[alsa-devel] Microphone detected, but no output for all ASUS G751xx with ALC668 chipset
Håvard
hovardslill at gmail.com
Mon Oct 8 14:08:49 CEST 2018
And the mic configuration mentioned here in comment #3 seems to work:
https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/261148
I am "Hiklo" in the last comment of the thread.
-Håvard
Den man. 8. okt. 2018 kl. 14:05 skrev Håvard <hovardslill at gmail.com>:
> I am sorry for replying once again, but since we are already fixing this,
> we might as well look into another one.
>
> Many people are reporting that the headphone out port (wich is also an
> SPDIF out port) is not working. I can get it working by overriding pin 0x16
> to Headphone in hdajackretask, but this makes the internal speakers useless.
>
> Reports online of this issue:
> https://bugzilla.kernel.org/show_bug.cgi?id=190681
> https://bugzilla.kernel.org/show_bug.cgi?id=106771 <- - Interesting
> discussion
> https://ubuntuforums.org/archive/index.php/t-2261149.html
>
> https://rog.asus.com/forum/showthread.php?59557-Asus-G751JY-No-sound-on-Linux-Mint-17-1-Cinnamon
> <-- Links to previous
> https://bbs.archlinux.org/viewtopic.php?id=213137
>
> And, as mentioned in the last link, setting model=asus-mode5 seems to fix
> that issue.
>
>
> I know this is much to ask, but could you take a look at this as well? It
> seems to affect a lot of people - I have been avoiding it by plugging my
> headset in the line out port, but that should be a last resort option.
>
> -Håvard
>
> Den lør. 6. okt. 2018 kl. 20:31 skrev Håvard <hovardslill at gmail.com>:
>
>> OK!
>>
>> Thank you very much for all that you have done!!
>>
>> I am looking forward to seeing this in (probably) the 4.20 kernel!
>>
>> -Håvard
>>
>> Den lør. 6. okt. 2018 kl. 15:57 skrev Takashi Iwai <tiwai at suse.de>:
>>
>>> On Sat, 06 Oct 2018 10:20:37 +0200,
>>> Håvard wrote:
>>> >
>>> > Ok!
>>> >
>>> > Thank you very much!
>>> >
>>> > So for them to work, they have to set model=asus-g751 ?
>>>
>>> They can test in that way, and they need to report their PCI SSIDs for
>>> applying the quirk as default.
>>>
>>>
>>> Takashi
>>>
>>> > Sorry for all these questions, but I want to respond to these people as
>>> > fast as possible!
>>> >
>>> > -Håvard
>>> >
>>> > Den lør. 6. okt. 2018 kl. 08:55 skrev Takashi Iwai <tiwai at suse.de>:
>>> >
>>> > > On Fri, 05 Oct 2018 21:56:20 +0200,
>>> > > Håvard wrote:
>>> > > >
>>> > > > I couldn't get the patch installed automatically, so I added the
>>> changed
>>> > > > code myself.
>>> > > >
>>> > > > Everything works fine and as expected right after reboot! :) Just
>>> like we
>>> > > > want!
>>> > > >
>>> > > > I don't understand. So this won't work for other G751xx users? Or
>>> do they
>>> > > > have to set model=asus-g751? I'm thinking of reaching out and
>>> saying it
>>> > > > will be fixed in 4.19.
>>> > >
>>> > > We need to know the exact PCI SSIDs for the matching models.
>>> > > Yours is 1043:12ff, and others might be different. They can be added
>>> > > eventually to the quirk table in the same way once when we are
>>> > > informed.
>>> > >
>>> > > Since it's already a very late stage for 4.19, this fix will go into
>>> > > 4.20 at earliest.
>>> > >
>>> > >
>>> > > thanks,
>>> > >
>>> > > Takashi
>>> > >
>>> > > >
>>> > > > Thank you!
>>> > > >
>>> > > > -Håvard
>>> > > >
>>> > > > Den fre. 5. okt. 2018 kl. 14:46 skrev Takashi Iwai <tiwai at suse.de
>>> >:
>>> > > >
>>> > > > > On Fri, 05 Oct 2018 12:31:37 +0200,
>>> > > > > Håvard wrote:
>>> > > > > >
>>> > > > > > Thank you so much!
>>> > > > > >
>>> > > > > > Will this work for all G751 models, and will this be in the
>>> 4.19
>>> > > kernel?
>>> > > > >
>>> > > > > It's only for yours (the matching PCI SSID). And it will be
>>> included
>>> > > > > only when you test the patch and confirm it working. So, please
>>> test
>>> > > > > it at first. Then I'll merge after the test rest.
>>> > > > >
>>> > > > >
>>> > > > > thanks,
>>> > > > >
>>> > > > > Takashi
>>> > > > >
>>> > > > >
>>> > > > > > I am very thankful for all your hard work!!
>>> > > > > >
>>> > > > > > -Håvard
>>> > > > > >
>>> > > > > > Den fre. 5. okt. 2018 kl. 12:29 skrev Takashi Iwai <
>>> tiwai at suse.de>:
>>> > > > > >
>>> > > > > > > On Fri, 05 Oct 2018 12:10:52 +0200,
>>> > > > > > > Håvard wrote:
>>> > > > > > > >
>>> > > > > > > > I'll try to answer your previous email first.
>>> > > > > > > >
>>> > > > > > > > Everything seems identical to how it was in the 4.18-gentoo
>>> > > kernel
>>> > > > > when
>>> > > > > > > not
>>> > > > > > > > setting the model=alc668-headset option
>>> > > > > > > >
>>> > > > > > > > And using the trick we found:
>>> > > > > > > >
>>> > > > > > > > ./hda-verb /dev/snd/hwC0D0 0x20 0x500 0xc3
>>> > > > > > > > ./hda-verb /dev/snd/hwC0D0 0x20 0x440 0x00
>>> > > > > > >
>>> > > > > > > OK, then the following patch may work. Give it a try.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > > Made it so loopback worked perfectly fine for both
>>> earpieces.
>>> > > > > > > >
>>> > > > > > > > One curiosity however (this is just a small thing) is that
>>> the
>>> > > > > "base" mic
>>> > > > > > > > level is far lower than when the "Mic" option in alsamixer
>>> is
>>> > > set to
>>> > > > > > > 100. I
>>> > > > > > > > don't know if it was this way in 4.18-gentoo, but that's
>>> the only
>>> > > > > thing
>>> > > > > > > > that doesnt seem correct.
>>> > > > > > > > Here is a screenshot explaining it:
>>> > > > > > > > http://i.imgur.com/dKPELX6.png
>>> > > > > > >
>>> > > > > > > The Mic volume is only for analog loopback, so it can be
>>> normal.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Takashi
>>> > > > > > >
>>> > > > > > > ---
>>> > > > > > > --- a/sound/pci/hda/patch_realtek.c
>>> > > > > > > +++ b/sound/pci/hda/patch_realtek.c
>>> > > > > > > @@ -7738,6 +7738,7 @@ enum {
>>> > > > > > > ALC662_FIXUP_ASUS_Nx50,
>>> > > > > > > ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
>>> > > > > > > ALC668_FIXUP_ASUS_Nx51,
>>> > > > > > > + ALC668_FIXUP_ASUS_G751,
>>> > > > > > > ALC891_FIXUP_HEADSET_MODE,
>>> > > > > > > ALC891_FIXUP_DELL_MIC_NO_PRESENCE,
>>> > > > > > > ALC662_FIXUP_ACER_VERITON,
>>> > > > > > > @@ -8007,6 +8008,14 @@ static const struct hda_fixup
>>> > > alc662_fixups[] =
>>> > > > > {
>>> > > > > > > .chained = true,
>>> > > > > > > .chain_id =
>>> ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
>>> > > > > > > },
>>> > > > > > > + [ALC668_FIXUP_ASUS_G751] = {
>>> > > > > > > + .type = HDA_FIXUP_VERBS,
>>> > > > > > > + .v.verbs = (const struct hda_verb[]) {
>>> > > > > > > + { 0x20, AC_VERB_SET_COEF_INDEX, 0xc3
>>> },
>>> > > > > > > + { 0x20, AC_VERB_SET_PROC_COEF,
>>> 0x4000 },
>>> > > > > > > + {}
>>> > > > > > > + },
>>> > > > > > > + },
>>> > > > > > > [ALC891_FIXUP_HEADSET_MODE] = {
>>> > > > > > > .type = HDA_FIXUP_FUNC,
>>> > > > > > > .v.func = alc_fixup_headset_mode,
>>> > > > > > > @@ -8080,6 +8089,7 @@ static const struct snd_pci_quirk
>>> > > > > alc662_fixup_tbl[]
>>> > > > > > > = {
>>> > > > > > > SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550",
>>> > > > > ALC662_FIXUP_ASUS_Nx50),
>>> > > > > > > SND_PCI_QUIRK(0x1043, 0x13df, "Asus N550JX",
>>> > > > > ALC662_FIXUP_BASS_1A),
>>> > > > > > > SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750",
>>> > > > > ALC662_FIXUP_ASUS_Nx50),
>>> > > > > > > + SND_PCI_QUIRK(0x1043, 0x12ff, "ASUS G751",
>>> > > > > ALC668_FIXUP_ASUS_G751),
>>> > > > > > > SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ",
>>> > > > > > > ALC662_FIXUP_BASS_MODE4_CHMAP),
>>> > > > > > > SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH",
>>> > > > > > > ALC662_FIXUP_BASS_16),
>>> > > > > > > SND_PCI_QUIRK(0x1043, 0x177d, "ASUS N551",
>>> > > > > ALC668_FIXUP_ASUS_Nx51),
>>> > > > > > > @@ -8184,6 +8194,7 @@ static const struct hda_model_fixup
>>> > > > > > > alc662_fixup_models[] = {
>>> > > > > > > {.id = ALC668_FIXUP_DELL_XPS13, .name =
>>> "dell-xps13"},
>>> > > > > > > {.id = ALC662_FIXUP_ASUS_Nx50, .name = "asus-nx50"},
>>> > > > > > > {.id = ALC668_FIXUP_ASUS_Nx51, .name = "asus-nx51"},
>>> > > > > > > + {.id = ALC668_FIXUP_ASUS_G751, .name = "asus-g751"},
>>> > > > > > > {.id = ALC891_FIXUP_HEADSET_MODE, .name =
>>> > > "alc891-headset"},
>>> > > > > > > {.id = ALC891_FIXUP_DELL_MIC_NO_PRESENCE, .name =
>>> > > > > > > "alc891-headset-multi"},
>>> > > > > > > {.id = ALC662_FIXUP_ACER_VERITON, .name =
>>> "acer-veriton"},
>>> > > > > > >
>>> > > > > > [2 <text/html; UTF-8 (quoted-printable)>]
>>> > > > > >
>>> > > > >
>>> > > > [2 <text/html; UTF-8 (quoted-printable)>]
>>> > > >
>>> > >
>>> > [2 <text/html; UTF-8 (quoted-printable)>]
>>> >
>>>
>>
More information about the Alsa-devel
mailing list