[alsa-devel] [PATCH v3 3/3] ASoC: cros_ec_codec: Add codec driver for Cros EC
Guenter Roeck
linux at roeck-us.net
Thu Jan 17 05:34:28 CET 2019
On 1/16/19 8:25 PM, Cheng-yi Chiang wrote:
> Hi Guenter,
>
> Thanks for the review!
>
> On Wed, Jan 16, 2019 at 2:18 PM Guenter Roeck <linux at roeck-us.net> wrote:
>>
>> On Wed, Dec 26, 2018 at 03:03:19PM +0800, Cheng-Yi Chiang wrote:
>>> Add a codec driver to control ChromeOS EC codec.
>>>
>>> Use EC Host command to enable/disable I2S recording and control other
>>> configurations.
>>>
>>> Signed-off-by: Cheng-Yi Chiang <cychiang at chromium.org>
>>> ---
>>> Changes in v3:
>>> 1.remove cros_ec_codec.h.
>>> 2.Fix error code overriding in
>>> set_i2s_config
>>> set_i2s_sample_depth
>>> set_bclk
>>> get_ec_mic_gain
>>> set_ec_mic_gain
>>> enable_i2s
>>> 3.Fix missing return code in cros_ec_i2s_set_dai_fmt.
>>> 4.Simplify return code in cros_ec_i2s_hw_params and mic_gain_put.
>>> 5.Remove useless debug message in cros_ec_codec_platform_probe.
>>>
>>> MAINTAINERS | 2 +
>>> sound/soc/codecs/Kconfig | 8 +
>>> sound/soc/codecs/Makefile | 2 +
>>> sound/soc/codecs/cros_ec_codec.c | 454 +++++++++++++++++++++++++++++++
>>> 4 files changed, 466 insertions(+)
>>> create mode 100644 sound/soc/codecs/cros_ec_codec.c
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 05e1922624e58..d66f80f3252d7 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -3638,8 +3638,10 @@ F: drivers/platform/chrome/
>>>
>>> CHROMEOS EC CODEC DRIVER
>>> M: Cheng-Yi Chiang <cychiang at chromium.org>
>>> +R: Enric Balletbo i Serra <enric.balletbo at collabora.com>
>>> S: Maintained
>>> F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
>>> +F: sound/soc/codecs/cros_ec_codec.*
>>>
>>> CIRRUS LOGIC AUDIO CODEC DRIVERS
>>> M: Brian Austin <brian.austin at cirrus.com>
>>> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
>>> index 87cb9c51e6f5a..0b36428159b71 100644
>>> --- a/sound/soc/codecs/Kconfig
>>> +++ b/sound/soc/codecs/Kconfig
>>> @@ -50,6 +50,7 @@ config SND_SOC_ALL_CODECS
>>> select SND_SOC_BT_SCO
>>> select SND_SOC_BD28623
>>> select SND_SOC_CQ0093VC
>>> + select SND_SOC_CROS_EC_CODEC
>>
>> This unconditionally selects SND_SOC_CROS_EC_CODEC, but SND_SOC_CROS_EC_CODEC
>> depends on MFD_CROS_EC. This is missing an "if MFD_CROS_EC" qualifier.
>>
> Will fix in v4.
>>> select SND_SOC_CS35L32 if I2C
>>> select SND_SOC_CS35L33 if I2C
>>> select SND_SOC_CS35L34 if I2C
>>> @@ -457,6 +458,13 @@ config SND_SOC_CPCAP
>>> config SND_SOC_CQ0093VC
>>> tristate
>>>
>>> +config SND_SOC_CROS_EC_CODEC
>>> + tristate "codec driver for ChromeOS EC"
>>> + depends on MFD_CROS_EC
>>> + help
>>> + If you say yes here you will get support for the
>>> + ChromeOS Embedded Controller's Audio Codec.
>>> +
>>> config SND_SOC_CS35L32
>>> tristate "Cirrus Logic CS35L32 CODEC"
>>> depends on I2C
>>> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
>>> index 9bb3346fab2fe..3cfd8f5f61705 100644
>>> --- a/sound/soc/codecs/Makefile
>>> +++ b/sound/soc/codecs/Makefile
>>> @@ -42,6 +42,7 @@ snd-soc-bd28623-objs := bd28623.o
>>> snd-soc-bt-sco-objs := bt-sco.o
>>> snd-soc-cpcap-objs := cpcap.o
>>> snd-soc-cq93vc-objs := cq93vc.o
>>> +snd-soc-cros-ec-codec-objs := cros_ec_codec.o
>>> snd-soc-cs35l32-objs := cs35l32.o
>>> snd-soc-cs35l33-objs := cs35l33.o
>>> snd-soc-cs35l34-objs := cs35l34.o
>>> @@ -310,6 +311,7 @@ obj-$(CONFIG_SND_SOC_BD28623) += snd-soc-bd28623.o
>>> obj-$(CONFIG_SND_SOC_BT_SCO) += snd-soc-bt-sco.o
>>> obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
>>> obj-$(CONFIG_SND_SOC_CPCAP) += snd-soc-cpcap.o
>>> +obj-$(CONFIG_SND_SOC_CROS_EC_CODEC) += snd-soc-cros-ec-codec.o
>>> obj-$(CONFIG_SND_SOC_CS35L32) += snd-soc-cs35l32.o
>>> obj-$(CONFIG_SND_SOC_CS35L33) += snd-soc-cs35l33.o
>>> obj-$(CONFIG_SND_SOC_CS35L34) += snd-soc-cs35l34.o
>>> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
>>> new file mode 100644
>>> index 0000000000000..85ea23f4b681c
>>> --- /dev/null
>>> +++ b/sound/soc/codecs/cros_ec_codec.c
>>> @@ -0,0 +1,454 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Driver for ChromeOS Embedded Controller codec.
>>> + *
>>> + * This driver uses the cros-ec interface to communicate with the ChromeOS
>>> + * EC for audio function.
>>> + */
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/device.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/mfd/cros_ec.h>
>>> +#include <linux/mfd/cros_ec_commands.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <sound/pcm.h>
>>> +#include <sound/pcm_params.h>
>>> +#include <sound/soc.h>
>>> +#include <sound/tlv.h>
>>> +
>>> +#define MAX_GAIN 43
>>
>> Is there some reason for this magic number ? What does it reflect ?
>>
>
> This value is determined by the EC chip to represent the maximum gain
> in dB that EC codec can support.
> Since it might be different in the future for different EC chip, it
> needs to be adjustable.
> I plan to pass this value as "max-dmic-gain" from device property.
> This driver can lookup the property it its probe function, and modify
> the max value in mixer control for gain accordingly.
> I could not find similar use case in other codec driver but it should be doable.
> Please let me know if this is not encouraged.
>
A brief comment such as "Maximum gain in dB supported by EC codec" might be useful.
Thanks,
Guenter
>>> +
>>> +#define DRV_NAME "cros-ec-codec"
>>> +
>>> +/**
>>> + * struct cros_ec_codec_data - ChromeOS EC codec driver data.
>>> + * @dev: Device structure used in sysfs.
>>> + * @ec_device: cros_ec_device structure to talk to the physical device.
>>> + * @component: Pointer to the component.
>>> + */
>>> +struct cros_ec_codec_data {
>>> + struct device *dev;
>>> + struct cros_ec_device *ec_device;
>>> + struct snd_soc_component *component;
>>> +};
>>> +
>>> +static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
>>> +/*
>>> + * Wrapper for EC command.
>>> + */
>>> +static int ec_command(struct snd_soc_component *component, int version,
>>> + int command, u8 *outdata, int outsize,
>>> + u8 *indata, int insize)
>>> +{
>>> + struct cros_ec_codec_data *codec_data =
>>> + snd_soc_component_get_drvdata(component);
>>> + struct cros_ec_device *ec_device = codec_data->ec_device;
>>> + struct cros_ec_command *msg;
>>> + int ret;
>>> +
>>> + msg = kzalloc(sizeof(*msg) + max(insize, outsize), GFP_KERNEL);
>>> + if (!msg)
>>> + return -ENOMEM;
>>
>> As far as I can see, the calling parameter is always "struct ec_param_codec_i2s".
>> With that in mind, this code seems unnecessarily complex. Is this code expected
>> to be called multiple times in parallel and requires multiple instances of
>> struct ec_param_codec_i2s to be allocated ? Even if so, why not just use
>> a local variable / array ?
>>
>> [ This makes me wonder how EC transfers are synchronized in
>> cros_ec_cmd_xfer_status() and below. Does anyone know ? I don't immedately
>> see it.
>> ]
>
> I agree with you suggestion of using local variable.
> All the needed commands are subcommands in EC_CMD_CODEC_I2S command.
> So "struct ec_param_codec_i2s" is the only param that will be passed
> to ec_command function.
> This ec_command function can be greatly simplified.
>
> As for multiple access to this ec_command function, I need to dig more into it.
> There are locks in stream and kcontrol to guard the access
> respectively, but I am not sure if stream and kcontrol will access
> this ec_command function at the same time.
> It should be safer to use local variable to hold this parameter.
>
>>
>>> +
>>> + msg->version = version;
>>> + msg->command = command;
>>> + msg->outsize = outsize;
>>> + msg->insize = insize;
>>> +
>>> + if (outsize)
>>> + memcpy(msg->data, outdata, outsize);
>>> +
>>> + ret = cros_ec_cmd_xfer_status(ec_device, msg);
>>> + if (ret > 0 && insize)
>>> + memcpy(indata, msg->data, insize);
>>> +
>>> + kfree(msg);
>>> + return ret;
>>
>> I know this is wide-spread in cros_ec drivers, but that doesn't make it better.
>> The positive return value isn't used anywhere. On top of that, the called low
>> level code already generates error messages. As a result, the code calling this
>> function is unnecessarily complex. If the function was to return 0 for success
>> and a negative error code otherwise, pret much all all callers could be
>> simplified to
>>
>> return ec_command(...);
>>
>
> My intention was to print some error message so I can identify the
> command that failed.
> cros_ec_cmd_xfer and cros_ec_cmd_xfer_status have messages for error,
> but not the command it tried to send.
> I can remove them since they cause unnecessary complexity.
> I guess I can still rely on error messages in upper layers to tell
> what command fails.
> Will follow your advice in v4.
>
> Thanks again!
>
>
>
>>> +}
>>> +
>>> +static int set_i2s_config(struct snd_soc_component *component,
>>> + enum ec_i2s_config i2s_config)
>>> +{
>>> + struct ec_param_codec_i2s param;
>>> + int ret;
>>> +
>>> + dev_dbg(component->dev, "%s set I2S format to %u\n", __func__,
>>> + i2s_config);
>>> +
>>> + param.cmd = EC_CODEC_I2S_SET_CONFIG;
>>> + param.i2s_config = i2s_config;
>>> +
>>> + ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
>>> + (u8 *)¶m, sizeof(param),
>>> + NULL, 0);
>>> + if (ret < 0) {
>>> + dev_err(component->dev,
>>> + "set I2S format to %u command returned %d\n",
>>> + i2s_config, ret);
>>> + return ret;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int cros_ec_i2s_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
>>> +{
>>> + struct snd_soc_component *component = dai->component;
>>> + enum ec_i2s_config i2s_config;
>>> +
>>> + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>>> + case SND_SOC_DAIFMT_CBS_CFS:
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>>> + case SND_SOC_DAIFMT_NB_NF:
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>>> + case SND_SOC_DAIFMT_I2S:
>>> + i2s_config = EC_DAI_FMT_I2S;
>>> + break;
>>> +
>>> + case SND_SOC_DAIFMT_RIGHT_J:
>>> + i2s_config = EC_DAI_FMT_RIGHT_J;
>>> + break;
>>> +
>>> + case SND_SOC_DAIFMT_LEFT_J:
>>> + i2s_config = EC_DAI_FMT_LEFT_J;
>>> + break;
>>> +
>>> + case SND_SOC_DAIFMT_DSP_A:
>>> + i2s_config = EC_DAI_FMT_PCM_A;
>>> + break;
>>> +
>>> + case SND_SOC_DAIFMT_DSP_B:
>>> + i2s_config = EC_DAI_FMT_PCM_B;
>>> + break;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + return set_i2s_config(component, i2s_config);
>>> +}
>>> +
>>> +static int set_i2s_sample_depth(struct snd_soc_component *component,
>>> + enum ec_sample_depth_value depth)
>>> +{
>>> + struct ec_param_codec_i2s param;
>>> + int ret;
>>> +
>>> + dev_dbg(component->dev, "%s set depth to %u\n", __func__, depth);
>>> +
>>> + param.cmd = EC_CODEC_SET_SAMPLE_DEPTH;
>>> + param.depth = depth;
>>> +
>>> + ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
>>> + (u8 *)¶m, sizeof(param),
>>> + NULL, 0);
>>> + if (ret < 0) {
>>> + dev_err(component->dev, "I2S sample depth %u returned %d\n",
>>> + depth, ret);
>>> + return ret;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int set_bclk(struct snd_soc_component *component, uint32_t bclk)
>>> +{
>>> + struct ec_param_codec_i2s param;
>>> + int ret;
>>> +
>>> + dev_dbg(component->dev, "%s set i2s bclk to %u\n", __func__, bclk);
>>> +
>>> + param.cmd = EC_CODEC_I2S_SET_BCLK;
>>> + param.bclk = bclk;
>>> +
>>> + ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
>>> + (u8 *)¶m, sizeof(param),
>>> + NULL, 0);
>>> + if (ret < 0) {
>>> + dev_err(component->dev, "I2S set bclk %u command returned %d\n",
>>> + bclk, ret);
>>> + return ret;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int cros_ec_i2s_hw_params(struct snd_pcm_substream *substream,
>>> + struct snd_pcm_hw_params *params,
>>> + struct snd_soc_dai *dai)
>>> +{
>>> + struct snd_soc_component *component = dai->component;
>>> + int frame_size;
>>> + unsigned int rate, bclk;
>>> + int ret;
>>> +
>>> + frame_size = snd_soc_params_to_frame_size(params);
>>> + if (frame_size < 0) {
>>> + dev_err(component->dev, "Unsupported frame size: %d\n",
>>> + frame_size);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + rate = params_rate(params);
>>> + if (rate != 48000) {
>>> + dev_err(component->dev, "Unsupported rate\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + switch (params_format(params)) {
>>> + case SNDRV_PCM_FORMAT_S16_LE:
>>> + ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_16);
>>> + break;
>>> + case SNDRV_PCM_FORMAT_S24_LE:
>>> + ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_24);
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>
>> There is quite some inconsistency in error messages. Is there some kind of
>> plan behind it ? Do the error mesages above add value, but an error message
>> here wouldn't ?
>>
>>> + }
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + bclk = snd_soc_params_to_bclk(params);
>>> + return set_bclk(component, bclk);
>>> +}
>>> +
>>> +static const struct snd_soc_dai_ops cros_ec_i2s_dai_ops = {
>>> + .hw_params = cros_ec_i2s_hw_params,
>>> + .set_fmt = cros_ec_i2s_set_dai_fmt,
>>> +};
>>> +
>>> +struct snd_soc_dai_driver cros_ec_dai[] = {
>>> + {
>>> + .name = "cros_ec_codec I2S",
>>> + .id = 0,
>>> + .capture = {
>>> + .stream_name = "I2S Capture",
>>> + .channels_min = 2,
>>> + .channels_max = 2,
>>> + .rates = SNDRV_PCM_RATE_48000,
>>> + .formats = SNDRV_PCM_FMTBIT_S16_LE |
>>> + SNDRV_PCM_FMTBIT_S24_LE,
>>> + },
>>> + .ops = &cros_ec_i2s_dai_ops,
>>> + }
>>> +};
>>> +
>>> +static int get_ec_mic_gain(struct snd_soc_component *component,
>>> + u8 *left, u8 *right)
>>> +{
>>> + struct ec_param_codec_i2s param;
>>> + struct ec_response_codec_gain resp;
>>> + int ret;
>>> +
>>> + param.cmd = EC_CODEC_GET_GAIN;
>>> +
>>> + ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
>>> + (u8 *)¶m, sizeof(param),
>>> + (u8 *)&resp, sizeof(resp));
>>> + if (ret < 0) {
>>> + dev_err(component->dev, "I2S get gain command returned %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + *left = resp.left;
>>> + *right = resp.right;
>>> +
>>> + dev_dbg(component->dev, "%s get mic gain %u, %u\n", __func__,
>>> + *left, *right);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int mic_gain_get(struct snd_kcontrol *kcontrol,
>>> + struct snd_ctl_elem_value *ucontrol)
>>> +{
>>> + struct snd_soc_component *component =
>>> + snd_soc_kcontrol_component(kcontrol);
>>> + u8 left, right;
>>> + int ret;
>>> +
>>> + ret = get_ec_mic_gain(component, &left, &right);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ucontrol->value.integer.value[0] = left;
>>> + ucontrol->value.integer.value[1] = right;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int set_ec_mic_gain(struct snd_soc_component *component,
>>> + u8 left, u8 right)
>>> +{
>>> + struct ec_param_codec_i2s param;
>>> + int ret;
>>> +
>>> + dev_dbg(component->dev, "%s set mic gain to %u, %u\n",
>>> + __func__, left, right);
>>> +
>>> + param.cmd = EC_CODEC_SET_GAIN;
>>> + param.gain.left = left;
>>> + param.gain.right = right;
>>> +
>>> + ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
>>> + (u8 *)¶m, sizeof(param),
>>> + NULL, 0);
>>> + if (ret < 0) {
>>> + dev_err(component->dev, "I2S set gain command returned %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int mic_gain_put(struct snd_kcontrol *kcontrol,
>>> + struct snd_ctl_elem_value *ucontrol)
>>> +{
>>> + struct snd_soc_component *component =
>>> + snd_soc_kcontrol_component(kcontrol);
>>> + int left = ucontrol->value.integer.value[0];
>>> + int right = ucontrol->value.integer.value[1];
>>> +
>>> + if (left > MAX_GAIN || right > MAX_GAIN)
>>> + return -EINVAL;
>>> +
>>> + return set_ec_mic_gain(component, (u8)left, (u8)right);
>>> +}
>>> +
>>> +static const struct snd_kcontrol_new cros_ec_snd_controls[] = {
>>> + SOC_DOUBLE_EXT_TLV("EC Mic Gain", SND_SOC_NOPM, SND_SOC_NOPM, 0, 43, 0,
>>> + mic_gain_get, mic_gain_put, ec_mic_gain_tlv)
>>> +};
>>> +
>>> +static int enable_i2s(struct snd_soc_component *component, int enable)
>>> +{
>>> + struct ec_param_codec_i2s param;
>>> + int ret;
>>> +
>>> + dev_dbg(component->dev, "%s set i2s to %u\n", __func__, enable);
>>> +
>>> + param.cmd = EC_CODEC_I2S_ENABLE;
>>> + param.i2s_enable = enable;
>>> +
>>> + ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
>>> + (u8 *)¶m, sizeof(param),
>>> + NULL, 0);
>>> + if (ret < 0) {
>>> + dev_err(component->dev, "I2S enable %d command returned %d\n",
>>> + enable, ret);
>>> + return ret;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int cros_ec_i2s_enable_event(struct snd_soc_dapm_widget *w,
>>> + struct snd_kcontrol *kcontrol, int event)
>>> +{
>>> + struct snd_soc_component *component =
>>> + snd_soc_dapm_to_component(w->dapm);
>>> +
>>> + switch (event) {
>>> + case SND_SOC_DAPM_PRE_PMU:
>>> + dev_dbg(component->dev,
>>> + "%s got SND_SOC_DAPM_PRE_PMU event\n", __func__);
>>> + return enable_i2s(component, 1);
>>> +
>>> + case SND_SOC_DAPM_PRE_PMD:
>>> + dev_dbg(component->dev,
>>> + "%s got SND_SOC_DAPM_PRE_PMD event\n", __func__);
>>> + return enable_i2s(component, 0);
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/*
>>> + * The goal of this DAPM route is to turn on/off I2S using EC
>>> + * host command when capture stream is started/stopped.
>>> + */
>>> +static const struct snd_soc_dapm_widget cros_ec_dapm_widgets[] = {
>>> + SND_SOC_DAPM_INPUT("DMIC"),
>>> +
>>> + /*
>>> + * Control EC to enable/disable I2S.
>>> + */
>>> + SND_SOC_DAPM_SUPPLY("I2S Enable", SND_SOC_NOPM,
>>> + 0, 0, cros_ec_i2s_enable_event,
>>> + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
>>> +
>>> + SND_SOC_DAPM_AIF_OUT("I2STX", "I2S Capture", 0, SND_SOC_NOPM, 0, 0),
>>> +};
>>> +
>>> +static const struct snd_soc_dapm_route cros_ec_dapm_routes[] = {
>>> + { "I2STX", NULL, "DMIC" },
>>> + { "I2STX", NULL, "I2S Enable" },
>>> +};
>>> +
>>> +static const struct snd_soc_component_driver cros_ec_component_driver = {
>>> + .controls = cros_ec_snd_controls,
>>> + .num_controls = ARRAY_SIZE(cros_ec_snd_controls),
>>> + .dapm_widgets = cros_ec_dapm_widgets,
>>> + .num_dapm_widgets = ARRAY_SIZE(cros_ec_dapm_widgets),
>>> + .dapm_routes = cros_ec_dapm_routes,
>>> + .num_dapm_routes = ARRAY_SIZE(cros_ec_dapm_routes),
>>> +};
>>> +
>>> +/*
>>> + * Platform device and platform driver fro cros-ec-codec.
>>> + */
>>> +static int cros_ec_codec_platform_probe(struct platform_device *pd)
>>> +{
>>> + struct device *dev = &pd->dev;
>>> + struct cros_ec_device *ec_device = dev_get_drvdata(pd->dev.parent);
>>> + struct cros_ec_codec_data *codec_data;
>>> + int rc;
>>> +
>>> + codec_data = devm_kzalloc(dev, sizeof(struct cros_ec_codec_data),
>>> + GFP_KERNEL);
>>> + if (!codec_data)
>>> + return -ENOMEM;
>>> +
>>> + codec_data->dev = dev;
>>> + codec_data->ec_device = ec_device;
>>> +
>>> + platform_set_drvdata(pd, codec_data);
>>> +
>>> + rc = snd_soc_register_component(dev, &cros_ec_component_driver,
>>> + cros_ec_dai, ARRAY_SIZE(cros_ec_dai));
>>> +
>>> + return 0;
>>
>> Why ignore errors from snd_soc_register_component() ? Is this on purpose
>> or an oversight ?
>>
>>> +}
>>> +
>>> +#ifdef CONFIG_OF
>>> +static const struct of_device_id cros_ec_codec_of_match[] = {
>>> + { .compatible = "google,cros-ec-codec" },
>>> + {},
>>> +};
>>> +MODULE_DEVICE_TABLE(of, cros_ec_codec_of_match);
>>> +#endif
>>> +
>>> +static struct platform_driver cros_ec_codec_platform_driver = {
>>> + .driver = {
>>> + .name = DRV_NAME,
>>> + .of_match_table = of_match_ptr(cros_ec_codec_of_match),
>>> + },
>>> + .probe = cros_ec_codec_platform_probe,
>>> +};
>>> +
>>> +module_platform_driver(cros_ec_codec_platform_driver);
>>
>> The "platform" in the various variable and function names don't really
>> add any value.
>>
>>> +
>>> +MODULE_LICENSE("GPL v2");
>>> +MODULE_DESCRIPTION("ChromeOS EC codec driver");
>>> +MODULE_AUTHOR("Cheng-Yi Chiang <cychiang at chromium.org>");
>>> +MODULE_ALIAS("platform:" DRV_NAME);
>
More information about the Alsa-devel
mailing list