[alsa-devel] [PATCH] ASoC: Intel: Skylake: Recover BXT FW on DSP boot timeout error
Pawel Harlozinski
pawel.harlozinski at linux.intel.com
Wed Jun 26 11:38:51 CEST 2019
When DSP boots with timeout error, reinitialize, transfer
and boot firmware to recover audio.
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek at intel.com>
---
sound/soc/intel/skylake/bxt-sst.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c
index 440bca7afbf1..a2844bdca1b8 100644
--- a/sound/soc/intel/skylake/bxt-sst.c
+++ b/sound/soc/intel/skylake/bxt-sst.c
@@ -455,13 +455,18 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
/* If core 1 was turned on for booting core 0, turn it off */
skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1));
if (ret == 0) {
- dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__);
- dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
+ dev_warn(ctx->dev,
+ "DSP boot timeout: Error code=0x%x: FW status=0x%x\n",
sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
- dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
- ret = -EIO;
- goto err;
+
+ ret = bxt_sst_init_fw(skl->dev, skl);
+ dev_warn(ctx->dev, "Reload fw status: %d\n", ret);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
+ ret = -EIO;
+ goto err;
+ }
}
}
--
2.17.1
More information about the Alsa-devel
mailing list