[alsa-devel] [PATCH v3 Resend 10/13] ASoC: samsung: i2s: Simplify pri_dai, sec_dai pointers usage

[Sylwester Nawrocki]

If the probe call is on the primary DAI we can use 'other' in place of
i2s->sec_dai, if the probe call is on the secondary DAI we can use 'i2s'
in place of other->sec_dai.

While at it fix one whitespace issue.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Acked-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 sound/soc/samsung/i2s.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 16e6868376f6..4f15b6af8268 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -1057,18 +1057,17 @@ static int samsung_i2s_dai_probe(struct snd_soc_dai *dai)
 	pm_runtime_get_sync(dai->dev);
 
 	if (is_secondary(i2s)) { /* If this is probe on the secondary DAI */
-		snd_soc_dai_init_dma_data(dai, &other->sec_dai->dma_playback,
-					   NULL);
+		snd_soc_dai_init_dma_data(dai, &i2s->dma_playback, NULL);
 	} else {
 		snd_soc_dai_init_dma_data(dai, &i2s->dma_playback,
-					   &i2s->dma_capture);
+					  &i2s->dma_capture);
 
 		if (priv->quirks & QUIRK_NEED_RSTCLR)
 			writel(CON_RSTCLR, priv->addr + I2SCON);
 
 		if (priv->quirks & QUIRK_SUPPORTS_IDMA)
 			idma_reg_addr_init(priv->addr,
-					i2s->sec_dai->idma_playback.addr);
+					   other->idma_playback.addr);
 	}
 
 	/* Reset any constraint on RFS and BFS */
-- 
2.17.1