[alsa-devel] [PATCH v2] ASoC: pcm3168a: remove read-only status register from snd_kcontrol_new

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

"DACn Zero Flag" and "ADCn Overflow Flag" are read-only status
register. There is no detail explanation for these register on
datasheet, but, judging from its behavior, it seems these register
needs clock to read. Otherwise, I2C returns error.
Therefor, amixer command will be failed under non working timing.
These information are needed for driver, not for user.
So, let's remove these from snd_kcontrol_new.

Without this patch, user often fail amixer command.
This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
v1 -> v2

	- removed directly, instead of using #if 0
	- tidyup git-log

 sound/soc/codecs/pcm3168a.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/sound/soc/codecs/pcm3168a.c b/sound/soc/codecs/pcm3168a.c
index 52cc950..e1c3a18 100644
--- a/sound/soc/codecs/pcm3168a.c
+++ b/sound/soc/codecs/pcm3168a.c
@@ -133,10 +133,6 @@ static const struct snd_kcontrol_new pcm3168a_snd_controls[] = {
 	SOC_DOUBLE("DAC2 Invert Switch", PCM3168A_DAC_INV, 2, 3, 1, 0),
 	SOC_DOUBLE("DAC3 Invert Switch", PCM3168A_DAC_INV, 4, 5, 1, 0),
 	SOC_DOUBLE("DAC4 Invert Switch", PCM3168A_DAC_INV, 6, 7, 1, 0),
-	SOC_DOUBLE_STS("DAC1 Zero Flag", PCM3168A_DAC_ZERO, 0, 1, 1, 0),
-	SOC_DOUBLE_STS("DAC2 Zero Flag", PCM3168A_DAC_ZERO, 2, 3, 1, 0),
-	SOC_DOUBLE_STS("DAC3 Zero Flag", PCM3168A_DAC_ZERO, 4, 5, 1, 0),
-	SOC_DOUBLE_STS("DAC4 Zero Flag", PCM3168A_DAC_ZERO, 6, 7, 1, 0),
 	SOC_ENUM("DAC Volume Control Type", pcm3168a_dac_volume_type),
 	SOC_ENUM("DAC Volume Rate Multiplier", pcm3168a_dac_att_mult),
 	SOC_ENUM("DAC De-Emphasis", pcm3168a_dac_demp),
@@ -176,9 +172,6 @@ static const struct snd_kcontrol_new pcm3168a_snd_controls[] = {
 	SOC_DOUBLE("ADC1 Mute Switch", PCM3168A_ADC_MUTE, 0, 1, 1, 0),
 	SOC_DOUBLE("ADC2 Mute Switch", PCM3168A_ADC_MUTE, 2, 3, 1, 0),
 	SOC_DOUBLE("ADC3 Mute Switch", PCM3168A_ADC_MUTE, 4, 5, 1, 0),
-	SOC_DOUBLE_STS("ADC1 Overflow Flag", PCM3168A_ADC_OV, 0, 1, 1, 0),
-	SOC_DOUBLE_STS("ADC2 Overflow Flag", PCM3168A_ADC_OV, 2, 3, 1, 0),
-	SOC_DOUBLE_STS("ADC3 Overflow Flag", PCM3168A_ADC_OV, 4, 5, 1, 0),
 	SOC_ENUM("ADC Volume Control Type", pcm3168a_adc_volume_type),
 	SOC_ENUM("ADC Volume Rate Multiplier", pcm3168a_adc_att_mult),
 	SOC_ENUM("ADC Overflow Flag Polarity", pcm3168a_adc_ov_pol),
-- 
2.7.4