[alsa-devel] [PATCH v5 04/15] ASoC: sun4i-i2s: Support more formats on newer SoCs

[Maxime Ripard]

On Wed, Aug 14, 2019 at 08:08:43AM +0200, codekipper at gmail.com wrote:
> From: Marcus Cooper <codekipper at gmail.com>
>
> There is a need to support more formats on the newer SoCs(H3 and later).
> Extend the formats supported to include DSP_A and DSP_B modes.
>
> Signed-off-by: Marcus Cooper <codekipper at gmail.com>
> ---
>  sound/soc/sunxi/sun4i-i2s.c | 87 +++++++++++++++++++++++++++----------
>  1 file changed, 63 insertions(+), 24 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index 34f31439ae7b..3553c17318b0 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -27,6 +27,8 @@
>  #define SUN4I_I2S_CTRL_MODE_MASK		BIT(5)
>  #define SUN4I_I2S_CTRL_MODE_SLAVE			(1 << 5)
>  #define SUN4I_I2S_CTRL_MODE_MASTER			(0 << 5)
> +#define SUN4I_I2S_CTRL_PCM			BIT(4)
> +#define SUN4I_I2S_CTRL_LOOP			BIT(3)
>  #define SUN4I_I2S_CTRL_TX_EN			BIT(2)
>  #define SUN4I_I2S_CTRL_RX_EN			BIT(1)
>  #define SUN4I_I2S_CTRL_GL_EN			BIT(0)
> @@ -91,6 +93,9 @@
>  /* Defines required for sun8i-h3 support */
>  #define SUN8I_I2S_CTRL_BCLK_OUT			BIT(18)
>  #define SUN8I_I2S_CTRL_LRCK_OUT			BIT(17)
> +#define SUN8I_I2S_CTRL_MODE_RIGHT_J			(2 << 0)
> +#define SUN8I_I2S_CTRL_MODE_I2S_LEFT_J			(1 << 0)
> +#define SUN8I_I2S_CTRL_MODE_PCM				(0 << 0)
>
>  #define SUN8I_I2S_FMT0_LRCK_PERIOD_MASK		GENMASK(17, 8)
>  #define SUN8I_I2S_FMT0_LRCK_PERIOD(period)	((period - 1) << 8)
> @@ -164,6 +169,7 @@ struct sun4i_i2s_quirks {
>
>  	s8	(*get_sr)(const struct sun4i_i2s *, int);
>  	s8	(*get_wss)(const struct sun4i_i2s *, int);
> +	int	(*set_format)(struct sun4i_i2s *, unsigned int);
>  };
>
>  struct sun4i_i2s {
> @@ -194,6 +200,7 @@ struct sun4i_i2s {
>
>  	unsigned int	tdm_slots;
>  	unsigned int	slot_width;
> +	unsigned int	offset;
>  };
>
>  struct sun4i_i2s_clk_div {
> @@ -484,19 +491,14 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
>  				      i2s->slot_width : params_width(params));
>  }
>
> -static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> +static int sun4i_i2s_set_format(struct sun4i_i2s *i2s, unsigned int fmt)
>  {
> -	struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>  	u32 val;
> -	u32 offset = 0;
> -	u32 bclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
> -	u32 lrclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
>
>  	/* DAI Mode */
>  	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>  	case SND_SOC_DAIFMT_I2S:
>  		val = SUN4I_I2S_FMT0_FMT_I2S;
> -		offset = 1;
>  		break;
>  	case SND_SOC_DAIFMT_LEFT_J:
>  		val = SUN4I_I2S_FMT0_FMT_LEFT_J;
> @@ -505,32 +507,64 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
>  		val = SUN4I_I2S_FMT0_FMT_RIGHT_J;
>  		break;
>  	default:
> -		dev_err(dai->dev, "Unsupported format: %d\n",
> -			fmt & SND_SOC_DAIFMT_FORMAT_MASK);
>  		return -EINVAL;
>  	}
>
> -	if (i2s->variant->has_chsel_offset) {
> -		/*
> -		 * offset being set indicates that we're connected to an i2s
> -		 * device, however offset is only used on the sun8i block and
> -		 * i2s shares the same setting with the LJ format. Increment
> -		 * val so that the bit to value to write is correct.
> -		 */
> -		if (offset > 0)
> -			val++;
> -		/* blck offset determines whether i2s or LJ */
> -		regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
> -				   SUN8I_I2S_TX_CHAN_OFFSET_MASK,
> -				   SUN8I_I2S_TX_CHAN_OFFSET(offset));
> +	regmap_field_write(i2s->field_fmt_mode, val);
> +
> +	return 0;
> +}
> +
> +static int sun8i_i2s_set_format(struct sun4i_i2s *i2s, unsigned int fmt)
> +{
> +	u32 val;
>
> -		regmap_update_bits(i2s->regmap, SUN8I_I2S_RX_CHAN_SEL_REG,
> -				   SUN8I_I2S_TX_CHAN_OFFSET_MASK,
> -				   SUN8I_I2S_TX_CHAN_OFFSET(offset));
> +	/* DAI Mode */
> +	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> +	case SND_SOC_DAIFMT_I2S:
> +		i2s->offset = 1;
> +	case SND_SOC_DAIFMT_LEFT_J:
> +		val = SUN8I_I2S_CTRL_MODE_I2S_LEFT_J;
> +		break;
> +	case SND_SOC_DAIFMT_RIGHT_J:
> +		val = SUN8I_I2S_CTRL_MODE_RIGHT_J;
> +		break;
> +	case SND_SOC_DAIFMT_DSP_A:
> +		i2s->offset = 1;
> +	case SND_SOC_DAIFMT_DSP_B:
> +		val = SUN8I_I2S_CTRL_MODE_PCM;
> +		break;
> +
> +	default:
> +		return -EINVAL;
>  	}
>
> +	/*
> +	 * bclk offset determines whether i2s or LJ if in i2s mode and
> +	 * DSP_A or DSP_B if in PCM mode.
> +	 */
> +	i2s->variant->set_txchanoffset(i2s, 0);
> +	i2s->variant->set_rxchanoffset(i2s);
> +
>  	regmap_field_write(i2s->field_fmt_mode, val);

It's a bit more complicated in the sun8i case. The LRCK period also
needs to be changed when in PCM / DSP_* mode since it changes from a
number of periods for one channel to a number of periods for all the
channels.

I have patches that still need a bit of rework and take care of all of
that, I'll try to post them by the end of the week

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20190814/7381b9a3/attachment.sig>