[alsa-devel] [PATCH] ASoC: sgtl5000: Revert "ASoC: sgtl5000: Fix of unmute outputs on probe"

[Alison Wang]

This reverts commit 631bc8f0134ae9620d86a96b8c5f9445d91a2dca.

In commit 631bc8f0134a, snd_soc_component_update_bits is used instead of
snd_soc_component_write. Although EN_HP_ZCD and EN_ADC_ZCD are enabled
in ANA_CTRL register, MUTE_LO, MUTE_HP and MUTE_ADC bits are remained as
the default value. It causes LO, HP and ADC are all muted after driver
probe.

The patch is to revert this commit, snd_soc_component_write is still
used and MUTE_LO, MUTE_HP and MUTE_ADC are set as zero (unmuted).

Signed-off-by: Alison Wang <alison.wang at nxp.com>
---
 sound/soc/codecs/sgtl5000.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index aa1f963..0b35fca 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1458,7 +1458,6 @@ static int sgtl5000_probe(struct snd_soc_component *component)
 	int ret;
 	u16 reg;
 	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
-	unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN;
 
 	/* power up sgtl5000 */
 	ret = sgtl5000_set_power_regs(component);
@@ -1486,8 +1485,9 @@ static int sgtl5000_probe(struct snd_soc_component *component)
 	       0x1f);
 	snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);
 
-	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
-		zcd_mask, zcd_mask);
+	snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL,
+			SGTL5000_HP_ZCD_EN |
+			SGTL5000_ADC_ZCD_EN);
 
 	snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
 			SGTL5000_BIAS_R_MASK,
-- 
2.9.5