[alsa-devel] [PATCH 1/6] ASoC: qdsp6: dt-bindings: Add q6afe tdm dt binding

Srinivas Kandagatla srinivas.kandagatla at linaro.org
Tue May 29 12:18:28 CEST 2018


This patch adds bindings required for TDM ports on AFE.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
 .../devicetree/bindings/sound/qcom,q6afe.txt       | 68 ++++++++++++++++++
 include/dt-bindings/sound/qcom,q6afe.h             | 80 ++++++++++++++++++++++
 2 files changed, 148 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index 14335a08b963..bdbf87df8c0b 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -46,6 +46,53 @@ configuration of each dai. Must contain the following properties.
 	Definition: Must be list of serial data lines used by this dai.
 	should be one or more of the 1-4 sd lines.
 
+ - qcom,tdm-sync-mode:
+	Usage: required for tdm interface
+	Value type: <prop-encoded-array>
+	Definition: Synchronization mode.
+		0 - Short sync bit mode
+		1 - Long sync mode
+		2 - Short sync slot mode
+
+ - qcom,tdm-sync-src:
+	Usage: required for tdm interface
+	Value type: <prop-encoded-array>
+	Definition: Synchronization source.
+		0 - External source
+		1 - Internal source
+
+ - qcom,tdm-data-out:
+	Usage: required for tdm interface
+	Value type: <prop-encoded-array>
+	Definition: Data out signal to drive with other masters.
+		0 - Disable
+		1 - Enable
+
+ - qcom,tdm-invert-sync:
+	Usage: required for tdm interface
+	Value type: <prop-encoded-array>
+	Definition: Invert the sync.
+		0 - Normal
+		1 - Invert
+
+ - qcom,tdm-data-delay:
+	Usage: required for tdm interface
+	Value type: <prop-encoded-array>
+	Definition: Number of bit clock to delay data
+		with respect to sync edge.
+		0 - 0 bit clock cycle
+		1 - 1 bit clock cycle
+		2 - 2 bit clock cycle
+
+ - qcom,tdm-data-align:
+	Usage: required for tdm interface
+	Value type: <prop-encoded-array>
+	Definition: Indicate how data is packed
+		within the slot. For example, 32 slot width in case of
+		sample bit width is 24.
+		0 - MSB
+		1 - LSB
+
 = EXAMPLE
 
 q6afe at 4 {
@@ -61,6 +108,27 @@ q6afe at 4 {
 			reg = <1>;
 		};
 
+		tdm at 24 {
+			reg = <24>;
+			qcom,tdm-sync-mode = <1>:
+			qcom,tdm-sync-src = <1>;
+			qcom,tdm-data-out = <0>;
+			qcom,tdm-invert-sync = <1>;
+			qcom,tdm-data-delay = <1>;
+			qcom,tdm-data-align = <0>;
+
+		};
+
+		tdm at 25 {
+			reg = <25>;
+			qcom,tdm-sync-mode = <1>:
+			qcom,tdm-sync-src = <1>;
+			qcom,tdm-data-out = <0>;
+			qcom,tdm-invert-sync = <1>;
+			qcom,tdm-data-delay <1>:
+			qcom,tdm-data-align = <0>;
+		};
+
 		prim-mi2s-rx at 16 {
 			reg = <16>;
 			qcom,sd-lines = <1 3>;
diff --git a/include/dt-bindings/sound/qcom,q6afe.h b/include/dt-bindings/sound/qcom,q6afe.h
index e162045f5dc9..e2d3892240b8 100644
--- a/include/dt-bindings/sound/qcom,q6afe.h
+++ b/include/dt-bindings/sound/qcom,q6afe.h
@@ -26,6 +26,86 @@
 #define TERTIARY_MI2S_TX	21
 #define QUATERNARY_MI2S_RX	22
 #define QUATERNARY_MI2S_TX	23
+#define PRIMARY_TDM_RX_0	24
+#define PRIMARY_TDM_TX_0	25
+#define PRIMARY_TDM_RX_1	26
+#define PRIMARY_TDM_TX_1	27
+#define PRIMARY_TDM_RX_2	28
+#define PRIMARY_TDM_TX_2	29
+#define PRIMARY_TDM_RX_3	30
+#define PRIMARY_TDM_TX_3	31
+#define PRIMARY_TDM_RX_4	32
+#define PRIMARY_TDM_TX_4	33
+#define PRIMARY_TDM_RX_5	34
+#define PRIMARY_TDM_TX_5	35
+#define PRIMARY_TDM_RX_6	36
+#define PRIMARY_TDM_TX_6	37
+#define PRIMARY_TDM_RX_7	38
+#define PRIMARY_TDM_TX_7	39
+#define SECONDARY_TDM_RX_0	40
+#define SECONDARY_TDM_TX_0	41
+#define SECONDARY_TDM_RX_1	42
+#define SECONDARY_TDM_TX_1	43
+#define SECONDARY_TDM_RX_2	44
+#define SECONDARY_TDM_TX_2	45
+#define SECONDARY_TDM_RX_3	46
+#define SECONDARY_TDM_TX_3	47
+#define SECONDARY_TDM_RX_4	48
+#define SECONDARY_TDM_TX_4	49
+#define SECONDARY_TDM_RX_5	50
+#define SECONDARY_TDM_TX_5	51
+#define SECONDARY_TDM_RX_6	52
+#define SECONDARY_TDM_TX_6	53
+#define SECONDARY_TDM_RX_7	54
+#define SECONDARY_TDM_TX_7	55
+#define TERTIARY_TDM_RX_0	56
+#define TERTIARY_TDM_TX_0	57
+#define TERTIARY_TDM_RX_1	58
+#define TERTIARY_TDM_TX_1	59
+#define TERTIARY_TDM_RX_2	60
+#define TERTIARY_TDM_TX_2	61
+#define TERTIARY_TDM_RX_3	62
+#define TERTIARY_TDM_TX_3	63
+#define TERTIARY_TDM_RX_4	64
+#define TERTIARY_TDM_TX_4	65
+#define TERTIARY_TDM_RX_5	66
+#define TERTIARY_TDM_TX_5	67
+#define TERTIARY_TDM_RX_6	68
+#define TERTIARY_TDM_TX_6	69
+#define TERTIARY_TDM_RX_7	70
+#define TERTIARY_TDM_TX_7	71
+#define QUATERNARY_TDM_RX_0	72
+#define QUATERNARY_TDM_TX_0	73
+#define QUATERNARY_TDM_RX_1	74
+#define QUATERNARY_TDM_TX_1	75
+#define QUATERNARY_TDM_RX_2	76
+#define QUATERNARY_TDM_TX_2	77
+#define QUATERNARY_TDM_RX_3	78
+#define QUATERNARY_TDM_TX_3	79
+#define QUATERNARY_TDM_RX_4	80
+#define QUATERNARY_TDM_TX_4	81
+#define QUATERNARY_TDM_RX_5	82
+#define QUATERNARY_TDM_TX_5	83
+#define QUATERNARY_TDM_RX_6	84
+#define QUATERNARY_TDM_TX_6	85
+#define QUATERNARY_TDM_RX_7	86
+#define QUATERNARY_TDM_TX_7	87
+#define QUINARY_TDM_RX_0	88
+#define QUINARY_TDM_TX_0	89
+#define QUINARY_TDM_RX_1	90
+#define QUINARY_TDM_TX_1	91
+#define QUINARY_TDM_RX_2	92
+#define QUINARY_TDM_TX_2	93
+#define QUINARY_TDM_RX_3	94
+#define QUINARY_TDM_TX_3	95
+#define QUINARY_TDM_RX_4	96
+#define QUINARY_TDM_TX_4	97
+#define QUINARY_TDM_RX_5	98
+#define QUINARY_TDM_TX_5	99
+#define QUINARY_TDM_RX_6	100
+#define QUINARY_TDM_TX_6	101
+#define QUINARY_TDM_RX_7	102
+#define QUINARY_TDM_TX_7	103
 
 #endif /* __DT_BINDINGS_Q6_AFE_H__ */
 
-- 
2.16.2



More information about the Alsa-devel mailing list