[alsa-devel] [PATCH v1 4/6] ASoC: sgtl5000: Fix charge pump source assignment

[Marcel Ziswiler]

On Tue, 2019-05-21 at 13:36 +0300, Oleksandr Suvorov wrote:
> If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
> source can be assigned automatically.
> 
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>

Reviewed-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

> ---
> 
>  sound/soc/codecs/sgtl5000.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git sound/soc/codecs/sgtl5000.c sound/soc/codecs/sgtl5000.c
> index e813a37910af..ee1e4bf61322 100644
> --- sound/soc/codecs/sgtl5000.c
> +++ sound/soc/codecs/sgtl5000.c
> @@ -1174,12 +1174,16 @@ static int sgtl5000_set_power_regs(struct
> snd_soc_component *component)
>  					SGTL5000_INT_OSC_EN);
>  		/* Enable VDDC charge pump */
>  		ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
> -	} else if (vddio >= 3100 && vdda >= 3100) {
> +	} else {
>  		ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
> -		/* VDDC use VDDIO rail */
> -		lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
> -		lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
> -			    SGTL5000_VDDC_MAN_ASSN_SHIFT;
> +		/* if vddio == vdda the source of charge pump should be
> +		 * assigned manually to VDDIO
> +		 */
> +		if (vddio == vdda) {
> +			lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
> +			lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
> +				    SGTL5000_VDDC_MAN_ASSN_SHIFT;
> +		}
>  	}
>  
>  	snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL,
> lreg_ctrl);
> -- 
> 2.20.1