[alsa-devel] [PATCH v2 4/5] ALSA: hda: program stripe bits for controller

[Sameer Pujar]

Platforms having multiple hdmi/dp sinks require higher bandwidth
to support simultaneous playbacks of higher resolution. If hda
controller supports multiple SDO lines, STRIPE can be used to
indicate how many of the SDO lines the stream should be striped
across.

During stream start stripe control bits are programmed to use given
number of sdo lines and the same is cleared during stream stop.

Signed-off-by: Sameer Pujar <spujar at nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard at nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande at nvidia.com>
---
 sound/hda/hdac_stream.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c
index b403b05..7b71da0 100644
--- a/sound/hda/hdac_stream.c
+++ b/sound/hda/hdac_stream.c
@@ -82,6 +82,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_stream_init);
 void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start)
 {
 	struct hdac_bus *bus = azx_dev->bus;
+	int stripe_ctl;
 
 	trace_snd_hdac_stream_start(bus, azx_dev);
 
@@ -91,6 +92,10 @@ void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start)
 
 	/* enable SIE */
 	snd_hdac_chip_updatel(bus, INTCTL, 0, 1 << azx_dev->index);
+	/* set stripe control */
+	stripe_ctl = snd_hdac_get_stream_stripe_ctl(bus, azx_dev->substream);
+	snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK,
+				stripe_ctl);
 	/* set DMA start and interrupt mask */
 	snd_hdac_stream_updateb(azx_dev, SD_CTL,
 				0, SD_CTL_DMA_START | SD_INT_MASK);
@@ -107,6 +112,7 @@ void snd_hdac_stream_clear(struct hdac_stream *azx_dev)
 	snd_hdac_stream_updateb(azx_dev, SD_CTL,
 				SD_CTL_DMA_START | SD_INT_MASK, 0);
 	snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */
+	snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 0);
 	azx_dev->running = false;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_stream_clear);
-- 
2.7.4


-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------