[alsa-devel] [RFC/RFT PATCH v2] ASoC: fsl_esai: Revert "ETDR and TX0~5 registers are non volatile"

[Nicolin Chen]

Hi Shengjiu,

On Thu, Jun 13, 2019 at 03:00:58AM +0000, S.j. Wang wrote:
> > Commit 8973112aa41b ("ASoC: fsl_esai: ETDR and TX0~5 registers are non
> > volatile") removed TX data registers from the volatile_reg list and appended
> > default values for them. However, being data registers of TX, they should
> > not have been removed from the list because they should not be cached --
> > see the following reason.
> > 
> > When doing regcache_sync(), this operation might accidentally write some
> > dirty data to these registers, in case that cached data happen to be
> > different from the default ones, which might also result in a channel shift or
> > swap situation, since the number of write-via-sync operations at ETDR
> > would very unlikely match the channel number.
> > 
> > So this patch reverts the original commit to keep TX data registers in
> > volatile_reg list in order to prevent them from being written by
> > regcache_sync().
> > 
> > Note: this revert is not a complete revert as it keeps those macros of
> > registers remaining in the default value list while the original commit also
> > changed other entries in the list. And this patch isn't very necessary to Cc
> > stable tree since there has been always a FIFO reset operation around the
> > regcache_sync() call, even prior to this reverted commit.
> > 
> > Signed-off-by: Nicolin Chen <nicoleotsuka at gmail.com>
> > Cc: Shengjiu Wang <shengjiu.wang at nxp.com>
> > ---
> > Hi Mark,
> > In case there's no objection against the patch, I'd still like to wait for a
> > Tested-by from NXP folks before submitting it. Thanks!
> 
> bool regmap_volatile(struct regmap *map, unsigned int reg)
> {
>         if (!map->format.format_write && !regmap_readable(map, reg))
>                 return false;
> 
> 
> Actually with this patch, the regcache_sync will write the 0 to ETDR, even
> It is declared volatile, the reason is that in regmap_volatile(), the first
> condition
> 
> (!map->format.format_write && !regmap_readable(map, reg))  is true.
> 
> So the regmap_volatile will return false.

Interesting finding.....so a write-only register will not be treated
as a volatile register (to avoid regcache_sync) at all....

> And in regcache_reg_needs_sync(), because there is no default value
> It will return true, then the ETDR need be synced, and be written 0.

Looks like either way of keeping them in or out of volatile_reg list
might have the same result of having a data being written, while our
current code at least would not force to write 0.

So I think having a FIFO reset won't be a bad idea at all. And since
our suspend/resume() functions are already doing regcache_sync() with
a FIFO reset, we can just reuse that code for your reset routine.

Thanks a lot
Nicolin