[alsa-devel] [PATCH] ASoC: rsnd: tidyup SSICR::SWSP for TDM

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

R-Car datasheet is indicating that WS output settings of SSICR::SWSP
is inverted on TDM mode from non TDM mode settings.
But, it is meaning that TDM should use 0 here.
Without this patch, sound input/output 1ch will be 2ch, 2ch will be 3ch
..., be jumbled on I2S + TDM settings. This patch fixup it.
This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 sound/soc/sh/rcar/ssi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index b42a0e0..fcb4df2 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -392,7 +392,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
 
 	if (rdai->bit_clk_inv)
 		cr_own |= SCKP;
-	if (rdai->frm_clk_inv ^ is_tdm)
+	if (rdai->frm_clk_inv && !is_tdm)
 		cr_own |= SWSP;
 	if (rdai->data_alignment)
 		cr_own |= SDTA;
-- 
2.7.4