[alsa-devel] [PATCH v7 1/4] ASoC: rt5677: fall back to DT prop names on error

[Fletcher Woodruff]

The rt5677 driver uses ACPI-style property names to read from the
device API. However, these do not match the property names in _DSD
used on the Chromebook Pixel 2015, which are closer to the Device Tree
style.  Unify the two functions for reading from the device API so that
they try ACPI-style names first and fall back to the DT names on error.

With this patch, plugging and unplugging the headphone jack switches
between headphones and speakers automatically.

Signed-off-by: Fletcher Woodruff <fletcherw at chromium.org>
---
 sound/soc/codecs/rt5677.c | 74 +++++++++++++++++++--------------------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index c49b5c21866663..fe000f30b9ad5f 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -5020,48 +5020,50 @@ static const struct acpi_device_id rt5677_acpi_match[] = {
 };
 MODULE_DEVICE_TABLE(acpi, rt5677_acpi_match);
 
-static void rt5677_read_acpi_properties(struct rt5677_priv *rt5677,
+static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
 		struct device *dev)
 {
 	u32 val;
 
-	if (!device_property_read_u32(dev, "DCLK", &val))
-		rt5677->pdata.dmic2_clk_pin = val;
+	rt5677->pdata.in1_diff =
+		device_property_read_bool(dev, "IN1") ||
+		device_property_read_bool(dev, "realtek,in1-differential");
 
-	rt5677->pdata.in1_diff = device_property_read_bool(dev, "IN1");
-	rt5677->pdata.in2_diff = device_property_read_bool(dev, "IN2");
-	rt5677->pdata.lout1_diff = device_property_read_bool(dev, "OUT1");
-	rt5677->pdata.lout2_diff = device_property_read_bool(dev, "OUT2");
-	rt5677->pdata.lout3_diff = device_property_read_bool(dev, "OUT3");
+	rt5677->pdata.in2_diff =
+		device_property_read_bool(dev, "IN2") ||
+		device_property_read_bool(dev, "realtek,in2-differential");
 
-	device_property_read_u32(dev, "JD1", &rt5677->pdata.jd1_gpio);
-	device_property_read_u32(dev, "JD2", &rt5677->pdata.jd2_gpio);
-	device_property_read_u32(dev, "JD3", &rt5677->pdata.jd3_gpio);
-}
+	rt5677->pdata.lout1_diff =
+		device_property_read_bool(dev, "OUT1") ||
+		device_property_read_bool(dev, "realtek,lout1-differential");
 
-static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
-		struct device *dev)
-{
-	rt5677->pdata.in1_diff = device_property_read_bool(dev,
-			"realtek,in1-differential");
-	rt5677->pdata.in2_diff = device_property_read_bool(dev,
-			"realtek,in2-differential");
-	rt5677->pdata.lout1_diff = device_property_read_bool(dev,
-			"realtek,lout1-differential");
-	rt5677->pdata.lout2_diff = device_property_read_bool(dev,
-			"realtek,lout2-differential");
-	rt5677->pdata.lout3_diff = device_property_read_bool(dev,
-			"realtek,lout3-differential");
+	rt5677->pdata.lout2_diff =
+		device_property_read_bool(dev, "OUT2") ||
+		device_property_read_bool(dev, "realtek,lout2-differential");
+
+	rt5677->pdata.lout3_diff =
+		device_property_read_bool(dev, "OUT3") ||
+		device_property_read_bool(dev, "realtek,lout3-differential");
 
 	device_property_read_u8_array(dev, "realtek,gpio-config",
-			rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
-
-	device_property_read_u32(dev, "realtek,jd1-gpio",
-			&rt5677->pdata.jd1_gpio);
-	device_property_read_u32(dev, "realtek,jd2-gpio",
-			&rt5677->pdata.jd2_gpio);
-	device_property_read_u32(dev, "realtek,jd3-gpio",
-			&rt5677->pdata.jd3_gpio);
+				      rt5677->pdata.gpio_config,
+				      RT5677_GPIO_NUM);
+
+	if (!device_property_read_u32(dev, "DCLK", &val) ||
+	    !device_property_read_u32(dev, "realtek,dmic2_clk_pin", &val))
+		rt5677->pdata.dmic2_clk_pin = val;
+
+	if (!device_property_read_u32(dev, "JD1", &val) ||
+	    !device_property_read_u32(dev, "realtek,jd1-gpio", &val))
+		rt5677->pdata.jd1_gpio = val;
+
+	if (!device_property_read_u32(dev, "JD2", &val) ||
+	    !device_property_read_u32(dev, "realtek,jd2-gpio", &val))
+		rt5677->pdata.jd2_gpio = val;
+
+	if (!device_property_read_u32(dev, "JD3", &val) ||
+	    !device_property_read_u32(dev, "realtek,jd3-gpio", &val))
+		rt5677->pdata.jd3_gpio = val;
 }
 
 static struct regmap_irq rt5677_irqs[] = {
@@ -5144,20 +5146,18 @@ static int rt5677_i2c_probe(struct i2c_client *i2c)
 		match_id = of_match_device(rt5677_of_match, &i2c->dev);
 		if (match_id)
 			rt5677->type = (enum rt5677_type)match_id->data;
-
-		rt5677_read_device_properties(rt5677, &i2c->dev);
 	} else if (ACPI_HANDLE(&i2c->dev)) {
 		const struct acpi_device_id *acpi_id;
 
 		acpi_id = acpi_match_device(rt5677_acpi_match, &i2c->dev);
 		if (acpi_id)
 			rt5677->type = (enum rt5677_type)acpi_id->driver_data;
-
-		rt5677_read_acpi_properties(rt5677, &i2c->dev);
 	} else {
 		return -EINVAL;
 	}
 
+	rt5677_read_device_properties(rt5677, &i2c->dev);
+
 	/* pow-ldo2 and reset are optional. The codec pins may be statically
 	 * connected on the board without gpios. If the gpio device property
 	 * isn't specified, devm_gpiod_get_optional returns NULL.
-- 
2.22.0.410.gd8fdbe21b5-goog