[alsa-devel] Applied "ASoC: Intel: bytcht_es8316: Add support for SSP0 (BYTCR)" to the asoc tree
Mark Brown
broonie at kernel.org
Fri Jan 4 18:08:55 CET 2019
The patch
ASoC: Intel: bytcht_es8316: Add support for SSP0 (BYTCR)
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 349e13862c9975c613aac9dc7fa953e70cff9d06 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede at redhat.com>
Date: Thu, 3 Jan 2019 14:45:30 +0100
Subject: [PATCH] ASoC: Intel: bytcht_es8316: Add support for SSP0 (BYTCR)
Add support for having the codec connected to SSP0 instead of SSP2. This
is controlled through a new quirk parameter, similar to how this is done
in the bytcr_rt5640 and bytcr_rt5651 machine drivers.
Bay Trail CR (cost reduced) SoCs do not have an SSP2, so we default to SSP0
there.
Note the SPP0 quirk gets BIT(16) because bits 0-15 are reserved for non
boolean quirks like the input-map added in a later commit in this series.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/intel/boards/bytcht_es8316.c | 76 ++++++++++++++++++++++++--
1 file changed, 72 insertions(+), 4 deletions(-)
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index e29f00560b00..3358d82499a3 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
#include <asm/platform_sst_audio.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -37,6 +39,20 @@ struct byt_cht_es8316_private {
struct clk *mclk;
};
+#define BYT_CHT_ES8316_SSP0 BIT(16)
+
+static int quirk;
+
+static int quirk_override = -1;
+module_param_named(quirk, quirk_override, int, 0444);
+MODULE_PARM_DESC(quirk, "Board-specific quirk override");
+
+static void log_quirks(struct device *dev)
+{
+ if (quirk & BYT_CHT_ES8316_SSP0)
+ dev_info(dev, "quirk SSP0 enabled");
+}
+
static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
@@ -55,7 +71,16 @@ static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_ssp0_map[] = {
+ {"Playback", NULL, "ssp0 Tx"},
+ {"ssp0 Tx", NULL, "modem_out"},
+ {"modem_in", NULL, "ssp0 Rx"},
+ {"ssp0 Rx", NULL, "Capture"},
+};
+static const struct snd_soc_dapm_route byt_cht_es8316_ssp2_map[] = {
{"Playback", NULL, "ssp2 Tx"},
{"ssp2 Tx", NULL, "codec_out0"},
{"ssp2 Tx", NULL, "codec_out1"},
@@ -74,10 +99,23 @@ static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
{
struct snd_soc_card *card = runtime->card;
struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
+ const struct snd_soc_dapm_route *custom_map;
+ int num_routes;
int ret;
card->dapm.idle_bias_off = true;
+ if (quirk & BYT_CHT_ES8316_SSP0) {
+ custom_map = byt_cht_es8316_ssp0_map;
+ num_routes = ARRAY_SIZE(byt_cht_es8316_ssp0_map);
+ } else {
+ custom_map = byt_cht_es8316_ssp2_map;
+ num_routes = ARRAY_SIZE(byt_cht_es8316_ssp2_map);
+ }
+ ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
+ if (ret)
+ return ret;
+
/*
* The firmware might enable the clock at boot (this information
* may or may not be reflected in the enable clock register).
@@ -123,14 +161,21 @@ static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
- int ret;
+ int ret, bits;
/* The DSP will covert the FE rate to 48k, stereo */
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
- /* set SSP2 to 24-bit */
- params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+ if (quirk & BYT_CHT_ES8316_SSP0) {
+ /* set SSP0 to 16-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
+ bits = 16;
+ } else {
+ /* set SSP2 to 24-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+ bits = 24;
+ }
/*
* Default mode for SSP configuration is TDM 4 slot, override config
@@ -147,7 +192,7 @@ static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
return ret;
}
- ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits);
if (ret < 0) {
dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
return ret;
@@ -232,6 +277,11 @@ static struct snd_soc_card byt_cht_es8316_card = {
.fully_routed = true,
};
+static const struct x86_cpu_id baytrail_cpu_ids[] = {
+ { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT }, /* Valleyview */
+ {}
+};
+
static char codec_name[SND_ACPI_I2C_ID_LEN];
static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
@@ -266,6 +316,24 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
byt_cht_es8316_dais[dai_index].codec_name = codec_name;
}
+ /* Check for BYTCR or other platform and setup quirks */
+ if (x86_match_cpu(baytrail_cpu_ids) &&
+ mach->mach_params.acpi_ipc_irq_index == 0) {
+ /* On BYTCR default to SSP0 */
+ quirk = BYT_CHT_ES8316_SSP0;
+ } else {
+ quirk = 0;
+ }
+ if (quirk_override != -1) {
+ dev_info(dev, "Overriding quirk 0x%x => 0x%x\n", quirk,
+ quirk_override);
+ quirk = quirk_override;
+ }
+ log_quirks(dev);
+
+ if (quirk & BYT_CHT_ES8316_SSP0)
+ byt_cht_es8316_dais[dai_index].cpu_dai_name = "ssp0-port";
+
/* get the clock */
priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
if (IS_ERR(priv->mclk)) {
--
2.20.1
More information about the Alsa-devel
mailing list