[alsa-devel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples
Ben Dooks
ben.dooks at codethink.co.uk
Fri Dec 20 11:56:56 CET 2019
On 19/12/2019 21:21, Dmitry Osipenko wrote:
> 25.11.2019 20:28, Dmitry Osipenko пишет:
>> 25.11.2019 20:22, Dmitry Osipenko пишет:
>>> 25.11.2019 13:37, Ben Dooks пишет:
>>>> On 23/11/2019 21:09, Dmitry Osipenko wrote:
>>>>> 18.10.2019 18:48, Ben Dooks пишет:
>>>>>> From: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>>
>>>>>> The tegra3 audio can support 24 and 32 bit sample sizes so add the
>>>>>> option to the tegra30_i2s_hw_params to configure the S24_LE or S32_LE
>>>>>> formats when requested.
>>>>>>
>>>>>> Signed-off-by: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>> [ben.dooks at codethink.co.uk: fixup merge of 24 and 32bit]
>>>>>> [ben.dooks at codethink.co.uk: add pm calls around ytdm config]
>>>>>> [ben.dooks at codethink.co.uk: drop debug printing to dev_dbg]
>>>>>> Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
>>>>>> ---
>>>>>> squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is needed
>>>>>> in tdm code
>>>>>>
>>>>>> ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
>>>>>> ---
>>>>>> sound/soc/tegra/tegra30_i2s.c | 25 ++++++++++++++++++++-----
>>>>>> 1 file changed, 20 insertions(+), 5 deletions(-)
>>>>>>
>>>>>> diff --git a/sound/soc/tegra/tegra30_i2s.c
>>>>>> b/sound/soc/tegra/tegra30_i2s.c
>>>>>> index 73f0dddeaef3..063f34c882af 100644
>>>>>> --- a/sound/soc/tegra/tegra30_i2s.c
>>>>>> +++ b/sound/soc/tegra/tegra30_i2s.c
>>>>>> @@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct
>>>>>> snd_pcm_substream *substream,
>>>>>> struct device *dev = dai->dev;
>>>>>> struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>>>>> unsigned int mask, val, reg;
>>>>>> - int ret, sample_size, srate, i2sclock, bitcnt;
>>>>>> + int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
>>>>>> struct tegra30_ahub_cif_conf cif_conf;
>>>>>> if (params_channels(params) != 2)
>>>>>> @@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct
>>>>>> snd_pcm_substream *substream,
>>>>>> switch (params_format(params)) {
>>>>>> case SNDRV_PCM_FORMAT_S16_LE:
>>>>>> val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>> sample_size = 16;
>>>>>> break;
>>>>>> + case SNDRV_PCM_FORMAT_S24_LE:
>>>>>> + val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_24;
>>>>>> + sample_size = 24;
>>>>>> + break;
>>>>>> + case SNDRV_PCM_FORMAT_S32_LE:
>>>>>> + val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_32;
>>>>>> + sample_size = 32;
>>>>>> + break;
>>>>>> default:
>>>>>> return -EINVAL;
>>>>>> }
>>>>>> @@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct
>>>>>> snd_pcm_substream *substream,
>>>>>> cif_conf.threshold = 0;
>>>>>> cif_conf.audio_channels = 2;
>>>>>> cif_conf.client_channels = 2;
>>>>>> - cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>> - cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>> + cif_conf.audio_bits = audio_bits;
>>>>>> + cif_conf.client_bits = audio_bits;
>>>>>> cif_conf.expand = 0;
>>>>>> cif_conf.stereo_conv = 0;
>>>>>> cif_conf.replicate = 0;
>>>>>> @@ -306,14 +317,18 @@ static const struct snd_soc_dai_driver
>>>>>> tegra30_i2s_dai_template = {
>>>>>> .channels_min = 2,
>>>>>> .channels_max = 2,
>>>>>> .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>> - .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>> + .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>> + SNDRV_PCM_FMTBIT_S24_LE |
>>>>>> + SNDRV_PCM_FMTBIT_S16_LE,
>>>>>> },
>>>>>> .capture = {
>>>>>> .stream_name = "Capture",
>>>>>> .channels_min = 2,
>>>>>> .channels_max = 2,
>>>>>> .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>> - .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>> + .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>> + SNDRV_PCM_FMTBIT_S24_LE |
>>>>>> + SNDRV_PCM_FMTBIT_S16_LE,
>>>>>> },
>>>>>> .ops = &tegra30_i2s_dai_ops,
>>>>>> .symmetric_rates = 1,
>>>>>>
>>>>>
>>>>> Hello,
>>>>>
>>>>> This patch breaks audio on Tegra30. I don't see errors anywhere, but
>>>>> there is no audio and reverting this patch helps. Please fix it.
>>>>
>>>> What is the failure mode? I can try and take a look at this some time
>>>> this week, but I am not sure if I have any boards with an actual useful
>>>> audio output?
>>>
>>> The failure mode is that there no sound. I also noticed that video
>>> playback stutters a lot if movie file has audio track, seems something
>>> times out during of the audio playback. For now I don't have any more info.
>>>
>>
>> Oh, I didn't say how to reproduce it.. for example simply playing
>> big_buck_bunny_720p_h264.mov in MPV has the audio problem.
>>
>> https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_h264.mov
>>
>
> Hello Ben,
>
> Do you have any updates? I just re-check whether problem persists and
> it's still there using a recent linux-next.
>
> Interestingly, I can hear some sound now, but it's very distorted.
>
> If you don't have a solution, then what about to revert the patches for
> now and try again later on?
I will try and have a look later, I had completely forgotten these had
been merged.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
https://www.codethink.co.uk/privacy.html
More information about the Alsa-devel
mailing list