[alsa-devel] [PATCH v2 3/3] ASoC: rt5677: fall back to DT prop names on error
Fletcher Woodruff
fletcherw at chromium.org
Fri Apr 5 22:42:57 CEST 2019
The rt5677 driver uses ACPI-style property names to read from the
device API. However, these do not match the property names in _DSD
used on the Chromebook Pixel 2015, which are closer to the Device Tree
style. Unify the two functions for reading from the device API so that
they try ACPI-style names first and fall back to the DT names on error.
Signed-off-by: Fletcher Woodruff <fletcherw at chromium.org>
---
sound/soc/codecs/rt5677.c | 74 +++++++++++++++++++--------------------
1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 6bff0df53c6c6b..38e99580f09acd 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -4998,48 +4998,50 @@ static const struct acpi_device_id rt5677_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, rt5677_acpi_match);
-static void rt5677_read_acpi_properties(struct rt5677_priv *rt5677,
+static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
struct device *dev)
{
u32 val;
- if (!device_property_read_u32(dev, "DCLK", &val))
- rt5677->pdata.dmic2_clk_pin = val;
+ rt5677->pdata.in1_diff =
+ device_property_read_bool(dev, "IN1") ||
+ device_property_read_bool(dev, "realtek,in1-differential");
- rt5677->pdata.in1_diff = device_property_read_bool(dev, "IN1");
- rt5677->pdata.in2_diff = device_property_read_bool(dev, "IN2");
- rt5677->pdata.lout1_diff = device_property_read_bool(dev, "OUT1");
- rt5677->pdata.lout2_diff = device_property_read_bool(dev, "OUT2");
- rt5677->pdata.lout3_diff = device_property_read_bool(dev, "OUT3");
+ rt5677->pdata.in2_diff =
+ device_property_read_bool(dev, "IN2") ||
+ device_property_read_bool(dev, "realtek,in2-differential");
- device_property_read_u32(dev, "JD1", &rt5677->pdata.jd1_gpio);
- device_property_read_u32(dev, "JD2", &rt5677->pdata.jd2_gpio);
- device_property_read_u32(dev, "JD3", &rt5677->pdata.jd3_gpio);
-}
+ rt5677->pdata.lout1_diff =
+ device_property_read_bool(dev, "OUT1") ||
+ device_property_read_bool(dev, "realtek,lout1-differential");
-static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
- struct device *dev)
-{
- rt5677->pdata.in1_diff = device_property_read_bool(dev,
- "realtek,in1-differential");
- rt5677->pdata.in2_diff = device_property_read_bool(dev,
- "realtek,in2-differential");
- rt5677->pdata.lout1_diff = device_property_read_bool(dev,
- "realtek,lout1-differential");
- rt5677->pdata.lout2_diff = device_property_read_bool(dev,
- "realtek,lout2-differential");
- rt5677->pdata.lout3_diff = device_property_read_bool(dev,
- "realtek,lout3-differential");
+ rt5677->pdata.lout2_diff =
+ device_property_read_bool(dev, "OUT2") ||
+ device_property_read_bool(dev, "realtek,lout2-differential");
+
+ rt5677->pdata.lout3_diff =
+ device_property_read_bool(dev, "OUT3") ||
+ device_property_read_bool(dev, "realtek,lout3-differential");
device_property_read_u8_array(dev, "realtek,gpio-config",
- rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
-
- device_property_read_u32(dev, "realtek,jd1-gpio",
- &rt5677->pdata.jd1_gpio);
- device_property_read_u32(dev, "realtek,jd2-gpio",
- &rt5677->pdata.jd2_gpio);
- device_property_read_u32(dev, "realtek,jd3-gpio",
- &rt5677->pdata.jd3_gpio);
+ rt5677->pdata.gpio_config,
+ RT5677_GPIO_NUM);
+
+ if (!device_property_read_u32(dev, "DCLK", &val) ||
+ !device_property_read_u32(dev, "realtek,dmic2_clk_pin", &val))
+ rt5677->pdata.dmic2_clk_pin = val;
+
+ if (!device_property_read_u32(dev, "JD1", &val) ||
+ !device_property_read_u32(dev, "realtek,jd1-gpio", &val))
+ rt5677->pdata.jd1_gpio = val;
+
+ if (!device_property_read_u32(dev, "JD2", &val) ||
+ !device_property_read_u32(dev, "realtek,jd2-gpio", &val))
+ rt5677->pdata.jd2_gpio = val;
+
+ if (!device_property_read_u32(dev, "JD3", &val) ||
+ !device_property_read_u32(dev, "realtek,jd3-gpio", &val))
+ rt5677->pdata.jd3_gpio = val;
}
struct rt5677_irq_desc {
@@ -5284,20 +5286,18 @@ static int rt5677_i2c_probe(struct i2c_client *i2c)
match_id = of_match_device(rt5677_of_match, &i2c->dev);
if (match_id)
rt5677->type = (enum rt5677_type)match_id->data;
-
- rt5677_read_device_properties(rt5677, &i2c->dev);
} else if (ACPI_HANDLE(&i2c->dev)) {
const struct acpi_device_id *acpi_id;
acpi_id = acpi_match_device(rt5677_acpi_match, &i2c->dev);
if (acpi_id)
rt5677->type = (enum rt5677_type)acpi_id->driver_data;
-
- rt5677_read_acpi_properties(rt5677, &i2c->dev);
} else {
return -EINVAL;
}
+ rt5677_read_device_properties(rt5677, &i2c->dev);
+
/* pow-ldo2 and reset are optional. The codec pins may be statically
* connected on the board without gpios. If the gpio device property
* isn't specified, devm_gpiod_get_optional returns NULL.
--
2.21.0.392.gf8f6787159e-goog
More information about the Alsa-devel
mailing list