[alsa-devel] [PATCH v4 11/14] ASoC: wcd9335: add mbhc support
srinivas.kandagatla at linaro.org
srinivas.kandagatla at linaro.org
Mon Sep 17 02:57:24 CEST 2018
From: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
sound/soc/codecs/wcd9335.c | 268 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 266 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index efbb698..6c95cff 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -11,6 +11,7 @@
#include <linux/regulator/consumer.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <sound/jack.h>
#include <linux/kernel.h>
#include <linux/slimbus.h>
#include <sound/soc.h>
@@ -89,12 +90,18 @@
#define CF_MIN_3DB_75HZ 0x1
#define CF_MIN_3DB_150HZ 0x2
+#define WCD9335_MBHC_MAX_BUTTONS (8)
+
#define WCD9335_SLIM_RX_CH(p) \
{.port = p + WCD9335_RX_START, .shift = p,}
#define WCD9335_SLIM_TX_CH(p) \
{.port = p, .shift = p,}
+static int btn_mask = SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3 | SND_JACK_BTN_4;
+static int hs_jack_mask = SND_JACK_HEADPHONE | SND_JACK_HEADSET;
+
/* vout step value */
#define WCD9335_CALCULATE_VOUT_D(req_mv) (((req_mv - 650) * 10) / 25)
@@ -323,6 +330,16 @@ struct wcd9335_codec {
u32 num_rx_port;
u32 num_tx_port;
+ struct snd_soc_jack *jack;
+ bool hphl_jack_type_normally_open;
+ bool gnd_jack_type_normally_open;
+ bool mbhc_btn_enabled;
+ int mbhc_btn0_released;
+ bool detect_accessory_type;
+ int accessory_type;
+ /* Voltage threshold for button detection */
+ u32 vref_btn[WCD9335_MBHC_MAX_BUTTONS];
+
int sido_input_src;
enum wcd9335_sido_voltage sido_voltage;
@@ -2829,7 +2846,6 @@ static int wcd9335_codec_enable_dec(struct snd_soc_dapm_widget *w,
break;
case SND_SOC_DAPM_POST_PMU:
snd_soc_component_update_bits(comp, hpf_gate_reg, 0x01, 0x00);
-
if (decimator == 0) {
snd_soc_component_write(comp,
WCD9335_MBHC_ZDET_RAMP_CTL, 0x83);
@@ -2840,7 +2856,6 @@ static int wcd9335_codec_enable_dec(struct snd_soc_dapm_widget *w,
snd_soc_component_write(comp,
WCD9335_MBHC_ZDET_RAMP_CTL, 0x03);
}
-
snd_soc_component_update_bits(comp, hpf_gate_reg,
0x01, 0x01);
snd_soc_component_update_bits(comp, tx_vol_ctl_reg,
@@ -3988,6 +4003,131 @@ static int wcd9335_codec_enable_ear_pa(struct snd_soc_dapm_widget *w,
return ret;
}
+static irqreturn_t wcd9335_mbhc_sw_irq(int irq, void *data)
+{
+ struct wcd9335_codec *wcd = data;
+ struct snd_soc_component *component = wcd->component;
+ bool ins = false;
+
+ if (snd_soc_component_read32(component, WCD9335_ANA_MBHC_MECH) &
+ WCD9335_MBHC_MECH_DETECT_TYPE_MASK)
+ ins = true;
+
+ /* Set the detection type appropriately */
+ snd_soc_component_update_bits(component, WCD9335_ANA_MBHC_MECH,
+ WCD9335_MBHC_MECH_DETECT_TYPE_MASK,
+ (!ins << WCD9335_MBHC_MECH_DETECT_TYPE_SHIFT));
+
+ if (ins) { /* hs insertion */
+ u32 btndet_curr_src;
+
+ /*
+ * If no micbias is enabled, then enable 100uA internal
+ * current source for Button detection
+ */
+ if (snd_soc_component_read32(component, WCD9335_ANA_MICB2) &
+ WCD9335_ANA_MICB2_ENABLE)
+ btndet_curr_src = WCD9335_ANA_MBHC_BD_ISRC_OFF;
+ else
+ btndet_curr_src = WCD9335_ANA_MBHC_BD_ISRC_100UA;
+
+ snd_soc_component_update_bits(component,
+ WCD9335_ANA_MBHC_ELECT,
+ WCD9335_ANA_MBHC_BD_ISRC_CTL_MASK,
+ btndet_curr_src);
+
+ /*
+ * if only a btn0 press event is receive just before
+ * insert event then its a 3 pole headphone else if
+ * both press and release event received then its
+ * a headset.
+ */
+ if (wcd->mbhc_btn0_released) {
+ snd_soc_jack_report(wcd->jack,
+ SND_JACK_HEADSET, hs_jack_mask);
+ wcd->accessory_type = SND_JACK_HEADSET;
+ } else {
+ snd_soc_jack_report(wcd->jack,
+ SND_JACK_HEADPHONE, hs_jack_mask);
+ wcd->accessory_type = SND_JACK_HEADPHONE;
+ }
+
+ wcd->detect_accessory_type = false;
+
+ } else { /* removal */
+ snd_soc_jack_report(wcd->jack, 0, hs_jack_mask);
+ wcd->detect_accessory_type = true;
+ wcd->mbhc_btn0_released = false;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wcd9335_mbhc_btn_press_irq(int irq, void *data)
+{
+ struct wcd9335_codec *wcd = data;
+ struct snd_soc_component *comp = wcd->component;
+ u32 btn_result, result;
+
+ /* do not handle any button events for headset without buttons */
+ if (wcd->accessory_type == SND_JACK_HEADPHONE)
+ return IRQ_HANDLED;
+
+ result = snd_soc_component_read32(comp, WCD9335_ANA_MBHC_RESULT_3);
+ btn_result = result & WCD9335_MBHC_BTN_RESULT_MASK;
+
+ switch (btn_result) {
+ case 0xf:
+ snd_soc_jack_report(wcd->jack, SND_JACK_BTN_4, btn_mask);
+ break;
+ case 0x4:
+ snd_soc_jack_report(wcd->jack, SND_JACK_BTN_4, btn_mask);
+ break;
+ case 0x3:
+ snd_soc_jack_report(wcd->jack, SND_JACK_BTN_3, btn_mask);
+ break;
+ case 0x2:
+ snd_soc_jack_report(wcd->jack, SND_JACK_BTN_2, btn_mask);
+ break;
+ case 0x1:
+ snd_soc_jack_report(wcd->jack, SND_JACK_BTN_1, btn_mask);
+ break;
+ case 0x0:
+ /* handle BTN_0 specially for type detection */
+ if (!wcd->detect_accessory_type)
+ snd_soc_jack_report(wcd->jack,
+ SND_JACK_BTN_0, btn_mask);
+ break;
+ default:
+ dev_err(comp->dev,
+ "Unexpected button press result (%x)", btn_result);
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wcd9335_mbhc_bt_rel_irq(int irq, void *data)
+{
+ struct wcd9335_codec *wcd = data;
+
+
+ if (wcd->detect_accessory_type) {
+ u32 result = snd_soc_component_read32(wcd->component,
+ WCD9335_ANA_MBHC_RESULT_3);
+
+ /* check if its BTN0 thats released */
+ if (!(result & WCD9335_MBHC_BTN_RESULT_MASK))
+ wcd->mbhc_btn0_released = true;
+
+ } else {
+ if (wcd->accessory_type != SND_JACK_HEADPHONE)
+ snd_soc_jack_report(wcd->jack, 0, btn_mask);
+ }
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t wcd9335_slimbus_irq(int irq, void *data)
{
struct wcd9335_codec *wcd = data;
@@ -4057,11 +4197,95 @@ static irqreturn_t wcd9335_slimbus_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static void wcd9335_program_btn_threshold(struct wcd9335_codec *wcd)
+{
+ int i, vth;
+
+ for (i = 0; i < WCD9335_MBHC_MAX_BUTTONS; i++) {
+ vth = ((wcd->vref_btn[i] * 2) / 25) & 0x3F;
+ snd_soc_component_update_bits(wcd->component,
+ WCD9335_ANA_MBHC_BTN0 + i,
+ 0xFC, vth << 2);
+ }
+}
+
+static void wcd9335_mbhc_initialise(struct wcd9335_codec *wcd)
+{
+ struct snd_soc_component *comp = wcd->component;
+ u32 plug_type = 0;
+
+ snd_soc_component_update_bits(comp, WCD9335_MBHC_PLUG_DETECT_CTL,
+ WCD9335_MBHC_HSDET_PULLUP_CTL_MASK,
+ WCD9335_MBHC_HSDET_PULLUP_CTL_1_2P0_UA);
+
+ if (wcd->hphl_jack_type_normally_open)
+ plug_type |= WCD9335_MBHC_HPHL_PLUG_TYPE_NO;
+
+ if (wcd->gnd_jack_type_normally_open)
+ plug_type |= WCD9335_MBHC_GND_PLUG_TYPE_NO;
+
+ snd_soc_component_write(wcd->component, WCD9335_ANA_MBHC_MECH,
+ plug_type |
+ WCD9335_MBHC_L_DET_EN |
+ WCD9335_MBHC_HSL_PULLUP_COMP_EN |
+ WCD9335_MBHC_HPHL_100K_TO_GND_EN);
+
+ /* Insertion debounce set to 96ms */
+ snd_soc_component_write(wcd->component,
+ WCD9335_MBHC_PLUG_DETECT_CTL,
+ WCD9335_MBHC_DBNC_TIMER_INSREM_DBNC_T_96_MS|
+ WCD9335_MBHC_HSDET_PULLUP_CTL_1_2P0_UA);
+ /* Button Debounce set to 16ms */
+ snd_soc_component_update_bits(wcd->component, WCD9335_MBHC_CTL_1,
+ WCD9335_MBHC_BTN_DBNC_MASK,
+ WCD9335_MBHC_BTN_DBNC_T_16_MS);
+
+ /* enable bias distribution control */
+ snd_soc_component_update_bits(comp, WCD9335_ANA_MBHC_ELECT,
+ WCD9335_ANA_MBHC_BIAS_EN_MASK,
+ WCD9335_ANA_MBHC_BIAS_EN);
+
+ snd_soc_component_update_bits(wcd->component,
+ WCD9335_ANA_MBHC_ELECT,
+ WCD9335_ANA_MBHC_BD_ISRC_CTL_MASK,
+ WCD9335_ANA_MBHC_BD_ISRC_100UA);
+
+ /* enable MBHC clock */
+ snd_soc_component_update_bits(wcd->component, WCD9335_MBHC_CTL_1,
+ WCD9335_MBHC_CTL_RCO_EN_MASK,
+ WCD9335_MBHC_CTL_RCO_EN);
+
+ snd_soc_component_update_bits(wcd->component, WCD9335_MBHC_CTL_2,
+ WCD9335_MBHC_HS_VREF_CTL_MASK,
+ WCD9335_MBHC_HS_VREF_1P5_V);
+
+ /* program HS_VREF value */
+ wcd9335_program_btn_threshold(wcd);
+ /* Start FSM */
+ snd_soc_component_update_bits(wcd->component, WCD9335_ANA_MBHC_ELECT,
+ BIT(7), BIT(7));
+
+ wcd->mbhc_btn0_released = false;
+ wcd->detect_accessory_type = true;
+}
+
static struct wcd9335_irq wcd9335_irqs[] = {
{
.irq = WCD9335_IRQ_SLIMBUS,
.handler = wcd9335_slimbus_irq,
.name = "SLIM Slave",
+ }, {
+ .irq = WCD9335_IRQ_MBHC_SW_DET,
+ .handler = wcd9335_mbhc_sw_irq,
+ .name = "Headset Mech Insert Removal",
+ }, {
+ .irq = WCD9335_IRQ_MBHC_BUTTON_PRESS_DET,
+ .handler = wcd9335_mbhc_btn_press_irq,
+ .name = "Headset Button Press",
+ }, {
+ .irq = WCD9335_IRQ_MBHC_BUTTON_RELEASE_DET,
+ .handler = wcd9335_mbhc_bt_rel_irq,
+ .name = "Headset Button Release",
},
};
@@ -4859,6 +5083,7 @@ static void wcd9335_codec_init(struct snd_soc_component *component)
wcd9335_codec_reg_init[i].val);
wcd9335_enable_efuse_sensing(component);
+ wcd9335_mbhc_initialise(wcd);
}
static int wcd9335_codec_probe(struct snd_soc_component *component)
@@ -4914,10 +5139,21 @@ static int wcd9335_codec_set_sysclk(struct snd_soc_component *comp,
return clk_set_rate(wcd->mclk, freq);
}
+static int wcd9335_codec_set_jack(struct snd_soc_component *comp,
+ struct snd_soc_jack *jack, void *data)
+{
+ struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev);
+
+ wcd->jack = jack;
+
+ return 0;
+}
+
static const struct snd_soc_component_driver wcd9335_component_drv = {
.probe = wcd9335_codec_probe,
.remove = wcd9335_codec_remove,
.set_sysclk = wcd9335_codec_set_sysclk,
+ .set_jack = wcd9335_codec_set_jack,
.controls = wcd9335_snd_controls,
.num_controls = ARRAY_SIZE(wcd9335_snd_controls),
.dapm_widgets = wcd9335_dapm_widgets,
@@ -4926,6 +5162,33 @@ static const struct snd_soc_component_driver wcd9335_component_drv = {
.num_dapm_routes = ARRAY_SIZE(wcd9335_audio_map),
};
+static void of_parse_mbhc_data(struct device *dev, struct wcd9335_codec *wcd)
+{
+ int rval;
+
+ if (of_property_read_bool(dev->of_node,
+ "qcom,hphl-jack-type-normally-open"))
+ wcd->hphl_jack_type_normally_open = true;
+ else
+ wcd->hphl_jack_type_normally_open = false;
+
+ if (of_property_read_bool(dev->of_node,
+ "qcom,gnd-jack-type-normally-open"))
+ wcd->gnd_jack_type_normally_open = true;
+ else
+ wcd->gnd_jack_type_normally_open = false;
+
+ wcd->mbhc_btn_enabled = true;
+ rval = of_property_read_u32_array(dev->of_node,
+ "qcom,mbhc-vthreshold",
+ &wcd->vref_btn[0],
+ WCD9335_MBHC_MAX_BUTTONS);
+ if (rval < 0) {
+ wcd->mbhc_btn_enabled = false;
+ dev_err(dev, "MBHC btn detection disabled\n");
+ }
+}
+
static int wcd9335_probe(struct platform_device *pdev)
{
struct wcd9335 *pdata = dev_get_drvdata(pdev->dev.parent);
@@ -4937,6 +5200,7 @@ static int wcd9335_probe(struct platform_device *pdev)
return -ENOMEM;
dev_set_drvdata(dev, wcd);
+ of_parse_mbhc_data(pdev->dev.parent, wcd);
memcpy(wcd->rx_chs, wcd9335_rx_chs, sizeof(wcd9335_rx_chs));
memcpy(wcd->tx_chs, wcd9335_tx_chs, sizeof(wcd9335_tx_chs));
--
2.9.3
More information about the Alsa-devel
mailing list