[alsa-devel] [PATCH] ASoC: rt5682: Check JD status when system resume

shumingf at realtek.com shumingf at realtek.com
Thu Feb 14 06:45:01 CET 2019


From: Shuming Fan <shumingf at realtek.com>

The IRQ function may not work when system suspend.
We remove snd_soc_dapm_force_enable_pin function call to
make sure the bias off when idle and run into suspend/resume function.

Signed-off-by: Shuming Fan <shumingf at realtek.com>
---
 sound/soc/codecs/rt5682.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 9d5acd2..b7e2e99 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -910,13 +910,20 @@ static int rt5682_headset_detect(struct snd_soc_component *component,
 		int jack_insert)
 {
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	struct snd_soc_dapm_context *dapm =
-		snd_soc_component_get_dapm(component);
 	unsigned int val, count;
 
 	if (jack_insert) {
-		snd_soc_dapm_force_enable_pin(dapm, "CBJ Power");
-		snd_soc_dapm_sync(dapm);
+
+		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1,
+			RT5682_PWR_VREF2, RT5682_PWR_VREF2);
+		snd_soc_component_update_bits(component,
+				RT5682_PWR_ANLG_1, RT5682_PWR_FV2, 0);
+		usleep_range(15000, 20000);
+		snd_soc_component_update_bits(component,
+				RT5682_PWR_ANLG_1, RT5682_PWR_FV2, RT5682_PWR_FV2);
+		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
+			RT5682_PWR_CBJ, RT5682_PWR_CBJ);
+
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
 			RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_HIGH);
 
@@ -944,8 +951,10 @@ static int rt5682_headset_detect(struct snd_soc_component *component,
 		rt5682_enable_push_button_irq(component, false);
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
 			RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW);
-		snd_soc_dapm_disable_pin(dapm, "CBJ Power");
-		snd_soc_dapm_sync(dapm);
+		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1,
+			RT5682_PWR_VREF2, 0);
+		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
+			RT5682_PWR_CBJ, 0);
 
 		rt5682->jack_type = 0;
 	}
@@ -1591,8 +1600,6 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 		0, NULL, 0),
 	SND_SOC_DAPM_SUPPLY("Vref1", RT5682_PWR_ANLG_1, RT5682_PWR_VREF1_BIT, 0,
 		rt5655_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
-	SND_SOC_DAPM_SUPPLY("Vref2", RT5682_PWR_ANLG_1, RT5682_PWR_VREF2_BIT, 0,
-		rt5655_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
 
 	/* ASRC */
 	SND_SOC_DAPM_SUPPLY_S("DAC STO1 ASRC", 1, RT5682_PLL_TRACK_1,
@@ -1627,9 +1634,6 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 	SND_SOC_DAPM_PGA("BST1 CBJ", SND_SOC_NOPM,
 		0, 0, NULL, 0),
 
-	SND_SOC_DAPM_SUPPLY("CBJ Power", RT5682_PWR_ANLG_3,
-		RT5682_PWR_CBJ_BIT, 0, NULL, 0),
-
 	/* REC Mixer */
 	SND_SOC_DAPM_MIXER("RECMIX1L", SND_SOC_NOPM, 0, 0, rt5682_rec1_l_mix,
 		ARRAY_SIZE(rt5682_rec1_l_mix)),
@@ -1792,17 +1796,13 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 
 	/*Vref*/
 	{"MICBIAS1", NULL, "Vref1"},
-	{"MICBIAS1", NULL, "Vref2"},
 	{"MICBIAS2", NULL, "Vref1"},
-	{"MICBIAS2", NULL, "Vref2"},
 
 	{"CLKDET SYS", NULL, "CLKDET"},
 
 	{"IN1P", NULL, "LDO2"},
 
 	{"BST1 CBJ", NULL, "IN1P"},
-	{"BST1 CBJ", NULL, "CBJ Power"},
-	{"CBJ Power", NULL, "Vref2"},
 
 	{"RECMIX1L", "CBJ Switch", "BST1 CBJ"},
 	{"RECMIX1L", NULL, "RECMIX1L Power"},
@@ -1912,9 +1912,7 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	{"HP Amp", NULL, "Capless"},
 	{"HP Amp", NULL, "Charge Pump"},
 	{"HP Amp", NULL, "CLKDET SYS"},
-	{"HP Amp", NULL, "CBJ Power"},
 	{"HP Amp", NULL, "Vref1"},
-	{"HP Amp", NULL, "Vref2"},
 	{"HPOL Playback", "Switch", "HP Amp"},
 	{"HPOR Playback", "Switch", "HP Amp"},
 	{"HPOL", NULL, "HPOL Playback"},
@@ -2363,6 +2361,8 @@ static int rt5682_resume(struct snd_soc_component *component)
 	regcache_cache_only(rt5682->regmap, false);
 	regcache_sync(rt5682->regmap);
 
+	rt5682_irq(0, rt5682);
+
 	return 0;
 }
 #else
-- 
2.7.4



More information about the Alsa-devel mailing list