[alsa-devel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples
Dmitry Osipenko
digetx at gmail.com
Fri Dec 20 17:40:58 CET 2019
20.12.2019 18:25, Ben Dooks пишет:
> On 20/12/2019 15:02, Dmitry Osipenko wrote:
>> 20.12.2019 17:56, Ben Dooks пишет:
>>> On 20/12/2019 14:43, Dmitry Osipenko wrote:
>>>> 20.12.2019 16:57, Jon Hunter пишет:
>>>>>
>>>>> On 20/12/2019 11:38, Ben Dooks wrote:
>>>>>> On 20/12/2019 11:30, Jon Hunter wrote:
>>>>>>>
>>>>>>> On 25/11/2019 17:28, Dmitry Osipenko wrote:
>>>>>>>> 25.11.2019 20:22, Dmitry Osipenko пишет:
>>>>>>>>> 25.11.2019 13:37, Ben Dooks пишет:
>>>>>>>>>> On 23/11/2019 21:09, Dmitry Osipenko wrote:
>>>>>>>>>>> 18.10.2019 18:48, Ben Dooks пишет:
>>>>>>>>>>>> From: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>>>>>>>>
>>>>>>>>>>>> The tegra3 audio can support 24 and 32 bit sample sizes so add
>>>>>>>>>>>> the
>>>>>>>>>>>> option to the tegra30_i2s_hw_params to configure the S24_LE or
>>>>>>>>>>>> S32_LE
>>>>>>>>>>>> formats when requested.
>>>>>>>>>>>>
>>>>>>>>>>>> Signed-off-by: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>>>>>>>> [ben.dooks at codethink.co.uk: fixup merge of 24 and 32bit]
>>>>>>>>>>>> [ben.dooks at codethink.co.uk: add pm calls around ytdm config]
>>>>>>>>>>>> [ben.dooks at codethink.co.uk: drop debug printing to dev_dbg]
>>>>>>>>>>>> Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
>>>>>>>>>>>> ---
>>>>>>>>>>>> squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is
>>>>>>>>>>>> needed
>>>>>>>>>>>> in tdm code
>>>>>>>>>>>>
>>>>>>>>>>>> ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
>>>>>>>>>>>> ---
>>>>>>>>>>>> sound/soc/tegra/tegra30_i2s.c | 25
>>>>>>>>>>>> ++++++++++++++++++++-----
>>>>>>>>>>>> 1 file changed, 20 insertions(+), 5 deletions(-)
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>>>> b/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>>>> index 73f0dddeaef3..063f34c882af 100644
>>>>>>>>>>>> --- a/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>>>> +++ b/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>>>> @@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>>>> struct device *dev = dai->dev;
>>>>>>>>>>>> struct tegra30_i2s *i2s =
>>>>>>>>>>>> snd_soc_dai_get_drvdata(dai);
>>>>>>>>>>>> unsigned int mask, val, reg;
>>>>>>>>>>>> - int ret, sample_size, srate, i2sclock, bitcnt;
>>>>>>>>>>>> + int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
>>>>>>>>>>>> struct tegra30_ahub_cif_conf cif_conf;
>>>>>>>>>>>> if (params_channels(params) != 2)
>>>>>>>>>>>> @@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>>>> switch (params_format(params)) {
>>>>>>>>>>>> case SNDRV_PCM_FORMAT_S16_LE:
>>>>>>>>>>>> val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
>>>>>>>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>>>>> sample_size = 16;
>>>>>>>>>>>> break;
>>>>>>>>>>>> + case SNDRV_PCM_FORMAT_S24_LE:
>>>>>>>>>>>> + val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
>>>>>>>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_24;
>>>>>>>>>>>> + sample_size = 24;
>>>>>>>>>>>> + break;
>>>>>>>>>>>> + case SNDRV_PCM_FORMAT_S32_LE:
>>>>>>>>>>>> + val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
>>>>>>>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_32;
>>>>>>>>>>>> + sample_size = 32;
>>>>>>>>>>>> + break;
>>>>>>>>>>>> default:
>>>>>>>>>>>> return -EINVAL;
>>>>>>>>>>>> }
>>>>>>>>>>>> @@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>>>> cif_conf.threshold = 0;
>>>>>>>>>>>> cif_conf.audio_channels = 2;
>>>>>>>>>>>> cif_conf.client_channels = 2;
>>>>>>>>>>>> - cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>>>>> - cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>>>>> + cif_conf.audio_bits = audio_bits;
>>>>>>>>>>>> + cif_conf.client_bits = audio_bits;
>>>>>>>>>>>> cif_conf.expand = 0;
>>>>>>>>>>>> cif_conf.stereo_conv = 0;
>>>>>>>>>>>> cif_conf.replicate = 0;
>>>>>>>>>>>> @@ -306,14 +317,18 @@ static const struct snd_soc_dai_driver
>>>>>>>>>>>> tegra30_i2s_dai_template = {
>>>>>>>>>>>> .channels_min = 2,
>>>>>>>>>>>> .channels_max = 2,
>>>>>>>>>>>> .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>>>>>>>> - .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>>>> + .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>>>>>>>> + SNDRV_PCM_FMTBIT_S24_LE |
>>>>>>>>>>>> + SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>>>> },
>>>>>>>>>>>> .capture = {
>>>>>>>>>>>> .stream_name = "Capture",
>>>>>>>>>>>> .channels_min = 2,
>>>>>>>>>>>> .channels_max = 2,
>>>>>>>>>>>> .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>>>>>>>> - .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>>>> + .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>>>>>>>> + SNDRV_PCM_FMTBIT_S24_LE |
>>>>>>>>>>>> + SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>>>> },
>>>>>>>>>>>> .ops = &tegra30_i2s_dai_ops,
>>>>>>>>>>>> .symmetric_rates = 1,
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Hello,
>>>>>>>>>>>
>>>>>>>>>>> This patch breaks audio on Tegra30. I don't see errors
>>>>>>>>>>> anywhere, but
>>>>>>>>>>> there is no audio and reverting this patch helps. Please fix it.
>>>>>>>>>>
>>>>>>>>>> What is the failure mode? I can try and take a look at this some
>>>>>>>>>> time
>>>>>>>>>> this week, but I am not sure if I have any boards with an actual
>>>>>>>>>> useful
>>>>>>>>>> audio output?
>>>>>>>>>
>>>>>>>>> The failure mode is that there no sound. I also noticed that video
>>>>>>>>> playback stutters a lot if movie file has audio track, seems
>>>>>>>>> something
>>>>>>>>> times out during of the audio playback. For now I don't have any
>>>>>>>>> more info.
>>>>>>>>>
>>>>>>>>
>>>>>>>> Oh, I didn't say how to reproduce it.. for example simply playing
>>>>>>>> big_buck_bunny_720p_h264.mov in MPV has the audio problem.
>>>>>>>>
>>>>>>>> https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_h264.mov
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> Given that the audio drivers uses regmap, it could be good to
>>>>>>> dump the
>>>>>>> I2S/AHUB registers while the clip if playing with and without this
>>>>>>> patch
>>>>>>> to see the differences. I am curious if the audio is now being
>>>>>>> played as
>>>>>>> 24 or 32-bit instead of 16-bit now these are available.
>>>>>>>
>>>>>>> You could also dump the hw_params to see the format while playing as
>>>>>>> well ...
>>>>>>>
>>>>>>> $ /proc/asound/<scard-name>/pcm0p/sub0/hw_params
>>>>>>
>>>>>> I suppose it is also possible that the codec isn't properly doing >16
>>>>>> bits and the fact we now offer 24 and 32 could be an issue. I've not
>>>>>> got anything with an audio output on it that would be easy to test.
>>>>>
>>>>> I thought I had tested on a Jetson TK1 (Tegra124) but it was sometime
>>>>> back. However, admittedly I may have only done simple 16-bit testing
>>>>> with speaker-test.
>>>>>
>>>>> We do verify that all soundcards are detected and registered as
>>>>> expected
>>>>> during daily testing, but at the moment we don't have anything that
>>>>> verifies actual playback.
>>>>
>>>> Please take a look at the attached logs.
>>>
>>> I wonder if we are falling into FIFO configuration issues with the
>>> non-16 bit case.
>>>
>>> Can you try adding the following two patches?
>>
>> It is much better now! There is no horrible noise and no stuttering, but
>> audio still has a "robotic" effect, like freq isn't correct.
>
> I wonder if there's an issue with FIFO stoking? I should also possibly
> add the correctly stop FIFOs patch as well.
I'll be happy to try more patches.
Meanwhile sound on v5.5+ is broken and thus the incomplete patches
should be reverted.
More information about the Alsa-devel
mailing list