[alsa-devel] [PATCH v2] ASoC: Intel: Skylake: Recover BXT FW on DSP boot timeout error

[Pawel Harlozinski]

When DSP boots with timeout error try to reload firmware
to keep best user expeirience.

Signed-off-by: Szymon Mielczarek <szymonx.mielczarek at intel.com>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski at linux.intel.com>
---
 sound/soc/intel/skylake/bxt-sst.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c
index 440bca7afbf1..dd0260557530 100644
--- a/sound/soc/intel/skylake/bxt-sst.c
+++ b/sound/soc/intel/skylake/bxt-sst.c
@@ -455,13 +455,19 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
 	/* If core 1 was turned on for booting core 0, turn it off */
 		skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1));
 		if (ret == 0) {
-			dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__);
-			dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
+			dev_warn(ctx->dev,
+				"DSP boot timeout: Error code=0x%x: FW status=0x%x\n",
 				sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
 				sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
-			dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
-			ret = -EIO;
-			goto err;
+			dev_warn(ctx->dev,"Reloading FW\n");
+
+			ret = bxt_sst_init_fw(skl->dev, skl);
+			if (ret < 0) {
+				dev_err(ctx->dev, "Reload fw failed: %d\n", ret);
+				dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
+				ret = -EIO;
+				goto err;
+			}
 		}
 	}
 
@@ -486,7 +492,6 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
 	if (core_id == SKL_DSP_CORE0_ID)
 		core_mask |= SKL_DSP_CORE_MASK(1);
 	skl_dsp_disable_core(ctx, core_mask);
-
 	return ret;
 }
 
-- 
2.17.1