[alsa-devel] [PATCH v4 1/7] dt-bindings: clk: at91: add an I2S mux clock

[Codrin Ciubotariu]

The I2S mux clock can be used to select the I2S input clock. The
available parents are the peripheral and the generated clocks.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at microchip.com>
---
 .../devicetree/bindings/clock/at91-clock.txt       | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 51c259a..1c46b3c 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -90,6 +90,8 @@ Required properties:
 	"atmel,sama5d2-clk-audio-pll-pmc"
 		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
 		and can be used by peripheral clock or generic clock
+	"atmel,sama5d2-clk-i2s-mux":
+		at91 I2S clock source selection
 
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
@@ -507,3 +509,35 @@ For example:
 			atmel,clk-output-range = <0 83000000>;
 		};
 	};
+
+Required properties for I2S mux clocks:
+- #size-cells : shall be 0 (reg is used to encode I2S bus id).
+- #address-cells : shall be 1 (reg is used to encode I2S bus id).
+- name: device tree node describing a specific mux clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* clocks : shall be the mux clock parent phandles; shall be 2 phandles:
+	  peripheral and generated clock; the first phandle shall belong to the
+	  peripheral clock and the second one shall belong to the generated
+	  clock; "clock-indices" property can be user to specify
+	  the correct order.
+	* reg: I2S bus id of the corresponding mux clock.
+	  e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
+
+For example:
+	i2s_clkmux {
+		compatible = "atmel,sama5d2-clk-i2s-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2s0muxck: i2s0_muxclk {
+			clocks = <&i2s0_clk>, <&i2s0_gclk>;
+			#clock-cells = <0>;
+			reg = <0>;
+		};
+
+		i2s1muxck: i2s1_muxclk {
+			clocks = <&i2s1_clk>, <&i2s1_gclk>;
+			#clock-cells = <0>;
+			reg = <1>;
+		};
+	};
-- 
2.7.4