[alsa-devel] [resend] [PATCH] ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic") added new rsnd_ssi_prepare() and moved
rsnd_ssi_master_clk_start() to .prepare.
But, ssi user count (= ssi->usrcnt) is incremented at .init
(= rsnd_ssi_init()).
Because of these timing exchange, ssi->usrcnt check at
rsnd_ssi_master_clk_start() should be adjusted.
Otherwise, 2nd master clock setup will be no check.
This patch fixup this issue.

Fixes: commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic")
Reported-by: Yusuke Goda <yusuke.goda.sx at renesas.com>
Reported-by: Valentine Barshak <valentine.barshak at cogentembedded.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx at renesas.com>
---
Mark

this is for v5.0

 sound/soc/sh/rcar/ssi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 45ef295..f5afab6 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -286,7 +286,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
 	if (rsnd_ssi_is_multi_slave(mod, io))
 		return 0;
 
-	if (ssi->usrcnt > 1) {
+	if (ssi->usrcnt > 0) {
 		if (ssi->rate != rate) {
 			dev_err(dev, "SSI parent/child should use same rate\n");
 			return -EINVAL;
-- 
2.7.4

_______________________________________________
Alsa-devel mailing list
Alsa-devel at alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel