[alsa-devel] [PATCH v6 1/4] dt-bindings: soundwire: add slave bindings

[Srinivas Kandagatla]

This patch adds bindings for Soundwire Slave devices that includes how
SoundWire enumeration address and Link ID are used to represented in
SoundWire slave device tree nodes.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
 .../soundwire/soundwire-controller.yaml       | 82 +++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml

diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
new file mode 100644
index 000000000000..1b43993bccdb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/soundwire-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SoundWire Controller Generic Binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
+  - Vinod Koul <vkoul at kernel.org>
+
+description: |
+  SoundWire busses can be described with a node for the SoundWire controller
+  device and a set of child nodes for each SoundWire slave on the bus.
+
+properties:
+  $nodename:
+    pattern: "^soundwire(@.*)?$"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f],[0-9a-f]$":
+    type: object
+
+    properties:
+      compatible:
+        pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
+        description: Is the textual representation of SoundWire Enumeration
+          address. compatible string should contain SoundWire Version ID,
+          Manufacturer ID, Part ID and Class ID in order and shall be in
+          lower-case hexadecimal with leading zeroes.
+          Valid sizes of these fields are
+          Version ID is 1 nibble, number '0x1' represents SoundWire 1.0
+          and '0x2' represents SoundWire 1.1 and so on.
+          MFD is 4 nibbles
+          PID is 4 nibbles
+          CID is 2 nibbles
+          More Information on detail of encoding of these fields can be
+          found in MIPI Alliance DisCo & SoundWire 1.0 Specifications.
+
+      reg:
+        maxItems: 1
+        description:
+          Link ID followed by Instance ID of SoundWire Device Address.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    soundwire at c2d0000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0c2d0000 0x2000>;
+
+        speaker at 0,1 {
+            compatible = "sdw10217201000";
+            reg = <0 1>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+        };
+
+        speaker at 0,2 {
+            compatible = "sdw10217201000";
+            reg = <0 2>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
+
+...
-- 
2.21.0