[alsa-devel] [PATCH 1/2] ASoC: codecs: ad193x: Group register initialization at probe

[Codrin.Ciubotariu at microchip.com]

On 03.07.2019 10:39, Tzung-Bi Shih wrote:
> On Thu, Jun 27, 2019 at 8:05 PM Codrin Ciubotariu
> <codrin.ciubotariu at microchip.com> wrote:
>> +struct ad193x_reg_default {
>> +       unsigned int reg;
>> +       unsigned int val;
>> +};
> You probably don't need to define this.  There is a struct
> reg_sequence in regmap.h.
> 
>> +
>> +/* codec register values to set after reset */
>> +static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
>> +{
>> +       const struct ad193x_reg_default reg_init[] = {
>> +               {  0, 0x99 },   /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
>> +               {  1, 0x04 },   /* PLL_CLK_CTRL1: no on-chip Vref */
>> +               {  2, 0x40 },   /* DAC_CTRL0: TDM mode */
>> +               {  4, 0x1A },   /* DAC_CTRL2: 48kHz de-emphasis, unmute dac */
>> +               {  5, 0x00 },   /* DAC_CHNL_MUTE: unmute DAC channels */
>> +       };
>> +       const struct ad193x_reg_default reg_adc_init[] = {
>> +               { 14, 0x03 },   /* ADC_CTRL0: high-pass filter enable */
>> +               { 15, 0x43 },   /* ADC_CTRL1: sata delay=1, adc aux mode */
>> +       };
>> +       int i;
>> +
>> +       for (i = 0; i < ARRAY_SIZE(reg_init); i++)
>> +               regmap_write(ad193x->regmap, reg_init[i].reg, reg_init[i].val);
>> +
>> +       if (ad193x_has_adc(ad193x)) {
>> +               for (i = 0; i < ARRAY_SIZE(reg_adc_init); i++) {
>> +                       regmap_write(ad193x->regmap, reg_adc_init[i].reg,
>> +                                    reg_adc_init[i].val);
>> +               }
>> +       }
> And you could use regmap_multi_reg_write( ) to substitute the two for-loops.
> 
> See https://mailman.alsa-project.org/pipermail/alsa-devel/2019-June/151090.html
> as an example.  It also has some reg initializations in component
> probe( ).
> 

Your solution is certainly more elegant. I will make a patch and switch 
to regmap_multi_reg_write().

Thank you for your review.

Best regards,
Codrin