+#define RT1308_DVOL_MUTE_L_EN_SFT 6
+
+/* I2S Setting-1 (0x15) */
+#define RT1308_I2S_DF_SEL_MASK (0x3 << 12)
+#define RT1308_I2S_DF_SEL_SFT 12
+#define RT1308_I2S_DF_SEL_I2S (0x0 << 12)
+#define RT1308_I2S_DF_SEL_LEFT (0x1 << 12)
+#define RT1308_I2S_DF_SEL_PCM_A (0x2 << 12)
+#define RT1308_I2S_DF_SEL_PCM_B (0x3 << 12)
+#define RT1308_I2S_DL_RX_SEL_MASK (0x7 << 4)
+#define RT1308_I2S_DL_RX_SEL_SFT 4
+#define RT1308_I2S_DL_RX_SEL_16B (0x0 << 4)
+#define RT1308_I2S_DL_RX_SEL_20B (0x1 << 4)
+#define RT1308_I2S_DL_RX_SEL_24B (0x2 << 4)
+#define RT1308_I2S_DL_RX_SEL_32B (0x3 << 4)
+#define RT1308_I2S_DL_RX_SEL_8B (0x4 << 4)
+#define RT1308_I2S_DL_TX_SEL_MASK (0x7 << 0)
+#define RT1308_I2S_DL_TX_SEL_SFT 0
+#define RT1308_I2S_DL_TX_SEL_16B (0x0 << 0)
+#define RT1308_I2S_DL_TX_SEL_20B (0x1 << 0)
+#define RT1308_I2S_DL_TX_SEL_24B (0x2 << 0)
+#define RT1308_I2S_DL_TX_SEL_32B (0x3 << 0)
+#define RT1308_I2S_DL_TX_SEL_8B (0x4 << 0)
+
+/* I2S Setting-2 (0x16) */
+#define RT1308_I2S_DL_SEL_MASK (0x7 << 24)
+#define RT1308_I2S_DL_SEL_SFT 24
+#define RT1308_I2S_DL_SEL_16B (0x0 << 24)
+#define RT1308_I2S_DL_SEL_20B (0x1 << 24)
+#define RT1308_I2S_DL_SEL_24B (0x2 << 24)
+#define RT1308_I2S_DL_SEL_32B (0x3 << 24)
+#define RT1308_I2S_DL_SEL_8B (0x4 << 24)
+#define RT1308_I2S_BCLK_MASK (0x1 << 14)
+#define RT1308_I2S_BCLK_SFT 14
+#define RT1308_I2S_BCLK_NORMAL (0x0 << 14)
+#define RT1308_I2S_BCLK_INV (0x1 << 14)
+
+/* Power Control-1 (0x32) */
+#define RT1308_POW_MBIAS20U (0x1 << 31)
+#define RT1308_POW_MBIAS20U_BIT 31
+#define RT1308_POW_ALDO (0x1 << 30)
+#define RT1308_POW_ALDO_BIT 30
+#define RT1308_POW_DBG (0x1 << 29)
+#define RT1308_POW_DBG_BIT 29
+#define RT1308_POW_DACL (0x1 << 28)
+#define RT1308_POW_DACL_BIT 28
+#define RT1308_POW_DAC1 (0x1 << 27)
+#define RT1308_POW_DAC1_BIT 27
+#define RT1308_POW_CLK25M (0x1 << 26)
+#define RT1308_POW_CLK25M_BIT 26
+#define RT1308_POW_ADC_R (0x1 << 25)
+#define RT1308_POW_ADC_R_BIT 25
+#define RT1308_POW_ADC_L (0x1 << 24)
+#define RT1308_POW_ADC_L_BIT 24
+#define RT1308_POW_DLDO (0x1 << 21)
+#define RT1308_POW_DLDO_BIT 21
+#define RT1308_POW_VREF (0x1 << 20)
+#define RT1308_POW_VREF_BIT 20
+#define RT1308_POW_MIXER_R (0x1 << 18)
+#define RT1308_POW_MIXER_R_BIT 18
+#define RT1308_POW_MIXER_L (0x1 << 17)
+#define RT1308_POW_MIXER_L_BIT 17
+#define RT1308_POW_MBIAS4U (0x1 << 16)
+#define RT1308_POW_MBIAS4U_BIT 16
+#define RT1308_POW_PLL2_LDO_EN (0x1 << 12)
+#define RT1308_POW_PLL2_LDO_EN_BIT 12
+#define RT1308_POW_PLL2B_EN (0x1 << 11)
+#define RT1308_POW_PLL2B_EN_BIT 11
+#define RT1308_POW_PLL2F_EN (0x1 << 10)
+#define RT1308_POW_PLL2F_EN_BIT 10
+#define RT1308_POW_PLL2F2_EN (0x1 << 9)
+#define RT1308_POW_PLL2F2_EN_BIT 9
+#define RT1308_POW_PLL2B2_EN (0x1 << 8)
+#define RT1308_POW_PLL2B2_EN_BIT 8
+
+/* Power Control-2 (0x36) */
+#define RT1308_POW_PDB_SRC_BIT (0x1 << 27)
+#define RT1308_POW_PDB_MN_BIT (0x1 << 25)
+#define RT1308_POW_PDB_REG_BIT (0x1 << 24)
+
+
+/* System Clock Source */
+enum {
+ RT1308_FS_SYS_S_MCLK,
+ RT1308_FS_SYS_S_BCLK,
+ RT1308_FS_SYS_S_PLL,
+ RT1308_FS_SYS_S_RCCLK, /* 25.0 MHz */
+};
+
+/* PLL Source */
+enum {
+ RT1308_PLL_S_MCLK,
+ RT1308_PLL_S_BCLK,
+ RT1308_PLL_S_RCCLK,
+};
+
+enum {
+ RT1308_AIF1,
+ RT1308_AIFS
+};
+
+#endif /* end of _RT1308_H_ */
--
2.20.1
More information about the Alsa-devel
mailing list