[alsa-devel] [PATCH v3 1/4] dt-bindings: soundwire: add slave bindings

[Vinod Koul]

On 09-08-19, 14:34, Srinivas Kandagatla wrote:
> This patch adds bindings for Soundwire Slave devices that includes how
> SoundWire enumeration address and Link ID are used to represented in
> SoundWire slave device tree nodes.

Rob does this look good to you, I intent to apply the soundwire parts

> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> ---
>  .../devicetree/bindings/soundwire/slave.txt   | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soundwire/slave.txt
> 
> diff --git a/Documentation/devicetree/bindings/soundwire/slave.txt b/Documentation/devicetree/bindings/soundwire/slave.txt
> new file mode 100644
> index 000000000000..201f65d2fafa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soundwire/slave.txt
> @@ -0,0 +1,51 @@
> +SoundWire slave device bindings.
> +
> +SoundWire is a 2-pin multi-drop interface with data and clock line.
> +It facilitates development of low cost, efficient, high performance systems.
> +
> +SoundWire slave devices:
> +Every SoundWire controller node can contain zero or more child nodes
> +representing slave devices on the bus. Every SoundWire slave device is
> +uniquely determined by the enumeration address containing 5 fields:
> +SoundWire Version, Instance ID, Manufacturer ID, Part ID
> +and Class ID for a device. Addition to below required properties,
> +child nodes can have device specific bindings.
> +
> +Required properties:
> +- compatible:	 "sdw<LinkID><VersionID><InstanceID><MFD><PID><CID>".
> +		  Is the textual representation of SoundWire Enumeration
> +		  address along with Link ID. compatible string should contain
> +		  SoundWire Link ID, SoundWire Version ID, Instance ID,
> +		  Manufacturer ID, Part ID and Class ID in order
> +		  represented as above and shall be in lower-case hexadecimal
> +		  with leading zeroes. Vaild sizes of these fields are
> +		  LinkID is 1 nibble,
> +		  Version ID is 1 nibble
> +		  Instance ID in 1 nibble
> +		  MFD in 4 nibbles
> +		  PID in 4 nibbles
> +		  CID is 2 nibbles
> +
> +		  Version number '0x1' represents SoundWire 1.0
> +		  Version number '0x2' represents SoundWire 1.1
> +		  ex: "sdw0110217201000" represents 0 LinkID,
> +		  SoundWire 1.0 version slave with Instance ID 1.
> +		  More Information on detail of encoding of these fields can be
> +		  found in MIPI Alliance DisCo & SoundWire 1.0 Specifications.
> +
> +SoundWire example for Qualcomm's SoundWire controller:
> +
> +soundwire at c2d0000 {
> +	compatible = "qcom,soundwire-v1.5.0"
> +	reg = <0x0c2d0000 0x2000>;
> +
> +	spkr_left:wsa8810-left{
> +		compatible = "sdw0110217201000";
> +		...
> +	};
> +
> +	spkr_right:wsa8810-right{
> +		compatible = "sdw0120217201000";
> +		...
> +	};
> +};
> -- 
> 2.21.0

-- 
~Vinod