[alsa-devel] testing hardware with alsaloop.

[tom at hitechsys.com]

Hello



Im running alsaloop test to test the audio on our hardware. Im specifically running this command - 

alsaloop -C hw:0,0 -P hw:1,0 -S 1 -l 480 -c 6 -v 

When I measure the delay through my hardware I get 11mSec - which is fine, and the audio quality is good as well. However after several hours 

of running this loop test the delay has increased to 90mSec. Can someone advice what is going wrong here please.



Best regards

Tom Favell | Hi Tech Systems Ltd



http://www.hitechsys.com



For support go to

https://support.hitechsys.com/



T: +44 (0) 1256 780880

M: +44 (0) 79797 55359

 http://www.hitechsys.com



© 2019 Hi Tech Systems Ltd. Holbrook House, Oakley Lane, Basingstoke, RG23 7JY, UK

Registered in England No. 2130346 | VAT No. GB 450390370



The information contained in this e-mail is confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the information in it by any other person is not authorized. The Internet is not a secure transmission medium and therefore the content of this e-mail may have been changed without the consent of the originator. If you are not the intended recipient, please destroy this email and contact the sender.http://www.hitechsys.com