[alsa-devel] [PATCH 3/4] ASoC: ti: edma-pcm: Fix for legacy dma_slave_map based channel lookup

[Peter Ujfalusi]

Most of the daVinci devices does not boot with DT. In this case the DMA
channel is looked up with dma_slave_map and for that the chan_names[]
must be configured.

Both McASP and ASP/McBSP uses "tx" and "rx" as channel names, so we can
just do this when the dev->of_node is not valid.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 sound/soc/ti/edma-pcm.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/sound/soc/ti/edma-pcm.c b/sound/soc/ti/edma-pcm.c
index 3ebea1bd15cb..634b040b65f0 100644
--- a/sound/soc/ti/edma-pcm.c
+++ b/sound/soc/ti/edma-pcm.c
@@ -39,7 +39,22 @@ static const struct snd_dmaengine_pcm_config edma_dmaengine_pcm_config = {
 
 int edma_pcm_platform_register(struct device *dev)
 {
-	return devm_snd_dmaengine_pcm_register(dev, &edma_dmaengine_pcm_config, 0);
+	struct snd_dmaengine_pcm_config *config;
+
+	if (dev->of_node)
+		return devm_snd_dmaengine_pcm_register(dev,
+						&edma_dmaengine_pcm_config, 0);
+
+	config = devm_kzalloc(dev, sizeof(*config), GFP_KERNEL);
+	if (!config)
+		return -ENOMEM;
+
+	*config = edma_dmaengine_pcm_config;
+
+	config->chan_names[0] = "tx";
+	config->chan_names[1] = "rx";
+
+	return devm_snd_dmaengine_pcm_register(dev, config, 0);
 }
 EXPORT_SYMBOL_GPL(edma_pcm_platform_register);
 
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki