[alsa-devel] [PATCH ucm/conf: 1/5] Update chtrt5645 ucm variants to use bytcr/PlatformEnableSeq.conf component
russell.parker7 at gmail.com
russell.parker7 at gmail.com
Sun Jan 6 04:47:11 CET 2019
From: Russell Parker <russell.parker7 at gmail.com>
The Lenovo Ideapad Miix 320, Asus T100HA, and chtrt5645 mono variant
UCM configurations have not been updated to make use of the shared
bytcr/PlatfromEnableSeq.conf sequence. This commit deletes those
command sequences and loads the shared component directly.
Signed-off-by: Russell Parker <russell.parker7 at gmail.com>
diff --git a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
index 78bf9823..61848358 100644
--- a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
+++ b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
@@ -11,121 +11,7 @@ SectionVerb {
EnableSequence [
cdev "hw:chtrt5645"
- # media mixer settings
- # compress
- cset "name='media0_in Gain 0 Switch' on"
- cset "name='media0_in Gain 0 Volume' 0"
-
- # normal
- cset "name='media1_in Gain 0 Switch' on"
- cset "name='media1_in Gain 0 Volume' 0"
- # swm loopback
- cset "name='media2_in Gain 0 Switch' off"
- cset "name='media2_in Gain 0 Volume' 0%"
- # deep buffer
- cset "name='media3_in Gain 0 Switch' on"
- cset "name='media3_in Gain 0 Volume' 0"
-
- cset "name='media0_out mix 0 media0_in Switch' on"
- cset "name='media0_out mix 0 media1_in Switch' on"
- cset "name='media0_out mix 0 media2_in Switch' off"
- cset "name='media0_out mix 0 media3_in Switch' on"
-
- cset "name='media1_out mix 0 media0_in Switch' off"
- cset "name='media1_out mix 0 media1_in Switch' off"
- cset "name='media1_out mix 0 media2_in Switch' off"
- cset "name='media1_out mix 0 media3_in Switch' off"
-
- cset "name='pcm0_in Gain 0 Switch' on"
- cset "name='pcm0_in Gain 0 Volume' 0"
-
- cset "name='pcm1_in Gain 0 Switch' off"
- cset "name='pcm1_in Gain 0 Volume' 0%"
-
- # codec0_out settings (used if ssp2 is connected to aif1)
- cset "name='codec_out0 mix 0 codec_in0 Switch' off"
- cset "name='codec_out0 mix 0 codec_in1 Switch' off"
- cset "name='codec_out0 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out0 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out0 mix 0 pcm0_in Switch' on"
- cset "name='codec_out0 mix 0 pcm1_in Switch' off"
- cset "name='codec_out0 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out0 Gain 0 Switch' on"
- cset "name='codec_out0 Gain 0 Volume' 0"
-
- # modem_out settings (used if ssp0 is connected to aif2)
- cset "name='modem_out mix 0 codec_in0 Switch' off"
- cset "name='modem_out mix 0 codec_in1 Switch' off"
- cset "name='modem_out mix 0 media_loop1_in Switch' off"
- cset "name='modem_out mix 0 media_loop2_in Switch' off"
- cset "name='modem_out mix 0 pcm0_in Switch' on"
- cset "name='modem_out mix 0 pcm1_in Switch' off"
- cset "name='modem_out mix 0 sprot_loop_in Switch' off"
- cset "name='modem_out Gain 0 Switch' on"
- cset "name='modem_out Gain 0 Volume' 0"
-
- # input settings
- # pcm1_out settings
-
- # input used when SSP2 is connected
- cset "name='codec_in0 Gain 0 Switch' on"
- cset "name='codec_in0 Gain 0 Volume' 0"
-
- # input used when SSP0 is connected
- cset "name='modem_in Gain 0 Switch' on"
- cset "name='modem_in Gain 0 Volume' 0"
-
- cset "name='pcm1_out mix 0 codec_in0 Switch' on"
- cset "name='pcm1_out mix 0 modem_in Switch' on"
- cset "name='pcm1_out mix 0 codec_in1 Switch' off"
- cset "name='pcm1_out mix 0 media_loop1_in Switch' off"
- cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
- cset "name='pcm1_out mix 0 pcm0_in Switch' off"
- cset "name='pcm1_out mix 0 pcm1_in Switch' off"
- cset "name='pcm1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='pcm1_out Gain 0 Switch' on"
- cset "name='pcm1_out Gain 0 Volume' 0"
-
- # disable codec_out1
- cset "name='codec_out1 mix 0 codec_in0 Switch' off"
- cset "name='codec_out1 mix 0 codec_in1 Switch' off"
- cset "name='codec_out1 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out1 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out1 mix 0 pcm0_in Switch' off"
- cset "name='codec_out1 mix 0 pcm1_in Switch' off"
- cset "name='codec_out1 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out1 Gain 0 Switch' off"
- cset "name='codec_out1 Gain 0 Volume' 0%"
-
- # disable codec_in1
- cset "name='codec_in1 Gain 0 Switch' off"
- cset "name='codec_in1 Gain 0 Volume' 0%"
-
- # disable all loops
- cset "name='media_loop1_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop1_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop1_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop1_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop2_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop2_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop2_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='sprot_loop_out mix 0 codec_in0 Switch' off"
- cset "name='sprot_loop_out mix 0 codec_in1 Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm0_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm1_in Switch' off"
- cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
+ <platforms/bytcr/PlatformEnableSeq.conf>
# Output Configuration
cset "name='DAC1 L Mux' IF1 DAC"
diff --git a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf
index 8cc9c7f2..d043f685 100644
--- a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf
+++ b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf
@@ -11,121 +11,7 @@ SectionVerb {
EnableSequence [
cdev "hw:chtrt5645"
- # media mixer settings
- # compress
- cset "name='media0_in Gain 0 Switch' on"
- cset "name='media0_in Gain 0 Volume' 0"
-
- # normal
- cset "name='media1_in Gain 0 Switch' on"
- cset "name='media1_in Gain 0 Volume' 0"
- # swm loopback
- cset "name='media2_in Gain 0 Switch' off"
- cset "name='media2_in Gain 0 Volume' 0%"
- # deep buffer
- cset "name='media3_in Gain 0 Switch' on"
- cset "name='media3_in Gain 0 Volume' 0"
-
- cset "name='media0_out mix 0 media0_in Switch' on"
- cset "name='media0_out mix 0 media1_in Switch' on"
- cset "name='media0_out mix 0 media2_in Switch' off"
- cset "name='media0_out mix 0 media3_in Switch' on"
-
- cset "name='media1_out mix 0 media0_in Switch' off"
- cset "name='media1_out mix 0 media1_in Switch' off"
- cset "name='media1_out mix 0 media2_in Switch' off"
- cset "name='media1_out mix 0 media3_in Switch' off"
-
- cset "name='pcm0_in Gain 0 Switch' on"
- cset "name='pcm0_in Gain 0 Volume' 0"
-
- cset "name='pcm1_in Gain 0 Switch' off"
- cset "name='pcm1_in Gain 0 Volume' 0%"
-
- # codec0_out settings (used if ssp2 is connected to aif1)
- cset "name='codec_out0 mix 0 codec_in0 Switch' off"
- cset "name='codec_out0 mix 0 codec_in1 Switch' off"
- cset "name='codec_out0 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out0 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out0 mix 0 pcm0_in Switch' on"
- cset "name='codec_out0 mix 0 pcm1_in Switch' off"
- cset "name='codec_out0 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out0 Gain 0 Switch' on"
- cset "name='codec_out0 Gain 0 Volume' 0"
-
- # modem_out settings (used if ssp0 is connected to aif2)
- cset "name='modem_out mix 0 codec_in0 Switch' off"
- cset "name='modem_out mix 0 codec_in1 Switch' off"
- cset "name='modem_out mix 0 media_loop1_in Switch' off"
- cset "name='modem_out mix 0 media_loop2_in Switch' off"
- cset "name='modem_out mix 0 pcm0_in Switch' on"
- cset "name='modem_out mix 0 pcm1_in Switch' off"
- cset "name='modem_out mix 0 sprot_loop_in Switch' off"
- cset "name='modem_out Gain 0 Switch' on"
- cset "name='modem_out Gain 0 Volume' 0"
-
- # input settings
- # pcm1_out settings
-
- # input used when SSP2 is connected
- cset "name='codec_in0 Gain 0 Switch' on"
- cset "name='codec_in0 Gain 0 Volume' 0"
-
- # input used when SSP0 is connected
- cset "name='modem_in Gain 0 Switch' on"
- cset "name='modem_in Gain 0 Volume' 0"
-
- cset "name='pcm1_out mix 0 codec_in0 Switch' on"
- cset "name='pcm1_out mix 0 modem_in Switch' on"
- cset "name='pcm1_out mix 0 codec_in1 Switch' off"
- cset "name='pcm1_out mix 0 media_loop1_in Switch' off"
- cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
- cset "name='pcm1_out mix 0 pcm0_in Switch' off"
- cset "name='pcm1_out mix 0 pcm1_in Switch' off"
- cset "name='pcm1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='pcm1_out Gain 0 Switch' on"
- cset "name='pcm1_out Gain 0 Volume' 0"
-
- # disable codec_out1
- cset "name='codec_out1 mix 0 codec_in0 Switch' off"
- cset "name='codec_out1 mix 0 codec_in1 Switch' off"
- cset "name='codec_out1 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out1 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out1 mix 0 pcm0_in Switch' off"
- cset "name='codec_out1 mix 0 pcm1_in Switch' off"
- cset "name='codec_out1 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out1 Gain 0 Switch' off"
- cset "name='codec_out1 Gain 0 Volume' 0%"
-
- # disable codec_in1
- cset "name='codec_in1 Gain 0 Switch' off"
- cset "name='codec_in1 Gain 0 Volume' 0%"
-
- # disable all loops
- cset "name='media_loop1_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop1_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop1_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop1_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop2_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop2_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop2_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='sprot_loop_out mix 0 codec_in0 Switch' off"
- cset "name='sprot_loop_out mix 0 codec_in1 Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm0_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm1_in Switch' off"
- cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
+ <platforms/bytcr/PlatformEnableSeq.conf>
# Output Configuration
cset "name='DAC1 L Mux' IF1 DAC"
diff --git a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf
index 7a0cd51c..c4452a4e 100644
--- a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf
+++ b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf
@@ -11,121 +11,7 @@ SectionVerb {
EnableSequence [
cdev "hw:chtrt5645"
- # media mixer settings
- # compress
- cset "name='media0_in Gain 0 Switch' on"
- cset "name='media0_in Gain 0 Volume' 0"
-
- # normal
- cset "name='media1_in Gain 0 Switch' on"
- cset "name='media1_in Gain 0 Volume' 0"
- # swm loopback
- cset "name='media2_in Gain 0 Switch' off"
- cset "name='media2_in Gain 0 Volume' 0%"
- # deep buffer
- cset "name='media3_in Gain 0 Switch' on"
- cset "name='media3_in Gain 0 Volume' 0"
-
- cset "name='media0_out mix 0 media0_in Switch' on"
- cset "name='media0_out mix 0 media1_in Switch' on"
- cset "name='media0_out mix 0 media2_in Switch' off"
- cset "name='media0_out mix 0 media3_in Switch' on"
-
- cset "name='media1_out mix 0 media0_in Switch' off"
- cset "name='media1_out mix 0 media1_in Switch' off"
- cset "name='media1_out mix 0 media2_in Switch' off"
- cset "name='media1_out mix 0 media3_in Switch' off"
-
- cset "name='pcm0_in Gain 0 Switch' on"
- cset "name='pcm0_in Gain 0 Volume' 0"
-
- cset "name='pcm1_in Gain 0 Switch' off"
- cset "name='pcm1_in Gain 0 Volume' 0%"
-
- # codec0_out settings (used if ssp2 is connected to aif1)
- cset "name='codec_out0 mix 0 codec_in0 Switch' off"
- cset "name='codec_out0 mix 0 codec_in1 Switch' off"
- cset "name='codec_out0 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out0 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out0 mix 0 pcm0_in Switch' on"
- cset "name='codec_out0 mix 0 pcm1_in Switch' off"
- cset "name='codec_out0 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out0 Gain 0 Switch' on"
- cset "name='codec_out0 Gain 0 Volume' 0"
-
- # modem_out settings (used if ssp0 is connected to aif2)
- cset "name='modem_out mix 0 codec_in0 Switch' off"
- cset "name='modem_out mix 0 codec_in1 Switch' off"
- cset "name='modem_out mix 0 media_loop1_in Switch' off"
- cset "name='modem_out mix 0 media_loop2_in Switch' off"
- cset "name='modem_out mix 0 pcm0_in Switch' on"
- cset "name='modem_out mix 0 pcm1_in Switch' off"
- cset "name='modem_out mix 0 sprot_loop_in Switch' off"
- cset "name='modem_out Gain 0 Switch' on"
- cset "name='modem_out Gain 0 Volume' 0"
-
- # input settings
- # pcm1_out settings
-
- # input used when SSP2 is connected
- cset "name='codec_in0 Gain 0 Switch' on"
- cset "name='codec_in0 Gain 0 Volume' 0"
-
- # input used when SSP0 is connected
- cset "name='modem_in Gain 0 Switch' on"
- cset "name='modem_in Gain 0 Volume' 0"
-
- cset "name='pcm1_out mix 0 codec_in0 Switch' on"
- cset "name='pcm1_out mix 0 modem_in Switch' on"
- cset "name='pcm1_out mix 0 codec_in1 Switch' off"
- cset "name='pcm1_out mix 0 media_loop1_in Switch' off"
- cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
- cset "name='pcm1_out mix 0 pcm0_in Switch' off"
- cset "name='pcm1_out mix 0 pcm1_in Switch' off"
- cset "name='pcm1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='pcm1_out Gain 0 Switch' on"
- cset "name='pcm1_out Gain 0 Volume' 0"
-
- # disable codec_out1
- cset "name='codec_out1 mix 0 codec_in0 Switch' off"
- cset "name='codec_out1 mix 0 codec_in1 Switch' off"
- cset "name='codec_out1 mix 0 media_loop1_in Switch' off"
- cset "name='codec_out1 mix 0 media_loop2_in Switch' off"
- cset "name='codec_out1 mix 0 pcm0_in Switch' off"
- cset "name='codec_out1 mix 0 pcm1_in Switch' off"
- cset "name='codec_out1 mix 0 sprot_loop_in Switch' off"
- cset "name='codec_out1 Gain 0 Switch' off"
- cset "name='codec_out1 Gain 0 Volume' 0%"
-
- # disable codec_in1
- cset "name='codec_in1 Gain 0 Switch' off"
- cset "name='codec_in1 Gain 0 Volume' 0%"
-
- # disable all loops
- cset "name='media_loop1_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop1_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop1_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop1_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop1_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
- cset "name='media_loop2_out mix 0 codec_in1 Switch' off"
- cset "name='media_loop2_out mix 0 media_loop1_in Switch' off"
- cset "name='media_loop2_out mix 0 media_loop2_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm0_in Switch' off"
- cset "name='media_loop2_out mix 0 pcm1_in Switch' off"
- cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off"
-
- cset "name='sprot_loop_out mix 0 codec_in0 Switch' off"
- cset "name='sprot_loop_out mix 0 codec_in1 Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off"
- cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm0_in Switch' off"
- cset "name='sprot_loop_out mix 0 pcm1_in Switch' off"
- cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
+ <platforms/bytcr/PlatformEnableSeq.conf>
# Output Configuration
cset "name='DAC1 L Mux' IF1 DAC"
diff --git a/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf b/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf
index b5ee2b41..6f5e899c 100644
--- a/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf
+++ b/src/conf/ucm/platforms/bytcr/PlatformEnableSeq.conf
@@ -29,7 +29,7 @@ cset "name='pcm0_in Gain 0 Volume' 0"
cset "name='pcm1_in Gain 0 Switch' off"
cset "name='pcm1_in Gain 0 Volume' 0%"
-# codec0_out settings (used if SSP2 is connected)
+# codec0_out settings (used if SSP2 is connected to aif1)
cset "name='codec_out0 mix 0 codec_in0 Switch' off"
cset "name='codec_out0 mix 0 codec_in1 Switch' off"
cset "name='codec_out0 mix 0 media_loop1_in Switch' off"
@@ -40,7 +40,7 @@ cset "name='codec_out0 mix 0 sprot_loop_in Switch' off"
cset "name='codec_out0 Gain 0 Switch' on"
cset "name='codec_out0 Gain 0 Volume' 0"
-# modem_out settings (used if SSP0 is connected)
+# modem_out settings (used if SSP0 is connected to aif2)
cset "name='modem_out mix 0 codec_in0 Switch' off"
cset "name='modem_out mix 0 codec_in1 Switch' off"
cset "name='modem_out mix 0 media_loop1_in Switch' off"
--
2.20.1
More information about the Alsa-devel
mailing list